des加密c
/* d3des.h -
*
* Headers and defines for d3des.c
* Graven Imagery, 1992.
*
* Copyright (c) 1988,1989,1990,1991,1992 by Richard Outerbridge
* (GEnie : OUTER; CIS : [71755,204])
*/
#define D2_DES /* include double-length support */
#define D3_DES /* include triple-length support */
#ifdef D3_DES
#ifndef D2_DES
#define D2_DES /* D2_DES is needed for D3_DES */
#endif
#endif
#define EN0 0 /* MODE == encrypt */
#define DE1 1 /* MODE == decrypt */
/* A useful alias on 68000-ish machines, but NOT USED HERE. */
typedef union {
unsigned long blok[2];
unsigned short word[4];
unsigned char byte[8];
} M68K;
extern void deskey(unsigned char *, short);
/* hexkey[8] MODE
* Sets the internal key register according to the hexadecimal
* key contained in the 8 bytes of hexkey, according to the DES,
* for encryption or decryption according to MODE.
*/
extern void usekey(unsigned long *);
/* cookedkey[32]
* Loads the internal key register with the data in cookedkey.
*/
extern void cpkey(unsigned long *);
/* cookedkey[32]
* Copies the contents of the internal key register into the storage
* located at &cookedkey[0].
*/
extern void des(unsigned char *, unsigned char *);
/* from[8] to[8]
* Encrypts/Decrypts (according to the key currently loaded in the
* internal key register) one block of eight bytes at address 'from'
* into the block at address 'to'. They can be the same.
*/
#ifdef D2_DES
#define desDkey(a,b) des2key((a),(b))
extern void des2key(unsigned char *, short);
/* hexkey[16] MODE
* Sets the internal key registerS according to the hexadecimal
* keyS contained in the 16 bytes of hexkey, according to the DES,
* for DOUBLE encryption or decryption according to MODE.
* NOTE: this clobbers all three key registers!
*/
extern void Ddes(unsigned char *, unsigned char *);
/* from[8] to[8]
* Encrypts/Decrypts (according to the keyS currently loaded in the
* internal key registerS) one block of eight bytes at address 'from'
* into the block at address 'to'. They can be the same.
*/
extern void D2des(unsigned char *, unsigned char *);
/* from[16] to[16]
* Encrypts/Decrypts (according to the keyS currently loaded in the
* internal key registerS) one block of SIXTEEN bytes at address 'from'
* into the block at address 'to'. They can be the same.
*/
extern void makekey(char *, unsigned char *);
/* *password, single-length key[8]
* With a double-length default key, this routine hashes a NULL-terminated
* string into an eight-byte random-looking key, suitable for use with the
* deskey() routine.
*/
#define makeDkey(a,b) make2key((a),(b))
extern void make2key(char *, unsigned char *);
/* *password, double-length key[16]
* With a double-length default key, this routine hashes a NULL-terminated
* string into a sixteen-byte random-looking key, suitable for use with the
* des2key() routine.
*/
#ifndef D3_DES /* D2_DES only */
#define useDkey(a) use2key((a))
#define cpDkey(a) cp2key((a))
extern void use2key(unsigned long *);
/* cookedkey[64]
* Loads the internal key registerS with the data in cookedkey.
* NOTE: this clobbers all three key registers!
*/
extern void cp2key(unsigned long *);
/* cookedkey[64]
* Copies the contents of the internal key registerS into the storage
* located at &cookedkey[0].
*/
#else /* D3_DES too */
#define useDkey(a) use3key((a))
#define cpDkey(a) cp3key((a))
extern void des3key(unsigned char *, short);
/* hexkey[24] MODE
* Sets the internal key registerS according to the hexadecimal
* keyS contained in the 24 bytes of hexkey, according to the DES,
* for DOUBLE encryption or decryption according to MODE.
*/
extern void use3key(unsigned long *);
/* cookedkey[96]
* Loads the 3 internal key registerS with the data in cookedkey.
*/
extern void cp3key(unsigned long *);
/* cookedkey[96]
* Copies the contents of the 3 internal key registerS into the storage
* located at &cookedkey[0].
*/
extern void make3key(char *, unsigned char *);
/* *password, triple-length key[24]
* With a triple-length default key, this routine hashes a NULL-terminated
* string into a twenty-four-byte random-looking key, suitable for use with
* the des3key() routine.
*/
#endif /* D3_DES */
#endif /* D2_DES */
‘贰’ c语言DES加密信息得到密文，java语言解密这段密文。
只要算法和密钥相同，必然可以解密成功
‘叁’ DES加密算法C语言实现
/*********************************************************************/
/*-文件名：des.h */
/*- */
/*-功能： 实现DES加密算法的加密解密功能 */
/*********************************************************************/
typedef int INT32;
typedef char INT8;
typedef unsigned char ULONG8;
typedef unsigned short ULONG16;
typedef unsigned long ULONG32;
/*如果采用c++编译器的话采用如下宏定义
#define DllExport extern "C" __declspec(dllexport)
*/
#define DllExport __declspec(dllexport)
/*加密接口函数*/
DllExport INT32 DdesN(ULONG8 *data, ULONG8 **key, ULONG32 n_key,ULONG32 readlen);
DllExport INT32 desN(ULONG8 *data, ULONG8 **key, ULONG32 n_key,ULONG32 readlen);
DllExport INT32 des3(ULONG8 *data, ULONG8 *key,ULONG32 n ,ULONG32 readlen);
DllExport INT32 Ddes3(ULONG8 *data,ULONG8 *key,ULONG32 n ,ULONG32 readlen);
DllExport INT32 des(ULONG8 *data, ULONG8 *key,INT32 readlen);
DllExport INT32 Ddes(ULONG8 *data,ULONG8 *key,INT32 readlen);
*********************************************************************/
/*-文件名：des.c */
/*- */
/*-功能： 实现DES加密算法的加密解密功能 */
//*********************************************************************/
＃include <stdlib.h>
＃include <stdio.h>
＃include <string.h>
＃include <memory.h>
＃include <malloc.h>
＃include "des.h"
#define SUCCESS 0
#define FAIL -1
#define READFILESIZE 512
#define WZ_COMMEND_NUM 4
#define WZUSEHELPNUM 19
#define DESONE 1
#define DESTHREE 2
#define DESMULTI 3
INT8 *WZ_Commend_Help[] =
{
"基于DES的加密解密工具v1.0 ",/*0*/
"追求卓越,勇于创新 ",
"----着者 : 吴真--- ",
" "
};
INT8 *WZ_USE_HELP[]={
"输入5+n个参数:",
"\t1.可执行文件名 *.exe",
"\t2.操作类型 1:一层加密;2:一层解密;",
"\t\t13:N层单密钥加密;23:N层单密钥解密;",
"\t\t39:N层多密钥加密;49:N层多密钥解密",
"\t3.读出数据的文件名*.txt",
"\t4.写入数据的文件名*.txt",
"\t5.密钥(8字节例如:wuzhen12)",
"\t[6].N层单密钥的层数或者...二层加密|解密密钥",
"\t[7].三层加密|解密密钥",
"\t[8]. ...",
"\t[N].N层加密|解密密钥",
"\t 例1: des 1 1.txt 2.txt 12345678",
"\t : des 2 2.txt 3.txt 12345678",
"\t 例2: des 13 1.txt 2.txt tiantian 5",
"\t : des 23 2.txt 3.txt tiantian 5",
"\t 例3: des 39 1.txt 2.txt 12345678 tiantian gaoxinma",
"\t : des 49 2.txt 3.txt 12345678 tiantian gaoxinma",
"******************************"
};
INT32 hextofile( ULONG8 *buf ,FILE *writefile, ULONG32 length);/*以16进制写入文件*/
INT32 encodehex(ULONG8 *tobuf,ULONG8 *frombuf,ULONG32 len);/*16进制解码*/
INT32 file_enc(FILE *readfile,FILE *writefile,
ULONG8 *key,ULONG32 keynum,
ULONG8 **superkey,ULONG32 n_superkey,
ULONG8 flag);
INT32 file_dec(FILE *readfile,FILE *writefile,
ULONG8 *key,ULONG32 keynum,
ULONG8 **superkey,ULONG32 n_superkey,
ULONG8 flag);
void wz_print_help();
INT32 main(INT32 argc,INT8 *argv[])
{
INT8 *FILENAME1,*FILENAME2;
FILE *fp, *fp2;
ULONG8 *key ;
ULONG8 **superkey ;/*n层加密解密密钥*/
ULONG8 n_superkey ;
ULONG32 num;
if ( argc >= 5 && (atoi(argv[1]) == 39 || atoi(argv[1]) == 49 ) )
{
n_superkey = argc - 4 ;
superkey = ( INT8 **)calloc(1, n_superkey*sizeof( void *) ) ;
for ( num = 0 ; num < n_superkey ; num++)
{
superkey[num] = argv[4+num] ;
}
}
else if ( argc == 6 && (atoi(argv[1]) == 13 || atoi(argv[1]) == 23 ) && (atoi(argv[5])) > 0)
{
}
else if ( argc == 5 && ( atoi(argv[1]) == 1 || atoi(argv[1]) == 2 ))
{
}
else
{
wz_print_help();
return FAIL;
}
FILENAME1 = argv[2];
FILENAME2 = argv[3];
if ((fp= fopen(FILENAME1,"rb")) == NULL || (fp2 = fopen(FILENAME2,"wb"))==NULL)
{
printf("Can't open file\n");
return FAIL;
}
key = argv[4] ;
switch( atoi(argv[1] ))
{
case 1: /*加密*/
file_enc(fp,fp2,key,0, NULL,0, DESONE);
printf("\n \tDES 一层加密完毕,密文存于%s文件\n",FILENAME2);
break;
case 2:
file_dec(fp,fp2,key,0, NULL, 0,DESONE);
printf("\n \tDES 一层解密完毕,密文存于%s文件\n",FILENAME2);
break;
case 13:
file_enc(fp,fp2,key,atoi(argv[5]),NULL,0,DESTHREE);
printf("\n \tDES %u层单密钥加密完毕,密文存于%s文件\n",atoi(argv[5]),FILENAME2);
break;
case 23:
file_dec(fp,fp2,key,atoi(argv[5]),NULL,0,DESTHREE);
printf("\n \tDES %u层单密钥解密完毕,密文存于%s文件\n",atoi(argv[5]),FILENAME2);
break;
case 39:
file_enc(fp,fp2,NULL,0,superkey,n_superkey,DESMULTI);
printf("\n \tDES 多密钥加密完毕,密文存于%s文件\n",FILENAME2);
free(superkey);
superkey = NULL;
break;
case 49:
file_dec(fp,fp2,NULL,0,superkey,n_superkey,DESMULTI);
printf("\n \tDES 多密钥加密完毕,密文存于%s文件\n",FILENAME2);
free(superkey);
superkey = NULL;
break;
default:
printf("请选择是加密|解密 plese choose encrypt|deencrypt\n");
break;
}
fclose(fp);
fclose(fp2);
return SUCCESS;
}
void wz_print_help()
{
INT32 i ;
printf("\t");
for ( i = 0 ; i < 22 ; i++)
{
printf("%c ",5);
}
printf("\n");
for( i = 0 ; i < WZ_COMMEND_NUM ; i++)
{
printf("\t%c\t%s %c\n",5,WZ_Commend_Help[i],5);
}
printf("\t");
for ( i = 0 ; i < 22 ; i++)
{
printf("%c ",5);
}
printf("\n");
for( i = 0 ; i < WZUSEHELPNUM ; i++)
{
printf("\t%s\n",WZ_USE_HELP[i]);
}
return ;
}
INT32 file_enc(FILE *readfile,FILE *writefile,
ULONG8 *key,ULONG32 keynum,
ULONG8 **superkey,ULONG32 n_superkey,
ULONG8 flag)
{
INT32 filelen = 0,readlen = 0,writelen = 0;
ULONG32 totalfilelen = 0 ;/*统计实际的文件的长度*/
ULONG8 readbuf[READFILESIZE] = { 0 };
filelen = fread( readbuf, sizeof( INT8 ), READFILESIZE, readfile );
while( filelen == READFILESIZE )
{
totalfilelen += READFILESIZE;
switch(flag)
{
case DESONE:
des( readbuf,key,READFILESIZE);
break;
case DESTHREE:
des3( readbuf, key ,keynum,READFILESIZE);
break;
case DESMULTI:
desN( readbuf, superkey ,n_superkey,READFILESIZE);
break;
}
hextofile( readbuf, writefile, READFILESIZE );/*以16进制形式写入文件*/
memset(readbuf,0,READFILESIZE);
filelen = fread( readbuf, sizeof( INT8 ), READFILESIZE, readfile );
}
/*这是从文件中读出的最后一批数据,长度可能会等于0,所以要先判断*/
if ( filelen > 0 )
{
/*如果从文件中读出的长度不等于0,那么肯定有8个字节以上的空间
文件长度存在最后8个字节中*/
totalfilelen += filelen;
memcpy( &readbuf[READFILESIZE-8], (ULONG8*)&totalfilelen,4);
switch(flag)
{
case DESONE:
des( readbuf,key,READFILESIZE);
break;
case DESTHREE:
des3( readbuf, key ,keynum,READFILESIZE);
break;
case DESMULTI:
desN( readbuf, superkey ,n_superkey,READFILESIZE);
break;
}
hextofile( readbuf, writefile,READFILESIZE );/*以16进制形式写入文件*/
memset(readbuf,0 ,READFILESIZE);
}
else /*filelen == 0*/
{
memcpy( &readbuf[0], (ULONG8*)&totalfilelen,4);
switch(flag)
{
case DESONE:
des( readbuf,key,8);
break;
case DESTHREE:
des3( readbuf, key ,keynum,8);
break;
case DESMULTI:
desN( readbuf, superkey ,n_superkey,8);
break;
}
hextofile( readbuf, writefile, 8);/*以16进制形式写入文件*/
}
return SUCCESS;
}
INT32 file_dec(FILE *readfile,FILE *writefile,
ULONG8 *key,ULONG32 keynum,
ULONG8 **superkey,ULONG32 n_superkey,
ULONG8 flag)
{
INT32 filelen = 0,readlen = 0,writelen = 0;
ULONG32 totalfilelen = 0 ;/*统计实际的文件的长度*/
INT32 num = 0;
ULONG8 readbuf[READFILESIZE] = { 0 };
ULONG8 sendbuf[READFILESIZE*2] = { 0 };
fseek(readfile,-16,SEEK_END);/*最后16个字节的表示文件长度的空间*/
filelen = fread( sendbuf, sizeof( INT8 ), 16, readfile );
encodehex( readbuf,sendbuf,8);
switch(flag)
{
case DESONE:
Ddes( readbuf,key,8);
break;
case DESTHREE:
Ddes3( readbuf, key ,keynum,8);
break;
case DESMULTI:
DdesN( readbuf, superkey ,n_superkey,8);
break;
}
/*解密*/
memcpy((ULONG8*)&totalfilelen, &readbuf[0],4);/*得到文件总长*/
memset(readbuf,0 ,8);
memset(sendbuf,0 ,16);
num = totalfilelen/READFILESIZE;/*有几个READFILESIZE组*/
totalfilelen %= READFILESIZE;
fseek(readfile,0,SEEK_SET);/*跳到文件头*/
while(num--)
{
filelen = fread( sendbuf, sizeof( INT8 ), READFILESIZE*2, readfile );
encodehex( readbuf,sendbuf,READFILESIZE);
switch(flag)
{
case DESONE:
Ddes( readbuf,key,READFILESIZE);
break;
case DESTHREE:
Ddes3( readbuf, key ,keynum,READFILESIZE);
break;
case DESMULTI:
DdesN( readbuf, superkey ,n_superkey,READFILESIZE);
break;
}
writelen = fwrite(readbuf, sizeof( INT8 ), READFILESIZE, writefile);
memset(readbuf,0 ,READFILESIZE);
memset(sendbuf,0 ,READFILESIZE*2);
}
if ( totalfilelen > 0 )/*最后一块有多余的元素*/
{
filelen = fread( sendbuf, sizeof( INT8 ), READFILESIZE*2, readfile );
encodehex( readbuf,sendbuf,READFILESIZE);
switch(flag)
{
case DESONE:
Ddes( readbuf,key,READFILESIZE);
break;
case DESTHREE:
Ddes3( readbuf, key ,keynum,READFILESIZE);
break;
case DESMULTI:
DdesN( readbuf, superkey ,n_superkey,READFILESIZE);
break;
}
writelen = fwrite(readbuf, sizeof( INT8 ), totalfilelen, writefile);
memset(readbuf,0 ,READFILESIZE);
memset(sendbuf,0 ,READFILESIZE*2);
}
return SUCCESS;
}
INT32 hextofile( ULONG8 *buf ,FILE *writefile, ULONG32 length)
{
ULONG32 writelen = 0 ;
/*以16进制形式写入文件*/
while( writelen < length)
{
if(buf[writelen] == 0)
{
fprintf( writefile, "%x", 0 );
fprintf( writefile, "%x", 0 );
}
else if (buf[writelen] < 0x10)
{
fprintf( writefile, "%x", 0 );
fprintf( writefile, "%x", buf[writelen] );
}
else
{
fprintf( writefile, "%x", buf[writelen] );
}
writelen++;
}
return SUCCESS;
}
INT32 encodehex(ULONG8 *tobuf,ULONG8 *frombuf,ULONG32 len)
{
ULONG8 *readfirst = frombuf ;
ULONG8 *readend = &frombuf[1] ;
INT8 *s;
ULONG8 y[2] ;
ULONG32 i;
for ( i = 0 ; i < len ; i++)
{
y[0] = *readfirst ;
y[1] = *readend ;
readfirst += 2 ;
readend += 2 ;
tobuf[i] = (ULONG8)strtol((INT8*)y, &s, 16);
}
return SUCCESS;
}
‘肆’ Des加密解密方法 用java C#和C++三种方式实现
Solaris下的系统，有一个用C做的加密工具，调用Sunwcry的des(1)对文件进行加密，然后在java中对文件进行解密。java中用的是标准的DES/CBC/NoPadding算法，可是解密后发现开头有8byte的数据出错了，请高人指点一下。
cbc_encrypt.c ： 加密用的C程序
cbc_decrypt.c：解密用的C程序
TestDescbc.java：解密用的java程序
Test01.dat原始文件
Test03.dat cbc_encrypt加密后的文件
Test05.dat cbc_decrypt解密后的文件
Test06.dat TestDescbc解密后的文件
‘伍’ 用c语言写des加密算法
#include <stdio.h> #include <string.h> #include <windows.h> #include <conio.h> #include "Schedle.h" class CShift{ public: DWORDLONG mask[16]; int step[16]; CShift(){ for(int i=0;i<16;i++){ step[i]=2; mask[i]=0xc000000; } step[0]=step[1]=step[8]=step[15]=1; mask[0]=mask[1]=mask[8]=mask[15]=0x8000000; } }; class CDES{ public: CDES(){ m_dwlKey=0; m_dwlData=0; ConvertTableToMask(dwlKey_PC_1,64); //PrintTable(dwlKey_PC_1,7,8); ConvertTableToMask(dwlKey_PC_2,56); ConvertTableToMask(dwlData_IP,64); ConvertTableToMask(dwlData_Expansion,32); ConvertTableToMask(dwlData_FP,64); ConvertTableToMask(dwlData_P,32); Generate_S(); } void PrintBit(DWORDLONG); void EncryptKey(char *); unsigned char* EncryptData(unsigned char *); unsigned char* DescryptData(unsigned char*); private: void ConvertTableToMask(DWORDLONG *,int); void Generate_S(void); void PrintTable(DWORDLONG*,int,int); DWORDLONG ProcessByte(unsigned char*,BOOL); DWORDLONG PermuteTable(DWORDLONG,DWORDLONG*,int); void Generate_K(void); void EncryptKernel(void); DWORDLONG Generate_B(DWORDLONG,DWORDLONG*); /*For verify schele permutation only*/ DWORDLONG UnPermuteTable(DWORDLONG,DWORDLONG*,int); /**************************************/ DWORDLONG dwlData_S[9][4][16]; CShift m_shift; DWORDLONG m_dwlKey; DWORDLONG m_dwlData; DWORDLONG m_dwl_K[17]; }; void CDES::EncryptKey(char *key){ printf("\nOriginal Key: %s",key); m_dwlKey=ProcessByte((unsigned char*)key,TRUE); // PrintBit(m_dwlKey); m_dwlKey=PermuteTable(m_dwlKey,dwlKey_PC_1,56); // PrintBit(m_dwlKey); Generate_K(); // printf("\n******************************************\n"); } void CDES::Generate_K(void){ DWORDLONG C[17],D[17],tmp; C[0]=m_dwlKey>>28; D[0]=m_dwlKey&0xfffffff; for(int i=1;i<=16;i++){ tmp=(C[i-1]&m_shift.mask[i-1])>>(28-m_shift.step[i-1]); C[i]=((C[i-1]<<m_shift.step[i-1])|tmp)&0x0fffffff; tmp=(D[i-1]&m_shift.mask[i-1])>>(28-m_shift.step[i-1]); D[i]=((D[i-1]<<m_shift.step[i-1])|tmp)&0x0fffffff; m_dwl_K[i]=(C[i]<<28)|D[i]; m_dwl_K[i]=PermuteTable(m_dwl_K[i],dwlKey_PC_2,48); } } DWORDLONG CDES::ProcessByte(unsigned char *key,BOOL shift){ unsigned char tmp; DWORDLONG byte=0; int i=0; while(i<8){ while(*key){ if(byte!=0) byte<<=8; tmp=*key; if(shift) tmp<<=1; byte|=tmp; i++; key++; } if(i<8) byte<<=8; i++; } return byte; } DWORDLONG CDES::PermuteTable(DWORDLONG dwlPara,DWOR 基于des算法的rfid安全系统
DLONG* dwlTable,int nDestLen){ int i=0; DWORDLONG tmp=0,moveBit; while(i<nDestLen){ moveBit=1; if(dwlTable[i]&dwlPara){ moveBit<<=nDestLen-i-1; tmp|=moveBit; } i++; } return tmp; } DWORDLONG CDES::UnPermuteTable(DWORDLONG dwlPara,DWORDLONG* dwlTable,int nDestLen){ DWORDLONG tmp=0; int i=nDestLen-1; while(dwlPara!=0){ if(dwlPara&0x01) tmp|=dwlTable[i]; dwlPara>>=1; i--; } return tmp; } void CDES::PrintTable(DWORDLONG *dwlPara,int col,int row){ int i,j; for(i=0;i<row;i++){ printf("\n"); getch(); for(j=0;j<col;j++) PrintBit(dwlPara[i*col+j]); } } void CDES::PrintBit(DWORDLONG bitstream){ char out[76]; int i=0,j=0,space=0; while(bitstream!=0){ if(bitstream&0x01) out[i++]='1'; else out[i++]='0'; j++; if(j%8==0){ out[i++]=' '; space++; } bitstream=bitstream>>1; } out[i]='\0'; strcpy(out,strrev(out)); printf("%s **:%d\n",out,i-space); } void CDES::ConvertTableToMask(DWORDLONG *mask,int max){ int i=0; DWORDLONG nBit=1; while(mask[i]!=0){ nBit=1; nBit<<=max-mask[i]; mask[i++]=nBit; } } void CDES::Generate_S(void){ int i; int j,m,n; m=n=0; j=1; for(i=0;i<512;i++){ dwlData_S[j][m][n]=OS[i]; n=(n+1)%16; if(!n){ m=(m+1)%4; if(!m) j++; } } } unsigned char * CDES::EncryptData(unsigned char *block){ unsigned char *EncrytedData=new unsigned char(15); printf("\nOriginal Data: %s\n",block); m_dwlData=ProcessByte(block,0); // PrintBit(m_dwlData); m_dwlData=PermuteTable(m_dwlData,dwlData_IP,64); EncryptKernel(); // PrintBit(m_dwlData); DWORDLONG bit6=m_dwlData; for(int i=0;i<11;i++){ EncrytedData[7-i]=(unsigned char)(bit6&0x3f)+46; bit6>>=6; } EncrytedData[11]='\0'; printf("\nAfter Encrypted: %s",EncrytedData); for(i=0;i<8;i++){ EncrytedData[7-i]=(unsigned char)(m_dwlData&0xff); m_dwlData>>=8; } EncrytedData[8]='\0'; return EncrytedData; } void CDES::EncryptKernel(void){ int i=1; DWORDLONG L[17],R[17],B[9],EK,PSB; L[0]=m_dwlData>>32; R[0]=m_dwlData&0xffffffff; for(i=1;i<=16;i++){ L[i]=R[i-1]; R[i-1]=PermuteTable(R[i-1],dwlData_Expansion,48); //Expansion R EK=R[i-1]^m_dwl_K[i]; //E Permutation PSB=Generate_B(EK,B); //P Permutation R[i]=L[i-1]^PSB; } R[16]<<=32; m_dwlData=R[16]|L[16]; m_dwlData=PermuteTable(m_dwlData,dwlData_FP,64); } unsigned char* CDES::DescryptData(unsigned char *desData){ int i=1; unsigned char *DescryptedData=new unsigned char(15); DWORDLONG L[17],R[17],B[9],EK,PSB; DWORDLONG dataPara; dataPara=ProcessByte(desData,0); dataPara=PermuteTable(dataPara,dwlData_IP,64); R[16]=dataPara>>32; L[16]=dataPara&0xffffffff; for(i=16;i>=1;i--){ R[i-1]=L[i]; L[i]=PermuteTable(L[i],dwlData_Expansion,48); //Expansion L EK=L[i]^m_dwl_K[i]; //E Permutation PSB=Generate_B(EK,B); //P Permutation L[i-1]=R[i]^PSB; } L[0]<<=32; dataPara=L[0]|R[0]; dataPara=PermuteTable(dataPara,dwlData_FP,64); // PrintBit(dataPara); for(i=0;i<8;i++){ DescryptedData[7-i]=(unsigned char)(dataPara&0xff); dataPara>>=8; } DescryptedData[8]='\0'; printf("\nAfter Decrypted: %s\n",DescryptedData); return DescryptedData; } DWORDLONG CDES::Generate_B(DWORDLONG EKPara,DWORDLONG *block){ int i,m,n; DWORDLONG tmp=0; for(i=8;i>0;i--){ block[i]=EKPara&0x3f; m=(int)(block[i]&0x20)>>4; m|=block[i]&0x01; n=(int)(block[i]<<1)>>2; block[i]=dwlData_S[i][m][n]; EKPara>>=6; } for(i=1;i<=8;i++){ tmp|=block[i]; tmp<<=4; } tmp>>=4; tmp=PermuteTable(tmp,dwlData_P,32); return tmp; } void main(void){ CDES des; des.EncryptKey("12345678"); unsigned char *result=des.EncryptData((unsigned char*)"DemoData"); des.DescryptData(result); }[1]
‘陆’ des加密算法(c/c++)
des.h文件：
#ifndefCRYPTOPP_DES_H
#defineCRYPTOPP_DES_H
#include"cryptlib.h"
#include"misc.h"
NAMESPACE_BEGIN(CryptoPP)
classDES:publicBlockTransformation
{
public:
DES(constbyte*userKey,CipherDir);
voidProcessBlock(constbyte*inBlock,byte*outBlock)const;
voidProcessBlock(byte*inoutBlock)const
{DES::ProcessBlock(inoutBlock,inoutBlock);}
enum{KEYLENGTH=8,BLOCKSIZE=8};
unsignedintBlockSize()const{returnBLOCKSIZE;}
protected:
staticconstword32Spbox[8][64];
SecBlock<word32>k;
};
classDESEncryption:publicDES
{
public:
DESEncryption(constbyte*userKey)
:DES(userKey,ENCRYPTION){}
};
classDESDecryption:publicDES
{
public:
DESDecryption(constbyte*userKey)
:DES(userKey,DECRYPTION){}
};
classDES_EDE_Encryption:publicBlockTransformation
{
public:
DES_EDE_Encryption(constbyte*userKey)
:e(userKey,ENCRYPTION),d(userKey+DES::KEYLENGTH,DECRYPTION){}
voidProcessBlock(constbyte*inBlock,byte*outBlock)const;
voidProcessBlock(byte*inoutBlock)const;
enum{KEYLENGTH=16,BLOCKSIZE=8};
unsignedintBlockSize()const{returnBLOCKSIZE;}
private:
DESe,d;
};
classDES_EDE_Decryption:publicBlockTransformation
{
public:
DES_EDE_Decryption(constbyte*userKey)
:d(userKey,DECRYPTION),e(userKey+DES::KEYLENGTH,ENCRYPTION){}
voidProcessBlock(constbyte*inBlock,byte*outBlock)const;
voidProcessBlock(byte*inoutBlock)const;
enum{KEYLENGTH=16,BLOCKSIZE=8};
unsignedintBlockSize()const{returnBLOCKSIZE;}
private:
DESd,e;
};
classTripleDES_Encryption:publicBlockTransformation
{
public:
TripleDES_Encryption(constbyte*userKey)
:e1(userKey,ENCRYPTION),d(userKey+DES::KEYLENGTH,DECRYPTION),
e2(userKey+2*DES::KEYLENGTH,ENCRYPTION){}
voidProcessBlock(constbyte*inBlock,byte*outBlock)const;
voidProcessBlock(byte*inoutBlock)const;
enum{KEYLENGTH=24,BLOCKSIZE=8};
unsignedintBlockSize()const{returnBLOCKSIZE;}
private:
DESe1,d,e2;
};
classTripleDES_Decryption:publicBlockTransformation
{
public:
TripleDES_Decryption(constbyte*userKey)
:d1(userKey+2*DES::KEYLENGTH,DECRYPTION),e(userKey+DES::KEYLENGTH,ENCRYPTION),
d2(userKey,DECRYPTION){}
voidProcessBlock(constbyte*inBlock,byte*outBlock)const;
voidProcessBlock(byte*inoutBlock)const;
enum{KEYLENGTH=24,BLOCKSIZE=8};
unsignedintBlockSize()const{returnBLOCKSIZE;}
private:
DESd1,e,d2;
};
NAMESPACE_END
#endif
des.cpp文件：
//des.cpp-modifiedbyWeiDaifrom:
/*
*
*circa1987,'s1977
*publicdomaincode.,but
*theactualencrypt/
*Outerbridge'sDEScodeasprintedinSchneier's"AppliedCryptography."
*
*Thiscodeisinthepublicdomain.Iwouldappreciatebugreportsand
*enhancements.
*
*PhilKarnKA9Q,[email protected],August1994.
*/
#include"pch.h"
#include"misc.h"
#include"des.h"
NAMESPACE_BEGIN(CryptoPP)
/*
*Threeofthesetables,theinitialpermutation,thefinal
*,areregularenoughthat
*forspeed,wehard-codethem.They'rehereforreferenceonly.
*Also,,gensp.c,
*tobuildthecombinedSPbox,Spbox[].They'realsoherejust
*forreference.
*/
#ifdefnotdef
/*initialpermutationIP*/
staticbyteip[]={
58,50,42,34,26,18,10,2,
60,52,44,36,28,20,12,4,
62,54,46,38,30,22,14,6,
64,56,48,40,32,24,16,8,
57,49,41,33,25,17,9,1,
59,51,43,35,27,19,11,3,
61,53,45,37,29,21,13,5,
63,55,47,39,31,23,15,7
};
/*finalpermutationIP^-1*/
staticbytefp[]={
40,8,48,16,56,24,64,32,
39,7,47,15,55,23,63,31,
38,6,46,14,54,22,62,30,
37,5,45,13,53,21,61,29,
36,4,44,12,52,20,60,28,
35,3,43,11,51,19,59,27,
34,2,42,10,50,18,58,26,
33,1,41,9,49,17,57,25
};
/*expansionoperationmatrix*/
staticbyteei[]={
32,1,2,3,4,5,
4,5,6,7,8,9,
8,9,10,11,12,13,
12,13,14,15,16,17,
16,17,18,19,20,21,
20,21,22,23,24,25,
24,25,26,27,28,29,
28,29,30,31,32,1
};
/*The(in)famousS-boxes*/
staticbytesbox[8][64]={
/*S1*/
14,4,13,1,2,15,11,8,3,10,6,12,5,9,0,7,
0,15,7,4,14,2,13,1,10,6,12,11,9,5,3,8,
4,1,14,8,13,6,2,11,15,12,9,7,3,10,5,0,
15,12,8,2,4,9,1,7,5,11,3,14,10,0,6,13,
/*S2*/
15,1,8,14,6,11,3,4,9,7,2,13,12,0,5,10,
3,13,4,7,15,2,8,14,12,0,1,10,6,9,11,5,
0,14,7,11,10,4,13,1,5,8,12,6,9,3,2,15,
13,8,10,1,3,15,4,2,11,6,7,12,0,5,14,9,
/*S3*/
10,0,9,14,6,3,15,5,1,13,12,7,11,4,2,8,
13,7,0,9,3,4,6,10,2,8,5,14,12,11,15,1,
13,6,4,9,8,15,3,0,11,1,2,12,5,10,14,7,
1,10,13,0,6,9,8,7,4,15,14,3,11,5,2,12,
/*S4*/
7,13,14,3,0,6,9,10,1,2,8,5,11,12,4,15,
13,8,11,5,6,15,0,3,4,7,2,12,1,10,14,9,
10,6,9,0,12,11,7,13,15,1,3,14,5,2,8,4,
3,15,0,6,10,1,13,8,9,4,5,11,12,7,2,14,
/*S5*/
2,12,4,1,7,10,11,6,8,5,3,15,13,0,14,9,
14,11,2,12,4,7,13,1,5,0,15,10,3,9,8,6,
4,2,1,11,10,13,7,8,15,9,12,5,6,3,0,14,
11,8,12,7,1,14,2,13,6,15,0,9,10,4,5,3,
/*S6*/
12,1,10,15,9,2,6,8,0,13,3,4,14,7,5,11,
10,15,4,2,7,12,9,5,6,1,13,14,0,11,3,8,
9,14,15,5,2,8,12,3,7,0,4,10,1,13,11,6,
4,3,2,12,9,5,15,10,11,14,1,7,6,0,8,13,
/*S7*/
4,11,2,14,15,0,8,13,3,12,9,7,5,10,6,1,
13,0,11,7,4,9,1,10,14,3,5,12,2,15,8,6,
1,4,11,13,12,3,7,14,10,15,6,8,0,5,9,2,
6,11,13,8,1,4,10,7,9,5,0,15,14,2,3,12,
/*S8*/
13,2,8,4,6,15,11,1,10,9,3,14,5,0,12,7,
1,15,13,8,10,3,7,4,12,5,6,11,0,14,9,2,
7,11,4,1,9,12,14,2,0,6,10,13,15,3,5,8,
2,1,14,7,4,10,8,13,15,12,9,0,3,5,6,11
};
/*32--boxes*/
staticbytep32i[]={
16,7,20,21,
29,12,28,17,
1,15,23,26,
5,18,31,10,
2,8,24,14,
32,27,3,9,
19,13,30,6,
22,11,4,25
};
#endif
/*permutedchoicetable(key)*/
staticconstbytepc1[]={
57,49,41,33,25,17,9,
1,58,50,42,34,26,18,
10,2,59,51,43,35,27,
19,11,3,60,52,44,36,
63,55,47,39,31,23,15,
7,62,54,46,38,30,22,
14,6,61,53,45,37,29,
21,13,5,28,20,12,4
};
/*numberleftrotationsofpc1*/
staticconstbytetotrot[]={
1,2,4,6,8,10,12,14,15,17,19,21,23,25,27,28
};
/*permutedchoicekey(table)*/
staticconstbytepc2[]={
14,17,11,24,1,5,
3,28,15,6,21,10,
23,19,12,4,26,8,
16,7,27,20,13,2,
41,52,31,37,47,55,
30,40,51,45,33,48,
44,49,39,56,34,53,
46,42,50,36,29,32
};
/*EndofDES-definedtables*/
/*bit0isleft-mostinbyte*/
staticconstintbytebit[]={
0200,0100,040,020,010,04,02,01
};
/*Setkey(initializekeyschelearray)*/
DES::DES(constbyte*key,CipherDirdir)
:k(32)
{
SecByteBlockbuffer(56+56+8);
byte*constpc1m=buffer;/*placetomodifypc1into*/
byte*constpcr=pc1m+56;/*placetorotatepc1into*/
byte*constks=pcr+56;
registerinti,j,l;
intm;
for(j=0;j<56;j++){/*convertpc1tobitsofkey*/
l=pc1[j]-1;/*integerbitlocation*/
m=l&07;/*findbit*/
pc1m[j]=(key[l>>3]&/*findwhichkeybytelisin*/
bytebit[m])/*andwhichbitofthatbyte*/
?1:0;/*andstore1-bitresult*/
}
for(i=0;i<16;i++){/*keychunkforeachiteration*/
memset(ks,0,8);/*Clearkeyschele*/
for(j=0;j<56;j++)/*rotatepc1therightamount*/
pcr[j]=pc1m[(l=j+totrot[i])<(j<28?28:56)?l:l-28];
/**/
for(j=0;j<48;j++){/*selectbitsindivially*/
/*checkbitthatgoestoks[j]*/
if(pcr[pc2[j]-1]){
/*maskitinifit'sthere*/
l=j%6;
ks[j/6]|=bytebit[l]>>2;
}
}
/*Nowconverttoodd/eveninterleavedformforuseinF*/
k[2*i]=((word32)ks[0]<<24)
|((word32)ks[2]<<16)
|((word32)ks[4]<<8)
|((word32)ks[6]);
k[2*i+1]=((word32)ks[1]<<24)
|((word32)ks[3]<<16)
|((word32)ks[5]<<8)
|((word32)ks[7]);
}
if(dir==DECRYPTION)//reversekeyscheleorder
for(i=0;i<16;i+=2)
{
std::swap(k[i],k[32-2-i]);
std::swap(k[i+1],k[32-1-i]);
}
}
/**/
/*Ccodeonlyinportableversion*/
//RichardOuterbridge'sinitialpermutationalgorithm
/*
inlinevoidIPERM(word32&left,word32&right)
{
word32work;
work=((left>>4)^right)&0x0f0f0f0f;
right^=work;
left^=work<<4;
work=((left>>16)^right)&0xffff;
right^=work;
left^=work<<16;
work=((right>>2)^left)&0x33333333;
left^=work;
right^=(work<<2);
work=((right>>8)^left)&0xff00ff;
left^=work;
right^=(work<<8);
right=rotl(right,1);
work=(left^right)&0xaaaaaaaa;
left^=work;
right^=work;
left=rotl(left,1);
}
inlinevoidFPERM(word32&left,word32&right)
{
word32work;
right=rotr(right,1);
work=(left^right)&0xaaaaaaaa;
left^=work;
right^=work;
left=rotr(left,1);
work=((left>>8)^right)&0xff00ff;
right^=work;
left^=work<<8;
work=((left>>2)^right)&0x33333333;
right^=work;
left^=work<<2;
work=((right>>16)^left)&0xffff;
left^=work;
right^=work<<16;
work=((right>>4)^left)&0x0f0f0f0f;
left^=work;
right^=work<<4;
}
*/
//WeiDai''sinitialpermutation
//algorithm,
//(likeinMSVC)
inlinevoidIPERM(word32&left,word32&right)
{
word32work;
right=rotl(right,4U);
work=(left^right)&0xf0f0f0f0;
left^=work;
right=rotr(right^work,20U);
work=(left^right)&0xffff0000;
left^=work;
right=rotr(right^work,18U);
work=(left^right)&0x33333333;
left^=work;
right=rotr(right^work,6U);
work=(left^right)&0x00ff00ff;
left^=work;
right=rotl(right^work,9U);
work=(left^right)&0xaaaaaaaa;
left=rotl(left^work,1U);
right^=work;
}
inlinevoidFPERM(word32&left,word32&right)
{
word32work;
right=rotr(right,1U);
work=(left^right)&0xaaaaaaaa;
right^=work;
left=rotr(left^work,9U);
work=(left^right)&0x00ff00ff;
right^=work;
left=rotl(left^work,6U);
work=(left^right)&0x33333333;
right^=work;
left=rotl(left^work,18U);
work=(left^right)&0xffff0000;
right^=work;
left=rotl(left^work,20U);
work=(left^right)&0xf0f0f0f0;
right^=work;
left=rotr(left^work,4U);
}
//
voidDES::ProcessBlock(constbyte*inBlock,byte*outBlock)const
{
word32l,r,work;
#ifdefIS_LITTLE_ENDIAN
l=byteReverse(*(word32*)inBlock);
r=byteReverse(*(word32*)(inBlock+4));
#else
l=*(word32*)inBlock;
r=*(word32*)(inBlock+4);
#endif
IPERM(l,r);
constword32*kptr=k;
for(unsignedi=0;i<8;i++)
{
work=rotr(r,4U)^kptr[4*i+0];
l^=Spbox[6][(work)&0x3f]
^Spbox[4][(work>>8)&0x3f]
^Spbox[2][(work>>16)&0x3f]
^Spbox[0][(work>>24)&0x3f];
work=r^kptr[4*i+1];
l^=Spbox[7][(work)&0x3f]
^Spbox[5][(work>>8)&0x3f]
^Spbox[3][(work>>16)&0x3f]
^Spbox[1][(work>>24)&0x3f];
work=rotr(l,4U)^kptr[4*i+2];
r^=Spbox[6][(work)&0x3f]
^Spbox[4][(work>>8)&0x3f]
^Spbox[2][(work>>16)&0x3f]
^Spbox[0][(work>>24)&0x3f];
work=l^kptr[4*i+3];
r^=Spbox[7][(work)&0x3f]
^Spbox[5][(work>>8)&0x3f]
^Spbox[3][(work>>16)&0x3f]
^Spbox[1][(work>>24)&0x3f];
}
FPERM(l,r);
#ifdefIS_LITTLE_ENDIAN
*(word32*)outBlock=byteReverse(r);
*(word32*)(outBlock+4)=byteReverse(l);
#else
*(word32*)outBlock=r;
*(word32*)(outBlock+4)=l;
#endif
}
voidDES_EDE_Encryption::ProcessBlock(byte*inoutBlock)const
{
e.ProcessBlock(inoutBlock);
d.ProcessBlock(inoutBlock);
e.ProcessBlock(inoutBlock);
}
voidDES_EDE_Encryption::ProcessBlock(constbyte*inBlock,byte*outBlock)const
{
e.ProcessBlock(inBlock,outBlock);
d.ProcessBlock(outBlock);
e.ProcessBlock(outBlock);
}
voidDES_EDE_Decryption::ProcessBlock(byte*inoutBlock)const
{
d.ProcessBlock(inoutBlock);
e.ProcessBlock(inoutBlock);
d.ProcessBlock(inoutBlock);
}
voidDES_EDE_Decryption::ProcessBlock(constbyte*inBlock,byte*outBlock)const
{
d.ProcessBlock(inBlock,outBlock);
e.ProcessBlock(outBlock);
d.ProcessBlock(outBlock);
}
voidTripleDES_Encryption::ProcessBlock(byte*inoutBlock)const
{
e1.ProcessBlock(inoutBlock);
d.ProcessBlock(inoutBlock);
e2.ProcessBlock(inoutBlock);
}
voidTripleDES_Encryption::ProcessBlock(constbyte*inBlock,byte*outBlock)const
{
e1.ProcessBlock(inBlock,outBlock);
d.ProcessBlock(outBlock);
e2.ProcessBlock(outBlock);
}
voidTripleDES_Decryption::ProcessBlock(byte*inoutBlock)const
{
d1.ProcessBlock(inoutBlock);
e.ProcessBlock(inoutBlock);
d2.ProcessBlock(inoutBlock);
}
voidTripleDES_Decryption::ProcessBlock(constbyte*inBlock,byte*outBlock)const
{
d1.ProcessBlock(inBlock,outBlock);
e.ProcessBlock(outBlock);
d2.ProcessBlock(outBlock);
}
NAMESPACE_END
程序运行如下：
‘柒’ 用C语言来实现DES加密算法（很急）两天内
DES虽然不难但是挺繁复的，代码如下，关键点都有英文解释，仔细看。各个函数的功能都可以从函数名看出来。
#include "pch.h"
#include "misc.h"
#include "des.h"
NAMESPACE_BEGIN(CryptoPP)
/* Tables defined in the Data Encryption Standard documents
* Three of these tables, the initial permutation, the final
* permutation and the expansion operator, are regular enough that
* for speed, we hard-code them. They're here for reference only.
* Also, the S and P boxes are used by a separate program, gensp.c,
* to build the combined SP box, Spbox[]. They're also here just
* for reference.
*/
#ifdef notdef
/* initial permutation IP */
static byte ip[] = {
58, 50, 42, 34, 26, 18, 10, 2,
60, 52, 44, 36, 28, 20, 12, 4,
62, 54, 46, 38, 30, 22, 14, 6,
64, 56, 48, 40, 32, 24, 16, 8,
57, 49, 41, 33, 25, 17, 9, 1,
59, 51, 43, 35, 27, 19, 11, 3,
61, 53, 45, 37, 29, 21, 13, 5,
63, 55, 47, 39, 31, 23, 15, 7
};
/* final permutation IP^-1 */
static byte fp[] = {
40, 8, 48, 16, 56, 24, 64, 32,
39, 7, 47, 15, 55, 23, 63, 31,
38, 6, 46, 14, 54, 22, 62, 30,
37, 5, 45, 13, 53, 21, 61, 29,
36, 4, 44, 12, 52, 20, 60, 28,
35, 3, 43, 11, 51, 19, 59, 27,
34, 2, 42, 10, 50, 18, 58, 26,
33, 1, 41, 9, 49, 17, 57, 25
};
/* expansion operation matrix */
static byte ei[] = {
32, 1, 2, 3, 4, 5,
4, 5, 6, 7, 8, 9,
8, 9, 10, 11, 12, 13,
12, 13, 14, 15, 16, 17,
16, 17, 18, 19, 20, 21,
20, 21, 22, 23, 24, 25,
24, 25, 26, 27, 28, 29,
28, 29, 30, 31, 32, 1
};
/* The (in)famous S-boxes */
static byte sbox[8][64] = {
/* S1 */
14, 4, 13, 1, 2, 15, 11, 8, 3, 10, 6, 12, 5, 9, 0, 7,
0, 15, 7, 4, 14, 2, 13, 1, 10, 6, 12, 11, 9, 5, 3, 8,
4, 1, 14, 8, 13, 6, 2, 11, 15, 12, 9, 7, 3, 10, 5, 0,
15, 12, 8, 2, 4, 9, 1, 7, 5, 11, 3, 14, 10, 0, 6, 13,
/* S2 */
15, 1, 8, 14, 6, 11, 3, 4, 9, 7, 2, 13, 12, 0, 5, 10,
3, 13, 4, 7, 15, 2, 8, 14, 12, 0, 1, 10, 6, 9, 11, 5,
0, 14, 7, 11, 10, 4, 13, 1, 5, 8, 12, 6, 9, 3, 2, 15,
13, 8, 10, 1, 3, 15, 4, 2, 11, 6, 7, 12, 0, 5, 14, 9,
/* S3 */
10, 0, 9, 14, 6, 3, 15, 5, 1, 13, 12, 7, 11, 4, 2, 8,
13, 7, 0, 9, 3, 4, 6, 10, 2, 8, 5, 14, 12, 11, 15, 1,
13, 6, 4, 9, 8, 15, 3, 0, 11, 1, 2, 12, 5, 10, 14, 7,
1, 10, 13, 0, 6, 9, 8, 7, 4, 15, 14, 3, 11, 5, 2, 12,
/* S4 */
7, 13, 14, 3, 0, 6, 9, 10, 1, 2, 8, 5, 11, 12, 4, 15,
13, 8, 11, 5, 6, 15, 0, 3, 4, 7, 2, 12, 1, 10, 14, 9,
10, 6, 9, 0, 12, 11, 7, 13, 15, 1, 3, 14, 5, 2, 8, 4,
3, 15, 0, 6, 10, 1, 13, 8, 9, 4, 5, 11, 12, 7, 2, 14,
/* S5 */
2, 12, 4, 1, 7, 10, 11, 6, 8, 5, 3, 15, 13, 0, 14, 9,
14, 11, 2, 12, 4, 7, 13, 1, 5, 0, 15, 10, 3, 9, 8, 6,
4, 2, 1, 11, 10, 13, 7, 8, 15, 9, 12, 5, 6, 3, 0, 14,
11, 8, 12, 7, 1, 14, 2, 13, 6, 15, 0, 9, 10, 4, 5, 3,
/* S6 */
12, 1, 10, 15, 9, 2, 6, 8, 0, 13, 3, 4, 14, 7, 5, 11,
10, 15, 4, 2, 7, 12, 9, 5, 6, 1, 13, 14, 0, 11, 3, 8,
9, 14, 15, 5, 2, 8, 12, 3, 7, 0, 4, 10, 1, 13, 11, 6,
4, 3, 2, 12, 9, 5, 15, 10, 11, 14, 1, 7, 6, 0, 8, 13,
/* S7 */
4, 11, 2, 14, 15, 0, 8, 13, 3, 12, 9, 7, 5, 10, 6, 1,
13, 0, 11, 7, 4, 9, 1, 10, 14, 3, 5, 12, 2, 15, 8, 6,
1, 4, 11, 13, 12, 3, 7, 14, 10, 15, 6, 8, 0, 5, 9, 2,
6, 11, 13, 8, 1, 4, 10, 7, 9, 5, 0, 15, 14, 2, 3, 12,
/* S8 */
13, 2, 8, 4, 6, 15, 11, 1, 10, 9, 3, 14, 5, 0, 12, 7,
1, 15, 13, 8, 10, 3, 7, 4, 12, 5, 6, 11, 0, 14, 9, 2,
7, 11, 4, 1, 9, 12, 14, 2, 0, 6, 10, 13, 15, 3, 5, 8,
2, 1, 14, 7, 4, 10, 8, 13, 15, 12, 9, 0, 3, 5, 6, 11
};
/* 32-bit permutation function P used on the output of the S-boxes */
static byte p32i[] = {
16, 7, 20, 21,
29, 12, 28, 17,
1, 15, 23, 26,
5, 18, 31, 10,
2, 8, 24, 14,
32, 27, 3, 9,
19, 13, 30, 6,
22, 11, 4, 25
};
#endif
/* permuted choice table (key) */
static const byte pc1[] = {
57, 49, 41, 33, 25, 17, 9,
1, 58, 50, 42, 34, 26, 18,
10, 2, 59, 51, 43, 35, 27,
19, 11, 3, 60, 52, 44, 36,
63, 55, 47, 39, 31, 23, 15,
7, 62, 54, 46, 38, 30, 22,
14, 6, 61, 53, 45, 37, 29,
21, 13, 5, 28, 20, 12, 4
};
/* number left rotations of pc1 */
static const byte totrot[] = {
1,2,4,6,8,10,12,14,15,17,19,21,23,25,27,28
};
/* permuted choice key (table) */
static const byte pc2[] = {
14, 17, 11, 24, 1, 5,
3, 28, 15, 6, 21, 10,
23, 19, 12, 4, 26, 8,
16, 7, 27, 20, 13, 2,
41, 52, 31, 37, 47, 55,
30, 40, 51, 45, 33, 48,
44, 49, 39, 56, 34, 53,
46, 42, 50, 36, 29, 32
};
/* End of DES-defined tables */
/* bit 0 is left-most in byte */
static const int bytebit[] = {
0200,0100,040,020,010,04,02,01
};
/* Set key (initialize key schele array) */
DES::DES(const byte *key, CipherDir dir)
: k(32)
{
SecByteBlock buffer(56+56+8);
byte *const pc1m=buffer; /* place to modify pc1 into */
byte *const pcr=pc1m+56; /* place to rotate pc1 into */
byte *const ks=pcr+56;
register int i,j,l;
int m;
for (j=0; j<56; j++) { /* convert pc1 to bits of key */
l=pc1[j]-1; /* integer bit location */
m = l & 07; /* find bit */
pc1m[j]=(key[l>>3] & /* find which key byte l is in */
bytebit[m]) /* and which bit of that byte */
? 1 : 0; /* and store 1-bit result */
}
for (i=0; i<16; i++) { /* key chunk for each iteration */
memset(ks,0,8); /* Clear key schele */
for (j=0; j<56; j++) /* rotate pc1 the right amount */
pcr[j] = pc1m[(l=j+totrot[i])<(j<28? 28 : 56) ? l: l-28];
/* rotate left and right halves independently */
for (j=0; j<48; j++){ /* select bits indivially */
/* check bit that goes to ks[j] */
if (pcr[pc2[j]-1]){
/* mask it in if it's there */
l= j % 6;
ks[j/6] |= bytebit[l] >> 2;
}
}
/* Now convert to odd/even interleaved form for use in F */
k[2*i] = ((word32)ks[0] << 24)
| ((word32)ks[2] << 16)
| ((word32)ks[4] << 8)
| ((word32)ks[6]);
k[2*i+1] = ((word32)ks[1] << 24)
| ((word32)ks[3] << 16)
| ((word32)ks[5] << 8)
| ((word32)ks[7]);
}
if (dir==DECRYPTION) // reverse key schele order
for (i=0; i<16; i+=2)
{
std::swap(k[i], k[32-2-i]);
std::swap(k[i+1], k[32-1-i]);
}
}
/* End of C code common to both versions */
/* C code only in portable version */
// Richard Outerbridge's initial permutation algorithm
/*
inline void IPERM(word32 &left, word32 &right)
{
word32 work;
work = ((left >> 4) ^ right) & 0x0f0f0f0f;
right ^= work;
left ^= work << 4;
work = ((left >> 16) ^ right) & 0xffff;
right ^= work;
left ^= work << 16;
work = ((right >> 2) ^ left) & 0x33333333;
left ^= work;
right ^= (work << 2);
work = ((right >> 8) ^ left) & 0xff00ff;
left ^= work;
right ^= (work << 8);
right = rotl(right, 1);
work = (left ^ right) & 0xaaaaaaaa;
left ^= work;
right ^= work;
left = rotl(left, 1);
}
inline void FPERM(word32 &left, word32 &right)
{
word32 work;
right = rotr(right, 1);
work = (left ^ right) & 0xaaaaaaaa;
left ^= work;
right ^= work;
left = rotr(left, 1);
work = ((left >> 8) ^ right) & 0xff00ff;
right ^= work;
left ^= work << 8;
work = ((left >> 2) ^ right) & 0x33333333;
right ^= work;
left ^= work << 2;
work = ((right >> 16) ^ left) & 0xffff;
left ^= work;
right ^= work << 16;
work = ((right >> 4) ^ left) & 0x0f0f0f0f;
left ^= work;
right ^= work << 4;
}
*/
// Wei Dai's modification to Richard Outerbridge's initial permutation
// algorithm, this one is faster if you have access to rotate instructions
// (like in MSVC)
inline void IPERM(word32 &left, word32 &right)
{
word32 work;
right = rotl(right, 4U);
work = (left ^ right) & 0xf0f0f0f0;
left ^= work;
right = rotr(right^work, 20U);
work = (left ^ right) & 0xffff0000;
left ^= work;
right = rotr(right^work, 18U);
work = (left ^ right) & 0x33333333;
left ^= work;
right = rotr(right^work, 6U);
work = (left ^ right) & 0x00ff00ff;
left ^= work;
right = rotl(right^work, 9U);
work = (left ^ right) & 0xaaaaaaaa;
left = rotl(left^work, 1U);
right ^= work;
}
inline void FPERM(word32 &left, word32 &right)
{
word32 work;
right = rotr(right, 1U);
work = (left ^ right) & 0xaaaaaaaa;
right ^= work;
left = rotr(left^work, 9U);
work = (left ^ right) & 0x00ff00ff;
right ^= work;
left = rotl(left^work, 6U);
work = (left ^ right) & 0x33333333;
right ^= work;
left = rotl(left^work, 18U);
work = (left ^ right) & 0xffff0000;
right ^= work;
left = rotl(left^work, 20U);
work = (left ^ right) & 0xf0f0f0f0;
right ^= work;
left = rotr(left^work, 4U);
}
// Encrypt or decrypt a block of data in ECB mode
void DES::ProcessBlock(const byte *inBlock, byte * outBlock) const
{
word32 l,r,work;
#ifdef IS_LITTLE_ENDIAN
l = byteReverse(*(word32 *)inBlock);
r = byteReverse(*(word32 *)(inBlock+4));
#else
l = *(word32 *)inBlock;
r = *(word32 *)(inBlock+4);
#endif
IPERM(l,r);
const word32 *kptr=k;
for (unsigned i=0; i<8; i++)
{
work = rotr(r, 4U) ^ kptr[4*i+0];
l ^= Spbox[6][(work) & 0x3f]
^ Spbox[4][(work >> 8) & 0x3f]
^ Spbox[2][(work >> 16) & 0x3f]
^ Spbox[0][(work >> 24) & 0x3f];
work = r ^ kptr[4*i+1];
l ^= Spbox[7][(work) & 0x3f]
^ Spbox[5][(work >> 8) & 0x3f]
^ Spbox[3][(work >> 16) & 0x3f]
^ Spbox[1][(work >> 24) & 0x3f];
work = rotr(l, 4U) ^ kptr[4*i+2];
r ^= Spbox[6][(work) & 0x3f]
^ Spbox[4][(work >> 8) & 0x3f]
^ Spbox[2][(work >> 16) & 0x3f]
^ Spbox[0][(work >> 24) & 0x3f];
work = l ^ kptr[4*i+3];
r ^= Spbox[7][(work) & 0x3f]
^ Spbox[5][(work >> 8) & 0x3f]
^ Spbox[3][(work >> 16) & 0x3f]
^ Spbox[1][(work >> 24) & 0x3f];
}
FPERM(l,r);
#ifdef IS_LITTLE_ENDIAN
*(word32 *)outBlock = byteReverse(r);
*(word32 *)(outBlock+4) = byteReverse(l);
#else
*(word32 *)outBlock = r;
*(word32 *)(outBlock+4) = l;
#endif
}
void DES_EDE_Encryption::ProcessBlock(byte *inoutBlock) const
{
e.ProcessBlock(inoutBlock);
d.ProcessBlock(inoutBlock);
e.ProcessBlock(inoutBlock);
}
void DES_EDE_Encryption::ProcessBlock(const byte *inBlock, byte *outBlock) const
{
e.ProcessBlock(inBlock, outBlock);
d.ProcessBlock(outBlock);
e.ProcessBlock(outBlock);
}
void DES_EDE_Decryption::ProcessBlock(byte *inoutBlock) const
{
d.ProcessBlock(inoutBlock);
e.ProcessBlock(inoutBlock);
d.ProcessBlock(inoutBlock);
}
void DES_EDE_Decryption::ProcessBlock(const byte *inBlock, byte *outBlock) const
{
d.ProcessBlock(inBlock, outBlock);
e.ProcessBlock(outBlock);
d.ProcessBlock(outBlock);
}
void TripleDES_Encryption::ProcessBlock(byte *inoutBlock) const
{
e1.ProcessBlock(inoutBlock);
d.ProcessBlock(inoutBlock);
e2.ProcessBlock(inoutBlock);
}
void TripleDES_Encryption::ProcessBlock(const byte *inBlock, byte *outBlock) const
{
e1.ProcessBlock(inBlock, outBlock);
d.ProcessBlock(outBlock);
e2.ProcessBlock(outBlock);
}
void TripleDES_Decryption::ProcessBlock(byte *inoutBlock) const
{
d1.ProcessBlock(inoutBlock);
e.ProcessBlock(inoutBlock);
d2.ProcessBlock(inoutBlock);
}
void TripleDES_Decryption::ProcessBlock(const byte *inBlock, byte *outBlock) const
{
d1.ProcessBlock(inBlock, outBlock);
e.ProcessBlock(outBlock);
d2.ProcessBlock(outBlock);
}
‘捌’ 求一个用C/C++实现的DES加密 解密程序
//读取缓冲区的指定位.
#define GET_BIT(p_array, bit_index) ((p_array[(bit_index) >> 3] >> (7 - ((bit_index) & 0x07))) & 0x01)
//设置缓冲区的指定位.
#define SET_BIT(p_array,bit_index,bit_val) if(1==(bit_val))\
{p_array[(bit_index)>>3]|=0x01 << (7 - ((bit_index)&0x07));}else {p_array[(bit_index)>>3]&=~(0x01<<(7 - ((bit_index)&0x07)));}
//加解密标识，这两个标识涉及到对表的读取位置,
//必须保证DES_ENCRYPT = 0 DES_DECRYPT = 1
CONST uint8 Table_IP[64] =
{
58, 50, 42, 34, 26, 18, 10, 2, 60, 52, 44, 36, 28, 20, 12, 4,
62, 54, 46, 38, 30, 22, 14, 6, 64, 56, 48, 40, 32, 24, 16, 8,
57, 49, 41, 33, 25, 17, 9, 1, 59, 51, 43, 35, 27, 19, 11, 3,
61, 53, 45, 37, 29, 21, 13, 5, 63, 55, 47, 39, 31, 23, 15, 7
};
// 末置换
CONST uint8 Table_InverseIP[64] =
{
40, 8, 48, 16, 56, 24, 64, 32, 39, 7, 47, 15, 55, 23, 63, 31,
38, 6, 46, 14, 54, 22, 62, 30, 37, 5, 45, 13, 53, 21, 61, 29,
36, 4, 44, 12, 52, 20, 60, 28, 35, 3, 43, 11, 51, 19, 59, 27,
34, 2, 42, 10, 50, 18, 58, 26, 33, 1, 41, 9, 49, 17, 57, 25
};
// 扩展置换
CONST uint8 Table_E[48] =
{
32, 1, 2, 3, 4, 5, 4, 5, 6, 7, 8, 9,
8, 9, 10, 11, 12, 13, 12, 13, 14, 15, 16, 17,
16, 17, 18, 19, 20, 21, 20, 21, 22, 23, 24, 25,
24, 25, 26, 27, 28, 29, 28, 29, 30, 31, 32, 1
};
// 密钥初始置换
CONST uint8 Table_PC1[56] = {
57, 49, 41, 33, 25, 17, 9, 1, 58, 50, 42, 34, 26, 18,
10, 2, 59, 51, 43, 35, 27, 19, 11, 3, 60, 52, 44, 36,
63, 55, 47, 39, 31, 23, 15, 7, 62, 54, 46, 38, 30, 22,
14, 6, 61, 53, 45, 37, 29, 21, 13, 5, 28, 20, 12, 4
};
// 左右移运算
CONST signed char Table_Move[2][16] =
{
//加密左移
{1, 1, 2, 2, 2, 2, 2, 2, 1, 2, 2, 2, 2, 2, 2, 1},
//解密右移
{0, -1, -2, -2, -2, -2, -2, -2, -1, -2, -2, -2, -2, -2, -2, -1}
};
// 密钥压缩置换
CONST uint8 Table_PC2[48] =
{
14, 17, 11, 24, 1, 5, 3, 28, 15, 6, 21, 10,
23, 19, 12, 4, 26, 8, 16, 7, 27, 20, 13, 2,
41, 52, 31, 37, 47, 55, 30, 40, 51, 45, 33, 48,
44, 49, 39, 56, 34, 53, 46, 42, 50, 36, 29, 32
};
// S盒
CONST uint8 Table_SBOX[8][4][16] =
{
// S1
14, 4, 13, 1, 2, 15, 11, 8, 3, 10, 6, 12, 5, 9, 0, 7,
0, 15, 7, 4, 14, 2, 13, 1, 10, 6, 12, 11, 9, 5, 3, 8,
4, 1, 14, 8, 13, 6, 2, 11, 15, 12, 9, 7, 3, 10, 5, 0,
15, 12, 8, 2, 4, 9, 1, 7, 5, 11, 3, 14, 10, 0, 6, 13,
// S2
15, 1, 8, 14, 6, 11, 3, 4, 9, 7, 2, 13, 12, 0, 5, 10,
3, 13, 4, 7, 15, 2, 8, 14, 12, 0, 1, 10, 6, 9, 11, 5,
0, 14, 7, 11, 10, 4, 13, 1, 5, 8, 12, 6, 9, 3, 2, 15,
13, 8, 10, 1, 3, 15, 4, 2, 11, 6, 7, 12, 0, 5, 14, 9,
// S3
10, 0, 9, 14, 6, 3, 15, 5, 1, 13, 12, 7, 11, 4, 2, 8,
13, 7, 0, 9, 3, 4, 6, 10, 2, 8, 5, 14, 12, 11, 15, 1,
13, 6, 4, 9, 8, 15, 3, 0, 11, 1, 2, 12, 5, 10, 14, 7,
1, 10, 13, 0, 6, 9, 8, 7, 4, 15, 14, 3, 11, 5, 2, 12,
// S4
7, 13, 14, 3, 0, 6, 9, 10, 1, 2, 8, 5, 11, 12, 4, 15,
13, 8, 11, 5, 6, 15, 0, 3, 4, 7, 2, 12, 1, 10, 14, 9,
10, 6, 9, 0, 12, 11, 7, 13, 15, 1, 3, 14, 5, 2, 8, 4,
3, 15, 0, 6, 10, 1, 13, 8, 9, 4, 5, 11, 12, 7, 2, 14,
// S5
2, 12, 4, 1, 7, 10, 11, 6, 8, 5, 3, 15, 13, 0, 14, 9,
14, 11, 2, 12, 4, 7, 13, 1, 5, 0, 15, 10, 3, 9, 8, 6,
4, 2, 1, 11, 10, 13, 7, 8, 15, 9, 12, 5, 6, 3, 0, 14,
11, 8, 12, 7, 1, 14, 2, 13, 6, 15, 0, 9, 10, 4, 5, 3,
// S6
12, 1, 10, 15, 9, 2, 6, 8, 0, 13, 3, 4, 14, 7, 5, 11,
10, 15, 4, 2, 7, 12, 9, 5, 6, 1, 13, 14, 0, 11, 3, 8,
9, 14, 15, 5, 2, 8, 12, 3, 7, 0, 4, 10, 1, 13, 11, 6,
4, 3, 2, 12, 9, 5, 15, 10, 11, 14, 1, 7, 6, 0, 8, 13,
// S7
4, 11, 2, 14, 15, 0, 8, 13, 3, 12, 9, 7, 5, 10, 6, 1,
13, 0, 11, 7, 4, 9, 1, 10, 14, 3, 5, 12, 2, 15, 8, 6,
1, 4, 11, 13, 12, 3, 7, 14, 10, 15, 6, 8, 0, 5, 9, 2,
6, 11, 13, 8, 1, 4, 10, 7, 9, 5, 0, 15, 14, 2, 3, 12,
// S8
13, 2, 8, 4, 6, 15, 11, 1, 10, 9, 3, 14, 5, 0, 12, 7,
1, 15, 13, 8, 10, 3, 7, 4, 12, 5, 6, 11, 0, 14, 9, 2,
7, 11, 4, 1, 9, 12, 14, 2, 0, 6, 10, 13, 15, 3, 5, 8,
2, 1, 14, 7, 4, 10, 8, 13, 15, 12, 9, 0, 3, 5, 6, 11
};
// P盒置换
CONST uint8 Table_P[32] =
{
16, 7, 20, 21, 29, 12, 28, 17, 1, 15, 23, 26, 5, 18, 31, 10,
2, 8, 24, 14, 32, 27, 3, 9, 19, 13, 30, 6, 22, 11, 4, 25
};
//对两块大小相同的内存区进行异或
//异或结果保存到第一块内存
//uint8 * p_buf_1 内存区1
//const uint8 * p_buf_2 内存区2
//uint8 bytes 内存区大小(单位：字节)
void Xor(uint8 * p_buf_1, uint8 * p_buf_2, uint8 bytes)
{
while(bytes > 0)
{
bytes--;
p_buf_1[bytes] ^= p_buf_2[bytes];
}
}
//将缓冲区从第bit_start位到第bit_end进行循环左移
//offset只能是1，2
//本段代码还可以优化。
void move_left(uint8 * p_input, uint8 bit_start, uint8 bit_end, uint8 offset)
{
uint8 IDATA b_val = 0;
uint8 IDATA b_tmp1 = 0;
uint8 IDATA b_tmp2 = 0;
//读取bit_start位
b_tmp1 = GET_BIT(p_input, bit_start);
b_tmp2 = GET_BIT(p_input, bit_start + 1);
//循环左移offset位
for(; bit_start <= (bit_end - offset); bit_start++)
{
b_val = GET_BIT(p_input, bit_start + offset);
SET_BIT(p_input, bit_start, b_val);
}
//将bit_start开始的offset位移到bit_end后头来
if (1 == offset)
{
SET_BIT(p_input, bit_end, b_tmp1);
}
else
{
SET_BIT(p_input, bit_end, b_tmp2);
SET_BIT(p_input, bit_end - 1, b_tmp1);
}
}
//将缓冲区从第bit_start位到第bit_end进行循环右移
//offset只能是1，2
//本段代码在性能上还可以优化。
void move_right(uint8 * p_input, uint8 bit_start, uint8 bit_end, uint8 offset)
{
uint8 IDATA b_val = 0;
uint8 IDATA b_tmp1 = 0;
uint8 IDATA b_tmp2 = 0;
//读取bit_end位
b_tmp1 = GET_BIT(p_input, bit_end);
b_tmp2 = GET_BIT(p_input, bit_end - 1);
//循环左移offset位
for(; bit_end >= (bit_start + offset); bit_end--)
{
b_val = GET_BIT(p_input, bit_end - offset);
SET_BIT(p_input, bit_end, b_val);
}
//将bit_end倒数的offset位移到bit_start来
if (1 == offset)
{
SET_BIT(p_input, bit_start, b_tmp1);
}
else
{
SET_BIT(p_input, bit_start, b_tmp2);
SET_BIT(p_input, bit_start + 1, b_tmp1);
}
}
//缓冲区移位
//offset大于0时左移
//offset小于0时右移
void move_bits(uint8 * p_input, uint8 bit_start, uint8 bit_end, char offset)
{
if(0 < offset) //左移
{
move_left(p_input, bit_start, bit_end, offset);
}
else if(0 > offset) //右移
{
move_right(p_input, bit_start, bit_end, -offset);
}
}
//通用置换函数, bits <= 64
//p_input与p_output不能指向同一个地址，否则置换会出错。
void Permutation(uint8 * p_input, uint8 * p_output, uint8 * Table, uint8 bits)
{
uint8 IDATA b_val = FALSE;
uint8 IDATA bit_index = 0;
for(bit_index = 0; bit_index < bits; bit_index++)
{
b_val = GET_BIT(p_input, Table[bit_index] - 1);
SET_BIT(p_output, bit_index, b_val);
}
}
//获取从bit_s为起始的第1, 6 位组成行
uint8 S_GetLine(uint8 * p_data_ext, uint8 bit_s)
{
return (GET_BIT(p_data_ext, bit_s + 0) << 1) + GET_BIT(p_data_ext, bit_s + 5);
}
//获取从bit_s为起始的第2,3,4,5位组成列
uint8 S_GetRow(uint8 * p_data_ext, uint8 bit_s)
{
uint8 IDATA row;
//2,3,4,5位组成列
row = GET_BIT(p_data_ext, bit_s + 1);
row <<= 1;
row += GET_BIT(p_data_ext, bit_s + 2);
row <<= 1;
row += GET_BIT(p_data_ext, bit_s + 3);
row <<= 1;
row += GET_BIT(p_data_ext, bit_s + 4);
return row;
}
///////////////////////////////////////////////////////////////
// 函 数 名 : des
// 函数功能 : DES加解密
// 处理过程 : 根据标准的DES加密算法用输入的64位密钥对64位密文进行加/解密
// 并将加/解密结果存储到p_output里
// 返 回 值 :
// 参数说明 : const char * p_data 输入, 加密时输入明文, 解密时输入密文, 64位(8字节)
// const char * p_key 输入, 密钥, 64位(8字节)
// char * p_output 输出, 加密时输出密文, 解密时输入明文, 64位(8字节)
// uint8 mode DES_ENCRYPT 加密 DES_DECRYPT 解密
///////////////////////////////////////////////////////////////
void des( unsigned char * p_data, unsigned char * p_key, unsigned char * p_output, unsigned char *InVet,DES_MODE mode)
{
uint8 IDATA loop = 0; //16轮运算的循环计数器
uint8 XDATA key_tmp[8]; //密钥运算时存储中间结果
uint8 XDATA sub_key[6]; //用于存储子密钥
uint8 * p_left;
uint8 * p_right;
uint8 XDATA p_right_ext[8]; //R[i]经过扩展置换生成的48位数据(6字节), 及最终结果的存储
uint8 XDATA p_right_s[4]; //经过S_BOX置换后的32位数据(4字节)
uint8 IDATA s_loop = 0; //S_BOX置换的循环计数器
//CBC
for(loop = 0; loop < 8; loop++) p_data[loop]^=InVet[loop];
//密钥第一次缩小换位, 得到一组56位的密钥数据
Permutation(p_key, key_tmp, Table_PC1, 56);
//明文初始化置换
Permutation(p_data, p_output, Table_IP, 64);
p_left = p_output; //L0
p_right = &p_output[4]; //R0
for(loop = 0; loop < 16; loop++)
{
//把缩进小后的把这56位分为左28位和右28位,
//对左28位和右28位分别循环左/右移, 得到一组新数据
//加解密操作时只在移位时有差异
move_bits(key_tmp, 0, 27, Table_Move[mode][loop]);
move_bits(key_tmp, 28, 55, Table_Move[mode][loop]);
//密钥第二次缩小换位，得到一组子48位的子密钥
Permutation(key_tmp, sub_key, Table_PC2, 48);
//R0扩展置换
Permutation(p_right, p_right_ext, Table_E, 48);
//将R0扩展置换后得到的48位数据(6字节)与子密钥进行异或
Xor(p_right_ext, sub_key, 6);
//S_BOX置换
for(s_loop = 0; s_loop < 4; s_loop++)
{
uint8 IDATA s_line = 0;
uint8 IDATA s_row = 0;
uint8 IDATA s_bit = s_loop * 12;
s_line = S_GetLine(p_right_ext, s_bit);
s_row = S_GetRow(p_right_ext, s_bit);
p_right_s[s_loop] = Table_SBOX[s_loop * 2][s_line][s_row];
s_bit += 6;
s_line = S_GetLine(p_right_ext, s_bit);
s_row = S_GetRow(p_right_ext, s_bit);
p_right_s[s_loop] <<= 4;
p_right_s[s_loop] += Table_SBOX[(s_loop * 2) + 1][s_line][s_row];
}
//P置换
Permutation(p_right_s, p_right_ext, Table_P, 32);
Xor(p_right_ext, p_left, 4);
memcpy(p_left, p_right, 4);
memcpy(p_right, p_right_ext, 4);
}
memcpy(&p_right_ext[4], p_left, 4);
memcpy(p_right_ext, p_right, 4);
//最后再进行一次逆置换, 得到最终加密结果
Permutation(p_right_ext, p_output, Table_InverseIP, 64);
memcpy(InVet,p_output,8);
}