未知编程符号
⑴ C语言编程时 都有什么样的错误提示
Ambiguous operators need parentheses
不明确的运算,需要用括号括起来
Ambiguous symbol 'xxx'
不明确的符号
Argument list syntax error
参数表语法错误
Array bounds missing
丢失数组界限符
Array size too large
数组尺寸太大
Bad character in parameters
参数中有不适当的字符
Bad file name format in include directive
包含命令中文件名格式不正确
Bad ifdef directive syntax
编译预处理ifdef有语法错误
Bad ifndef directive syntax
编译预处理ifndef有语法错误
Bad undef directive syntax
编译预处理undef有语法错误
Call of non-function
调用未定义的函数
Call to function with no prototype
调用函数时没有函数的说明
Cannot modify a const object
不允许修改常量对象
Case outside of switch
Case 出现在 switch 之外
Case statement missing
漏掉了 Case 语句
Case syntax error
Case 语法错误
Case outside of switch
Case 出现在 switch 之外
Case statement missing
漏掉了 Case 语句
Case syntax error
Case 语法错误
Code has no effect
代码不可能执行到
Compound statement missing }
复合语句漏掉了"}"
Conflicting type modifiers
不明确的类型说明符
Constant expression required
要求常量表达式
Constant out of range in comparison
在比较中常量超出范围
Conversion may lose significant digits
转换时会掉失有意义的数字
Conversion of near pointer not allowed
不允许转换返指针
Could not find file 'xxx'
找不到xxx文件
Declaration missing ;
说明缺少分号";"
Declaration syntax error
说明中出现语法错误
Default outside of switch
default出现在switch语句之外
Define directive needs an identifier
定义编译预处理需要标识符
Division by zero
用零作除数
Do statement must have while
do-while语句中缺少while部分
Enum syntax error
枚举类型语法错误
Enumeration constant syntax error
枚举常数语法错误
Error directive: xxx
错误的编译预处理命令
Error writing output file
写输出文件错误
Expression syntax error
表达式语法错误
Extra parameter in call
调用时出现多余错误
File name too long
文件名太长
Function call missing )
函数调用缺少右括号
Function definition out of place
函数定义位置错误
Function should return a value
函数返回一个值
Goto statement missing label
goto 语句没有标号
Hexadecimal or octal constant too large
16进制或8进制常数太大
Illegal character 'x'
非法字 x
Illegal initialization
非法的初始化
Illegal octal digit
非法的8进制数字
Illegal pointer subtraction
非法的指针相减
Illegal structure operation
非法的结构体操作
Illegal use of pointer
指针使用非法
Improper use of a typedef symbol
类型符号定义使用不恰当
In-line assembly not allowed
不允许使用行间汇编
Incompatible storage class
存储类别不相容
Incompatible type conversion
不相容的类型转换
Incorrect number format
错误的数据格式
Incorrect use of default
default使用不正确
Invalid indirection
无效的间接运算
Invalid pointer addition
指针相加无效
Irrecible expression tree
无法执行的表达式运算
Lvalur required
需要逻辑值(0或非0值)
Macro argument syntax error
宏参数语法错误
Macro expansion too long
宏的扩展以后太长
Mismatched number of parameters in definition
定义中参数个数不匹配
Misplaced break
此处不应出现break语句
Misplaced continue
此处不应出现continue语句
Misplaced decimal point
此处不应出现小数点
Misplaced elif directive
此处不应出现编译预处理elif
Misplaced else
此处不应出现else
Misplaced else directive
此处不应出现编译预处理 else
Misplaced endif directive
此处不应出现编译预处理 endif
Must be addressable
必须是可以编址的
Must take address of memory location
必须存储定位的地址
No declaration for function 'xxx'
没有函数 xxx 的说明
No stack
缺少堆栈
No type information
没有类型信息
Non-portable pointer assignment
不可移动的指针(地址常数)赋值
Non-portable pointer comparison
不可移动的指针(地址常数)比较
Non-portable pointer conversion
不可移动的指针(地址常数)转换
Not a valid expression format type
不合法的表达式格式
Not an allowed type
不允许使用的类型
Numeric constant too large
数值常数太大
Out of memory
内存不够用
Parameter 'xxx' is never used
参数 xxx 没有用到
Pointer required on left side of ->
-> 符号的左边必须是指针
Possible use of 'xxx' before definition
在定义之前就使用了 xxx(警告)
Possibly incorrect assignment
赋值可能不正确
Redefinition of 'xxx' is not identical
xxx 的两次定义不一致
Register allocation failure
寄存器寻址失败
Repeat count needs an lvalue
重复计数需要逻辑值
Size of structure or array not known
结构体或数组的大小不确定
Statement missing ;
语句后缺少";"
Structure or union syntax error
结构体或联合体语法错误
Structure size too large
结构体的尺寸太大
Subscripting missing ]
下标缺少右方括号
Superfluous &with function or array
函数或数组中有多余的"&"
Suspicious pointer conversion
可疑的指针转换
Symbol limit exceeded
符号超限
Too few parameters in call
函数调用时的实参少于函数的参数
Too many error or warning messages
错误或警告信息太多
Too much auto memory in function
函数中用到的局部存储太多
Too much global data defined in file
文件中全局数据太多
Too consecutive dots
两个连续的句点
Type mismatch in parameter xxx
参数xxx类型不匹配
Type mismatch in redeclaration of 'xxx'
xxx 重定义时的类型不匹配
Unable to create output file 'xxx'
无法建立输出文件 xxx
Unable to open include file 'xxx'
无法打开被包容的文件 xxx
Bit field too large
位字段太长
Unable to open input file 'xxx'
无法打开输入文件 xxx
Undefined label 'xxx'
没有定义的标号 xxx
Undefined structure 'xxx'
没有定义的结构 xxx
Undefined symbol 'xxx'
没有定义的符号 xxx
Unexpected end of file in comment started on line xxx
从 xxx 行开始的注解尚未结束,文件不能结束
Unexpected end of file in conditional started on line xxx
从 xxx 行开始的条件语句尚未结束,文件不能结束
Unknown assembler instruction
未知的汇编结构
Unknown option
未知的操作
Unknown preprocessor directive: 'xxx'
不认识的预处理命令 xxx
Unreachable code
无法到达的代码
Unterminated string or character constant
字符串缺少引号
User break
用户强行中断了程序
Void functions may not return a value
void 类型的函数不应有返回值
Wrong number off arguments
调用函数时参数数目错
'xxx' not an argument
xxx 不是参数
'xxx' not part of structure
xxx 不是结构体的一部分
xxx statement missing (
xxx 语句缺少左括号
xxx statement missing )
xxx 语句缺少右括号
xxx statement missing ;
xxx 语句缺少分号
'xxx' declared but never used
说明了 xxx ,但没有使用
'xxx' is assigned a value which is never used
给 xxx 赋了值,但未用过
Zero length structure
结构体的长度为零
⑵ 打开的网页顶部中央未知符号字母怎么办
查源代码,把里面的空格删掉,不是这个字符拉
⑶ c程序中sqr未知符号问题
平方有pow(double, int)函数,第一个参数是底数,第二个参数是指数,平方第二个参数就为2
⑷ 怎么打那些未知符号
qq输入法,右边有个工具按钮,点开里面的‘符号’,有各种符号
⑸ C语言编程问题:如何在未知长度的字符串后面加上‘\0’的结束 符号呢
如果完全不知道长度也没有\0结尾你时没有任何办法的。你应该努力避免进入这种情况。目前我还没有相到有哪种情况下会出现”未知长度字符串也不以\0’结尾的这种字符串情况,应该是你设计前提就有理解上的问题
⑹ 编程里&x 代表什么意思
语句单独一条语句:x++;那么它的意思是x=x+1;就是把x的值加1
⑺ 搜索文件或文件夹时可以使用什么来代替未知的字符串
用 * 号来代替未知的字符串,不限文件名称的多少,可以搜索出所有的文件。 比如想搜索mp3,就在搜索框里输入 *.mp3。想搜索图片,就在搜索框里输入 *.jpg。但是你必须确定你要搜索的文件的后缀名,这样才好搜索,不然就会搜索好多东东出来的。
(7)未知编程符号扩展阅读:
用 ? 号来代替一个或者多个字符串,可以搜索出特定名称的文件。
比如输入 ?.jpg ,搜索出的文件就是一个名字的图片,如 1.jpg、2.jpg、... ;
如果输入 ??.jpg ,搜索出来的文件就是二个名字的图片,如 01jpg、02jpg、mm.jpg等。
⑻ cad输入%%加一个数字为什么提示未知命令。
cad中像%%c, %%D, %%P等已经被定义为特殊符号的输入法, 只有在Text命令中使用, 如果将它在命令行中输入就会被认为是未知的命令。如果想输入一些比较专业的图形符号, 可以自己编写几个函数。 如果不会编程序, 可以先画出符号图形, 将它定义成Block, 以后在设计中用到这个符号时就可以用Insert 命令调用这个Block。
⑼ 汇编中未知标识符是怎么回事/
SAL BYTE PTR SS:[EBP+CEF1D5C3],1
就是说你未移动前没有这个提示?那就怪了,那东西放哪也不能通过才对呀,我用
“SAL BYTE PTR SS:[EBP+0CEF1D5C3h],1”在MASM32里通过了。
lea ecx, dword ptr [ebp-8]
add byte ptr [ecx], al
你是问这什么意思?这个句子是对的,就是把第二个局部变量的地址给ECX,在用ECX来寻址,但这样在MASM5会有一点问题,ECX的默认选择器是DS,如果在FLAT模式下就没问题 ,也就是说你这一句好像没什么实际意义。
上次说不全,改了一下。