c语言移动鼠标

1. c语言鼠标移动

SetCursorPos( x,y ); 移动鼠标到x,y位置
mouse_event( MOUSEEVENTF_LEFTDOWN, x,y,0,0 ); 左键按下
mouse_event( MOUSEEVENTF_RIGHTDOWN, x,y,0,0 ); 右键按下
如果要捕捉鼠标的移动，一般采用勾子程序，详情，请查阅鼠标勾子代码

2. c语言 怎样模拟鼠标键盘操作

函数原型：
VOID keybd_event( BYTE bVk, BYTE bScan, DWORD dwFlags, DWORD dwExtraInfo );
4个参数都是输入参数。
bVk：键名，例如： VK_NUMPAD7，VK_BACK， VK_TAB，VK_SHIFT，VK_F1，。。。
keybd_event(VK_MENU,0xb8,0 , 0); -- 按下Alt 键
keybd_event(VK_MENU,0xb8,KEYEVENTF_KEYUP,0); -- 放开 Alt 键 （复位，弹上来）
===
下面程序模拟按 notepad 编辑器。等于C语言 system("notepad"); 弹出 记事本。
void simu_notepad()
{
keybd_event(VkKeyScan('N'),1,0,0);
keybd_event(VkKeyScan('N'),1,KEYEVENTF_KEYUP,0);
keybd_event(VkKeyScan('O'),0x98,0,0); keybd_event(VkKeyScan('O'),0x98,KEYEVENTF_KEYUP,0);
keybd_event(VkKeyScan('T'),0x94,0,0); keybd_event(VkKeyScan('T'),0x94,KEYEVENTF_KEYUP,0);
keybd_event(VkKeyScan('E'),0x92,0,0); keybd_event(VkKeyScan('E'),0x92,KEYEVENTF_KEYUP,0);
keybd_event(VkKeyScan('P'),0x99,0,0); keybd_event(VkKeyScan('P'),0x99,KEYEVENTF_KEYUP,0);
keybd_event(VkKeyScan('A'),0x9E,0,0); keybd_event(VkKeyScan('A'),0x9E,KEYEVENTF_KEYUP,0);
keybd_event(VkKeyScan('D'),0xA0,0,0); keybd_event(VkKeyScan('D'),0xA0,KEYEVENTF_KEYUP,0);
keybd_event(VK_RETURN,1,0,0);
keybd_event(VK_RETURN,1,KEYEVENTF_KEYUP,0);
}