c语言控制台游戏

㈠ c语言中怎么写打地鼠的游戏

在一个二维数组中，存放标记。

设置难度：分:

• 一次只显示一个

• 一次只显示二个

• 一次只显示三个

对应产生2*N个随机数，对应(x,y),设置为1,其它空的设置为0.

大概的游戏流程循环:

结束条件： 打到M个停止。

1，产生随机数，且不相同

2，在对应的坐标中，画出地鼠，

在N秒内，没有击中，地鼠消失；击中，加分。

（击中的坐标，要与用户点的坐标想比较即可，在这个范围就得分）

㈡ 求c语言控制面板贪吃蛇源代码

//******友情提示:如想速度快点,请改小_sleep(500)函数中参数*****

#include <stdio.h>
#include <stdlib.h>
#include <conio.h>
#include <string.h>
#include <time.h>
const int H = 8; //地图的高
const int L = 16; //地图的长
char GameMap[H][L]; //游戏地图
int key; //按键保存
int sum = 1, over = 0; //蛇的长度, 游戏结束(自吃或碰墙)
int dx[4] = {0, 0, -1, 1}; //左、右、上、下的方向
int dy[4] = {-1, 1, 0, 0};
struct Snake //蛇的每个节点的数据类型
{
int x, y; //左边位置
int now; //保存当前节点的方向, 0,1,2,3分别为左右上下
}Snake[H*L];
const char Shead = '@'; //蛇头
const char Sbody = '#'; //蛇身
const char Sfood = '*'; //食物
const char Snode = '.'; //'.'在地图上标示为空
void Initial(); //地图的初始化
void Create_Food(); //在地图上随机产生食物
void Show(); //刷新显示地图
void Button(); //取出按键,并判断方向
void Move(); //蛇的移动
void Check_Border(); //检查蛇头是否越界
void Check_Head(int x, int y); //检查蛇头移动后的位置情况
int main()
{
Initial();
Show();
return 0;
}
void Initial() //地图的初始化
{
int i, j;
int hx, hy;
system("title 贪吃蛇"); //控制台的标题
memset(GameMap, '.', sizeof(GameMap)); //初始化地图全部为空'.'
system("cls");
srand(time(0)); //随机种子
hx = rand()%H; //产生蛇头
hy = rand()%L;
GameMap[hx][hy] = Shead;
Snake[0].x = hx; Snake[0].y = hy;
Snake[0].now = -1;
Create_Food(); //随机产生食物
for(i = 0; i < H; i++) //地图显示
{
for(j = 0; j < L; j++)
printf("%c", GameMap[i][j]);
printf("\n");
}

printf("\n小小C语言贪吃蛇\n");
printf("按任意方向键开始游戏\n");

getch(); //先接受一个按键,使蛇开始往该方向走
Button(); //取出按键,并判断方向
}
void Create_Food() //在地图上随机产生食物
{
int fx, fy;
while(1)
{
fx = rand()%H;
fy = rand()%L;

if(GameMap[fx][fy] == '.') //不能出现在蛇所占有的位置
{
GameMap[fx][fy] = Sfood;
break;
}
}
}
void Show() //刷新显示地图
{
int i, j;
while(1)
{
_sleep(500); //延迟半秒(1000为1s),即每半秒刷新一次地图
Button(); //先判断按键在移动
Move();
if(over) //自吃或碰墙即游戏结束
{
printf("\n**游戏结束**\n");
printf(" >_<\n");
getchar();
break;
}
system("cls"); //清空地图再显示刷新吼的地图
for(i = 0; i < H; i++)
{
for(j = 0; j < L; j++)
printf("%c", GameMap[i][j]);
printf("\n");
}

printf("\n小小C语言贪吃蛇\n");
printf("按任意方向键开始游戏\n");
}
}
void Button() //取出按键,并判断方向
{
if(kbhit() != 0) //检查当前是否有键盘输入，若有则返回一个非0值，否则返回0
{
while(kbhit() != 0) //可能存在多个按键,要全部取完,以最后一个为主
key = getch(); //将按键从控制台中取出并保存到key中
switch(key)
{ //左
case 75: Snake[0].now = 0;
break;
//右
case 77: Snake[0].now = 1;
break;
//上
case 72: Snake[0].now = 2;
break;
//下
case 80: Snake[0].now = 3;
break;
}
}
}
void Move() //蛇的移动
{
int i, x, y;
int t = sum; //保存当前蛇的长度
//记录当前蛇头的位置,并设置为空,蛇头先移动
x = Snake[0].x; y = Snake[0].y; GameMap[x][y] = '.';
Snake[0].x = Snake[0].x + dx[ Snake[0].now ];
Snake[0].y = Snake[0].y + dy[ Snake[0].now ];
Check_Border(); //蛇头是否越界
Check_Head(x, y); //蛇头移动后的位置情况,参数为: 蛇头的开始位置
if(sum == t) //未吃到食物即蛇身移动哦
for(i = 1; i < sum; i++) //要从蛇尾节点向前移动哦,前一个节点作为参照
{
if(i == 1) //尾节点设置为空再移动
GameMap[ Snake[i].x ][ Snake[i].y ] = '.';

if(i == sum-1) //为蛇头后面的蛇身节点,特殊处理
{
Snake[i].x = x;
Snake[i].y = y;
Snake[i].now = Snake[0].now;
}
else //其他蛇身即走到前一个蛇身位置
{
Snake[i].x = Snake[i+1].x;
Snake[i].y = Snake[i+1].y;
Snake[i].now = Snake[i+1].now;
}

GameMap[ Snake[i].x ][ Snake[i].y ] = '#'; //移动后要置为'#'蛇身
}
}
void Check_Border() //检查蛇头是否越界
{
if(Snake[0].x < 0 || Snake[0].x >= H
|| Snake[0].y < 0 || Snake[0].y >= L)
over = 1;
}
void Check_Head(int x, int y) //检查蛇头移动后的位置情况
{

if(GameMap[ Snake[0].x ][ Snake[0].y ] == '.') //为空
GameMap[ Snake[0].x ][ Snake[0].y ] = '@';
else
if(GameMap[ Snake[0].x ][ Snake[0].y ] == '*') //为食物
{
GameMap[ Snake[0].x ][ Snake[0].y ] = '@';
Snake[sum].x = x; //新增加的蛇身为蛇头后面的那个
Snake[sum].y = y;
Snake[sum].now = Snake[0].now;
GameMap[ Snake[sum].x ][ Snake[sum].y ] = '#';
sum++;
Create_Food(); //食物吃完了马上再产生一个食物
}
else
over = 1;
}

㈢ c璇瑷瀹炵幇鎺у埗鍙伴炴満澶ф垬娓告垙锛屾湁锷炴硶浣跨敤涓涓鍑芥暟瀹炵幇鎸変竴涓嬬┖镙煎彂涓棰楀瓙寮癸纻

缁椤瓙寮逛篃寮勪釜缁撴瀯浣掳纴瀛桦偍pos锛宻peed锛宭ength绛変俊鎭锛屽纰涓镟存柊(鏄剧ず)瀛愬脊镄勫嚱鏁帮纴鍦ㄤ富寰鐜閲屼笉鏂璋幂敤杩欎釜鍑芥暟

㈣ #高手往这看#用c语言编写俄罗斯方块代码，要能在codeblocks上运行的。

main.c里面
#include <stdio.h>
#include <stdlib.h>
#include "fangkuai.h"
#include <time.h>
int main()
{
Manager manager;
Control control;
initGame(&manager,&control);
do {
printPrompting();
printPoolBorder();
runGame(&manager,&control);
if(ifPlayAgain()){
SetConsoleTextAttribute(Output,0x7);
system("cls");
startGame(&manager,&control);
}
else{
break;
}
}
while(1);
gotoxyFull(0,0);
CloseHandle(Output);
return 0;
}
.h里面
#ifndef FANGKUAI_H_INCLUDED
#define FANGKUAI_H_INCLUDED

#include <stdio.h> //标准输入输出
#include <string.h> //字符数组
#include <stdlib.h> //标准库
#include <time.h> //日期和时间
#include <conio.h> //控制台输入输出
#include <windows.h> // windows控制台
#include <stdbool.h> //标准布尔函数
//定义句柄，结构体，数组；函数声明
//定义方块数组，[7][4],7种方块，每种4个状态
static const unsigned int TetrisTable[7][4]={
{0x4444,0x0f00,0x2222,0x00f0},
{0x04e0,0x4640,0x0720,0x0262},
{0x0446,0x0e80,0x6220,0x0170},
{0x0622,0x02e0,0x4460,0x0740},
{0x0630,0x0264,0x0c60,0x2640},
{0x0462,0x06c0,0x4620,0x0360},
{0x0660,0x0660,0x0660,0x0660},
};
typedef struct TetrisManger{
unsigned int pool[28];
int x;int y;
int type[3];
int orientation[3];
unsigned score;
unsigned erasedCount[4];
unsigned erasedTotal;
unsigned tetrisCount[7];
unsigned tetrisTotal;
bool dead;
}Manager;
static const unsigned int initTetrisPool[28]={
0xc003,0xc003,0xc003,0xc003,0xc003,0xc003,0xc003,
0xc003,0xc003,0xc003,0xc003,0xc003,0xc003,0xc003,
0xc003,0xc003,0xc003,0xc003,0xc003,0xc003,0xc003,
0xc003,0xc003,0xc003,0xc003,0xc003,0xffff,0xffff
};
typedef struct TetresControl{
bool pause;
bool clockwise;
int direction;
int color[28][16];
}Control;
HANDLE Output;
void initGame(Manager *manager,Control *control);
void gotoxyFull(short x,short y);
void printPrompting();
void printPoolBorder();
void printScore(const Manager *manager);
void printNextTetres(const Manager *manager);
void startGame(Manager *manager,Control *control);
void initTetris(Manager *manager);
void insertTetris(Manager *manager);
void setPoolColor(const Manager *manager,Control *control);
void printCurrentTetris(const Manager *manager,const Control *control);
void printTetrisPool(const Manager *manager,const Control *control);
bool checkCollision(const Manager *manager);
void removeTetris(Manager *manager);
void moveDownTetris(Manager *manager,Control *control);
void runGame(Manager *manager,Control *control);
void horzMoveTetris(Manager *manager,Control *control);
void keydownControl(Manager *manager,Control *control,int key);
void rotateTetris(Manager *manager,Control *control);
void dropTetris(Manager *manager,Control *control);
bool checkErasing(Manager *manager,Control *control);
bool ifPlayAgain();

#endif // FANGKUAI_H_INCLUDED

.c里面
#include "fangkuai.h"
#include <stdio.h>
#include <windows.h>
void initGame(Manager *manager,Control *control)//初始化游戏
{
SetConsoleTitle("俄罗斯方块"); //设置窗口标题
Output=GetStdHandle(STD_OUTPUT_HANDLE); //获取标准输出句柄
CONSOLE_CURSOR_INFO INFO; //定义光标属性结构体变量
INFO.dwSize=1; //设置光标高度值
INFO.bVisible=FALSE; //设置光标隐藏值
SetConsoleCursorInfo(Output,&INFO); //设置光标属性
startGame(manager,control);
}
//全角定位光标
void gotoxyFull(short x,short y) //全角方式定位
{
static COORD cd; //定义结构体变量
cd.X=2*x; //结构体变量 X=2x
cd.Y=y;
SetConsoleCursorPosition(Output,cd);//设置光标位置
}
//显示右下角按键提示信息
void printPrompting(){
SetConsoleTextAttribute(Output,0x0b);//设置显示颜色为蓝色光亮
gotoxyFull(26,10);
printf("■控制：");
gotoxyFull(27,12);
printf("□向左移动：← A 4");
gotoxyFull(27,13);
printf("□向右移动：→ D 6");
gotoxyFull(27,14);
printf("□向下移动：↓ S 2");
gotoxyFull(27,15);
printf("□顺时针转：↑ W 8");
gotoxyFull(27,16);
printf("□逆时针转：0");
gotoxyFull(27,17);
printf("□直接落地：空格");
gotoxyFull(27,18);
printf("□暂停游戏：回车");
gotoxyFull(26,23);
printf("■BY YU");
}
//显示游戏池白色边框
void printPoolBorder(){
SetConsoleTextAttribute(Output,0xF0);//设置背景色为白色高亮
int y=1;
for (y=1;y<23;y++){
gotoxyFull(10,y); //（10，1） 定位到（10，22）
printf("%2s","");
gotoxyFull(23,y); //（23，1）定位到（23，22）
printf("%2s","");
}
gotoxyFull(10,23);//底部一行
printf("%28s",""); //14个字符，每个两位，左边、右边白色，中间12
}
//显示得分、消行数、方块数
void printScore(const Manager *manager){
SetConsoleTextAttribute(Output,0x0E);//设置颜色为黄色高亮
gotoxyFull(2,2);
printf("■得分：%u",manager->score);
gotoxyFull(1,6);
printf("■消行总数：%u",manager->erasedTotal);
int i;
for (i=0;i<4;i++){
gotoxyFull(2,7+i);
printf("□消%d：%u",i+1,manager->erasedCount[i]);
}
gotoxyFull(1,15);
printf("■方块总数：%u",manager->tetrisTotal);
static const char *tetrisName="ITLJZSO";
for (i=0;i<7;i++){
gotoxyFull(2,17+i);
printf("□%c形：%u",tetrisName[i],manager->tetrisCount[i]);
}
}
void printNextTetres(const Manager *manager)//显示下一个，下下一个方块
{
SetConsoleTextAttribute(Output,0x0f);//设置前景色为白色高亮
gotoxyFull(26,1);
printf("┌─────────┬─────────┐");
gotoxyFull(26,2);
printf("│%9s│%9s│","","");
gotoxyFull(26,3);
printf("│%9s│%9s│","","");
gotoxyFull(26,4);
printf("│%9s│%9s│","","");
gotoxyFull(26,5);
printf("│%9s│%9s│","","");
gotoxyFull(26,6);
printf("└─────────┴─────────┘");
//显示下一个方块
unsigned int tetris ;
int i;
tetris=TetrisTable[manager->type[1]][manager->orientation[1]];
SetConsoleTextAttribute(Output,manager->type[1]|8);
for (i=0;i<16;i++){
gotoxyFull(27+(i&3),2+(i>>2));
((tetris<<i)&0x8000) ? printf("■"):printf("%2s","");
}
tetris=TetrisTable[manager->type[2]][manager->type[2]];
SetConsoleTextAttribute(Output,0x08);
for(i=0;i<16;i++){
gotoxyFull(32+(i&3),2+(i>>2));
((tetris<<i)&0x8000)?printf("■"):printf("%2s","");
}
}
void startGame(Manager *manager,Control *control)//开始游戏
{
memset(manager,0,sizeof(Manager));
memcpy(manager->pool,initTetrisPool,sizeof(unsigned int [28]));//复制游戏池数据
srand((unsigned)time(NULL));//设置随机数种子
manager->type[1]=rand()%7;//下一个方块类型
manager->orientation[1]=rand()%4;//下一个方块状态
manager->type[2]=rand()%7;//下下一个方块类型
manager->orientation[2]=rand()%4;//下下一个方块状态
memset(control,0,sizeof(Control));//初始化控制结构体为0
initTetris(manager); //初始化方块
setPoolColor(manager,control);//初始化方块，若没有碰撞，插入方块，需要设置颜色
}
void initTetris(Manager *manager)//出第一个方块
{
unsigned int tetris;
manager->type[0]=manager->type[1];
manager->orientation[0]=manager->orientation[1];
manager->type[1]=manager->type[2];
manager->orientation[1]=manager->orientation[2];
manager->type[2]=rand()%7;
manager->orientation[2]=rand()%4;
tetris=TetrisTable[manager->type[0]][manager->orientation[0]];
manager->x=6;
manager->y=4;
if(checkCollision(manager)){
manager->dead=true;
}
else{
insertTetris(manager);
}
++manager->tetrisTotal;
++manager->tetrisCount[manager->type[0]];
printNextTetres(manager);
printScore(manager);
}
//插入方块到游戏池
void insertTetris(Manager *manager){
unsigned int tetris=TetrisTable[manager->type[0]][manager->orientation[0]];//相对于y的位置
manager->pool[manager->y+0]|=(((tetris<<0x0)&0xF000)>>manager->x);//或等于
manager->pool[manager->y+1]|=(((tetris<<0x4)&0xF000)>>manager->x);
manager->pool[manager->y+2]|=(((tetris<<0x8)&0xF000)>>manager->x);
manager->pool[manager->y+3]|=(((tetris<<0xc)&0xF000)>>manager->x);
}
//设置游戏颜色
void setPoolColor(const Manager *manager, Control *control){
int i,x,y;
/* i 当前方块值 0----15
x 设置颜色的列 x=manager->x+&3
y 设置颜色的行 y=manager->y+i>>2 */
unsigned int tetris;
tetris=TetrisTable[manager->type[0]][manager->orientation[0]];
for(i=0;i<16;i++){
y=manager->y+(i>>2);
if(y>25){
break;
}
x=manager->x+(i&3);
if((tetris<<i)&0x8000){
control->color[y][x]=(manager->type[0]|8);
}
}
}
//显示当前方块
void printCurrentTetris(const Manager *manager,const Control *control){
int x,y;
y=(manager->y>4)?(manager->y-1):4;
for (;y<26&&y<manager->y+4;y++){
x=(manager->x>2)?(manager->x-1):2;
for (;x<14&x<manager->x+5;x++) {
gotoxyFull(x+9,y-3);
if((manager->pool[y]<<x) & 0x8000){
SetConsoleTextAttribute(Output,control->color[y][x]);
printf("■");
}
else{
SetConsoleTextAttribute(Output,0);
printf("%2s","");
}
}
}
}
//显示游戏池
void printTetrisPool(const Manager *manager,const Control *control){
int x,y;
for(y=4;y<26;y++)
{
gotoxyFull(11,y-3);
for(x=2;x<14;x++)
{
if((manager->pool[y]<<x) & 0x8000)
{
SetConsoleTextAttribute(Output,control->color[y][x]);
printf("■");
}
else {
SetConsoleTextAttribute(Output,0);
printf("%2s","");
}
}
}
}
//碰撞检测
bool checkCollision(const Manager *manager){
unsigned int tetris;
tetris=TetrisTable[manager->type[0]][manager->orientation[0]];//准备插入的当前方块
unsigned int dest;//游戏池中4行4列的值
dest=0;
dest|=(((manager->pool[manager->y+0]<<manager->x)&0xF000)>>0x0);
dest|=(((manager->pool[manager->y+1]<<manager->x)&0xF000)>>0x4);//左移x,右移4
dest|=(((manager->pool[manager->y+2]<<manager->x)&0xF000)>>0x8);
dest|=(((manager->pool[manager->y+3]<<manager->x)&0xF000)>>0xc);
return((dest&tetris)!=0);
}
//移除方块
void removeTetris(Manager *manager){
unsigned int tetris;
tetris=TetrisTable[manager->type[0]][manager->orientation[0]];//准备插入的当前方块，当前方块值
manager->pool[manager->y+0]&=~(((tetris<<0x0)&0xF000)>>manager->x);//左移0保留 最高，其余清零，右移x，游戏中方块列位置，取反，原来&后面，存
manager->pool[manager->y+1]&=~(((tetris<<0x4)&0xF000)>>manager->x);
manager->pool[manager->y+2]&=~(((tetris<<0x8)&0xF000)>>manager->x);
manager->pool[manager->y+3]&=~(((tetris<<0xc)&0xF000)>>manager->x);
}
//向下移动方块
void moveDownTetris(Manager *manager,Control *control){
int y=manager->y;
removeTetris(manager);
++manager->y;
if(checkCollision(manager)){
manager->y=y;
insertTetris(manager);
if(checkErasing(manager,control))
{
printTetrisPool(manager,control);
}
}
else{
insertTetris(manager);
setPoolColor(manager,control);
printCurrentTetris(manager,control);
}
}
//运行游戏
void runGame(Manager *manager,Control *control){
clock_t clockNow,clockLast;
clockLast=clock();
printTetrisPool(manager,control);
while (!manager->dead){
while(_kbhit()){
keydownControl(manager,control,getch());
}
if (!control->pause){
clockNow=clock();
if(clockNow-clockLast>0.45F*CLOCKS_PER_SEC){
clockLast=clockNow;
moveDownTetris(manager,control);
}
}
}
}

㈤ 谁有能在vc++6.0上运行的c语言小游戏代码

最基础的贪吃蛇的代码

#include<stdio.h>
#include<windows.h>//基本型态定义。支援型仔明态定义函数。使用者界面函数 图形装置界面函数。
#include<conio.h> //用户通过按键盘产生的对应操作 (控制台）
#include<stdlib.h>
#include<time.h> //日期和时间头文件
#define LEN 30
#define WID 25
int Snake[LEN][WID] = {0}; //数组的元素代表蛇的各个部位
char Sna_Hea_Dir = 'a';//记录蛇头的移动方向
int Sna_Hea_X, Sna_Hea_Y;//记录蛇头的位置
int Snake_Len = 3;//记录蛇的长度
clock_t Now_Time;//记录当前时间，以便自动移动
int Wait_Time ;//记录自动移动的时间间隔
int Eat_Apple = 1;//吃到苹果表示为1
int Level ;
int All_Score = -1;
int Apple_Num = -1;
HANDLE hConsole = GetStdHandle(STD_OUTPUT_HANDLE); //获取标准输出的句柄 <windows.h>
//句柄 ：标志应用程序中的不同对象和同类对象中的不同的实例 方便操控，
void gotoxy(int x, int y)//设置光标位置
{
COORD pos = {x,y}; //定义一个字符在控制台屏幕上的坐标POS

SetConsoleCursorPosition(hConsole, pos); //定位光标位置的函数<windows.h>

}

void Hide_Cursor()//隐藏光标 固定函数
{
CONSOLE_CURSOR_INFO cursor_info = {1, 0};
SetConsoleCursorInfo(hConsole, &cursor_info);
}

void SetColor(int color)//设置颜色
{
SetConsoleTextAttribute(hConsole, color);
//是API设置字体颜色和背景色的函数 格式：SetConsoleTextAttribute(句柄,颜色);
}

void Print_Snake()//打印蛇头和蛇的脖子和蛇尾
{
int iy, ix, color;
for(iy = 0; iy < WID; ++iy)
for(ix = 0; ix < LEN; ++ix)
{

if(Snake[ix][iy] == 1)//蛇头
{
SetColor(0xf); //oxf代庆搏表分配的内存地址 setcolor:34行自定义设置颜色的函数
gotoxy(ix*2, iy);
printf("※");
}
if(Snake[ix][iy] == 2)//蛇的脖子
{
color = rand()%15 + 1; //rand()函数是产生随机念差告数的一个随机函数。C语言里还有 srand()函数等。
//头文件:stdlib.h
if(color == 14)
color -= rand() % 13 + 1; //变色
SetColor(color);
gotoxy(ix*2, iy);
printf("■");
}
if(Snake[ix][iy] == Snake_Len)
{
gotoxy(ix*2, iy);
SetColor(0xe);
printf("≈");
}
}
}

void Clear_Snake()//擦除贪吃蛇
{
int iy, ix;
for(iy = 0; iy < WID; ++iy)
for(ix = 0; ix < LEN; ++ix)
{
gotoxy(ix*2, iy);
if(Snake[ix][iy] == Snake_Len)
printf(" ");
}
}

void Rand_Apple()//随机产生苹果
{
int ix, iy;

do
{
ix = rand() % LEN;
iy = rand() % WID;
}while(Snake[ix][iy]);

Snake[ix][iy] = -1;
gotoxy(ix*2, iy);
printf("⊙");
Eat_Apple = 0;
}

void Game_Over()//蛇死掉了
{
gotoxy(30, 10);
printf("Game Over");
Sleep(3000);
system("pause > nul");
exit(0);
}

void Move_Snake()//让蛇动起来
{
int ix, iy;

for(ix = 0; ix < LEN; ++ix)//先标记蛇头
for(iy = 0; iy < WID; ++iy)
if(Snake[ix][iy] == 1)
{
switch(Sna_Hea_Dir)//根据新的蛇头方向标志蛇头
{
case 'w':
if(iy == 0)
Game_Over();
else
Sna_Hea_Y = iy - 1;
Sna_Hea_X = ix;

break;
case 's':
if(iy == (WID -1))
Game_Over();
else
Sna_Hea_Y = iy + 1;
Sna_Hea_X = ix;

break;
case 'a':
if(ix == 0)
Game_Over();
else
Sna_Hea_X = ix - 1;
Sna_Hea_Y = iy;

break;
case 'd':
if(ix == (LEN - 1))
Game_Over();
else
Sna_Hea_X = ix + 1;
Sna_Hea_Y = iy;

break;
default:
break;
}
}

if(Snake[Sna_Hea_X][Sna_Hea_Y]!=1&&Snake[Sna_Hea_X][Sna_Hea_Y]!=0&&Snake[Sna_Hea_X][Sna_Hea_Y]!=-1)
Game_Over();

if(Snake[Sna_Hea_X][Sna_Hea_Y] < 0)//吃到苹果
{
++Snake_Len;
Eat_Apple = 1;
}
for(ix = 0; ix < LEN; ++ix)//处理蛇尾
for(iy = 0; iy < WID; ++iy)
{
if(Snake[ix][iy] > 0)
{
if(Snake[ix][iy] != Snake_Len)
Snake[ix][iy] += 1;
else
Snake[ix][iy] = 0;
}
}

Snake[Sna_Hea_X][Sna_Hea_Y] = 1;//处理蛇头
}

void Get_Input()//控制蛇的移动方向
{
if(kbhit())
{
switch(getch())
{
case 87:

Sna_Hea_Dir = 'w';
break;
case 83:

Sna_Hea_Dir = 's';
break;
case 65:

Sna_Hea_Dir = 'a';
break;
case 68:

Sna_Hea_Dir = 'd';
break;
default:
break;
}
}

if(clock() - Now_Time >= Wait_Time)//蛇到时间自动行走
{
Clear_Snake();
Move_Snake();
Print_Snake();
Now_Time = clock();
}
}

void Init()//初始化
{
system("title 贪吃毛毛蛇");
system("mode con: cols=80 lines=25");
Hide_Cursor();

gotoxy(61, 4);
printf("You Score:");
gotoxy(61, 6);
printf("You Level:");
gotoxy(61, 8);
printf("The Lenght:");
gotoxy(61, 10);
printf("The Speed:");
gotoxy(61, 12);
printf("Apple Num:");

int i;
for(i = 0; i < Snake_Len; ++i)//生成蛇
Snake[10+i][15] = i+1;

int iy, ix;//打印蛇
for(iy = 0; iy < WID; ++iy)
for(ix = 0; ix < LEN; ++ix)
{
if(Snake[ix][iy])
{
SetColor(Snake[ix][iy]);
gotoxy(ix*2, iy);
printf("■");
}
}
}

void Pri_News()//打印信息
{
SetColor(0xe);
gotoxy(73,4);
All_Score += Level;
printf("%3d", All_Score);
gotoxy(73, 6);
printf("%3d", Level);
gotoxy(73, 8);
printf("%3d",Snake_Len);
gotoxy(73, 10);
printf("0.%3ds", Wait_Time/10);
gotoxy(73, 12);
printf("%d", Apple_Num);
}

void Lev_Sys()//等级系统
{
if(((Apple_Num-1) / 10) == Level)
{
++Level;
if(Wait_Time > 50)
Wait_Time -= 50;
else
if(Wait_Time > 10)
Wait_Time -= 10;
else
Wait_Time -= 1;
}
}

int main(void)
{
Init();
srand((unsigned)time(NULL));//设置随机数的种子
Now_Time = clock();
int speed1=1000,speed2,a;
printf("\n");
printf("请输入你想要的速度\n");
scanf("%d",&speed2);
Level=1;
Wait_Time=speed1-speed2;
printf("请输入你想要的苹果数\n");
scanf("%d",&a);

while(a--)
Rand_Apple();
while(1)
{
if(Eat_Apple)
{
++Apple_Num;
Rand_Apple();
Lev_Sys();
Pri_News();
}
Get_Input();
Sleep(10);
}
return 0;
}