des加密源碼
#include<iostream.h>
class SubKey{ //定義子密鑰為一個類
public:
int key[8][6];
}subkey[16]; //定義子密鑰對象數組
class DES{
int encipher_decipher; //判斷加密還是解密
int key_in[8][8]; //用戶原始輸入的64位二進制數
int key_out[8][7]; //除去每行的最後一位校驗位
int c0_d0[8][7]; //存儲經PC-1轉換後的56位數據
int c0[4][7],d0[4][7]; //分別存儲c0,d0
int text[8][8]; //64位明文
int text_ip[8][8]; //經IP轉換過後的明文
int A[4][8],B[4][8]; //A,B分別存儲經IP轉換過後明文的兩部分,便於交換
int temp[8][6]; //存儲經擴展置換後的48位二進制值
int temp1[8][6]; //存儲和子密鑰異或後的結果
int s_result[8][4]; //存儲經S變換後的32位值
int text_p[8][4]; //經P置換後的32位結果
int secret_ip[8][8]; //經逆IP轉換後的密文
public:
void Key_Putting();
void PC_1();
int function(int,int); //異或
void SubKey_Proction();
void IP_Convert();
void f();
void _IP_Convert();
void Out_secret();
};
void DES::Key_Putting() //得到密鑰中對演算法有用的56位
{
cout<<"請輸入64位的密鑰(8行8列且每行都得有奇數個1):\n";
for(int i=0;i<8;i++)
for(int j=0;j<8;j++){
cin>>key_in[i][j];
if(j!=7) key_out[i][j]=key_in[i][j];
}
}
void DES::PC_1() //PC-1置換函數
{
int pc_1[8][7]={ //PC-1
{57, 49, 41, 33, 25, 17, 9},
{1, 58, 50, 42, 34, 26, 18},
{10, 2, 59, 51, 43, 35, 27},
{19, 11, 3, 60, 52, 44, 36},
{63, 55, 47, 39, 31, 23, 15},
{7, 62, 54, 46, 38, 30, 22},
{14, 6, 61, 53, 45, 37, 29},
{21, 13, 5, 28, 20, 12, 4}
};
int i,j;
for(i=0;i<8;i++)
for(j=0;j<7;j++)
c0_d0[i][j]=key_out[ (pc_1[i][j]-1)/8 ][ (pc_1[i][j]-1)%8 ];
}
int DES::function(int a,int b) //模擬二進制數的異或運算,a和b為整型的0和1,返回值為整型的0或1
{
if(a!=b)return 1;
else return 0;
}
void DES::SubKey_Proction() //生成子密鑰
{
int move[16][2]={ //循環左移的位數
1 , 1 , 2 , 1 ,
3 , 2 , 4 , 2 ,
5 , 2 , 6 , 2 ,
7 , 2 , 8 , 2 ,
9 , 1, 10 , 2,
11 , 2, 12 , 2,
13 , 2, 14 , 2,
15 , 2, 16 , 1
};
int pc_2[8][6]={ //PC-2
14, 17 ,11 ,24 , 1 , 5,
3 ,28 ,15 , 6 ,21 ,10,
23, 19, 12, 4, 26, 8,
16, 7, 27, 20 ,13 , 2,
41, 52, 31, 37, 47, 55,
30, 40, 51, 45, 33, 48,
44, 49, 39, 56, 34, 53,
46, 42, 50, 36, 29, 32
};
for(int i=0;i<16;i++) //生成子密鑰
{
int j,k;
int a[2],b[2];
int bb[28],cc[28];
for(j=0;j<4;j++)
for(k=0;k<7;k++)
c0[j][k]=c0_d0[j][k];
for(j=4;j<8;j++)
for(k=0;k<7;k++)
d0[j-4][k]=c0_d0[j][k];
for(j=0;j<4;j++)
for(k=0;k<7;k++){
bb[7*j+k]=c0[j][k];
cc[7*j+k]=d0[j][k];
}
for(j=0;j<move[i][1];j++){
a[j]=bb[j];
b[j]=cc[j];
}
for(j=0;j<28-move[i][1];j++){
bb[j]=bb[j+1];
cc[j]=cc[j+1];
}
for(j=0;j<move[i][1];j++){
bb[27-j]=a[j];
cc[27-j]=b[j];
}
for(j=0;j<28;j++){
c0[j/7][j%7]=bb[j];
d0[j/7][j%7]=cc[j];
}
for(j=0;j<4;j++) //L123--L128是把c0,d0合並成c0_d0
for(k=0;k<7;k++)
c0_d0[j][k]=c0[j][k];
for(j=4;j<8;j++)
for(k=0;k<7;k++)
c0_d0[j][k]=d0[j-4][k];
for(j=0;j<8;j++) //對Ci,Di進行PC-2置換
for(k=0;k<6;k++)
subkey[i].key[j][k]=c0_d0[ (pc_2[j][k]-1)/7 ][ (pc_2[j][k]-1)%7 ];
}
}
void DES::IP_Convert()
{
int IP[8][8]={ //初始置換IP矩陣
58, 50, 42, 34, 26, 18, 10, 2,
60, 52, 44, 36, 28, 20, 12, 4,
62, 54, 46, 38, 30, 22, 14, 6,
64, 56, 48, 40, 32, 24, 16, 8,
57, 49, 41, 33, 25, 17, 9, 1,
59, 51, 43, 35, 27, 19, 11, 3,
61, 53, 45, 37, 29, 21, 13, 5,
63, 55, 47, 39, 31, 23, 15, 7
};
cout<<"你好,你要加密還是解密?加密請按1號鍵(輸入1),解密請按2號鍵,並確定."<<'\n';
cin>>encipher_decipher;
char * s;
if(encipher_decipher==1) s="明文";
else s="密文";
cout<<"請輸入64位"<<s<<"(二進制):\n";
int i,j;
for(i=0;i<8;i++)
for(j=0;j<8;j++)
cin>>text[i][j];
for(i=0;i<8;i++) //進行IP變換
for(j=0;j<8;j++)
text_ip[i][j]=text[ (IP[i][j]-1)/8 ][ (IP[i][j]-1)%8 ];
}
② 用c++實現DES的加密解密的源代碼
#include<iostream>
#include<fstream>
#include<bitset>
#include<string>
usingnamespacestd;
bitset<64>key;
bitset<48>subKey[16];
intIP[]={58,50,42,34,26,18,10,2,
60,52,44,36,28,20,12,4,
62,54,46,38,30,22,14,6,
64,56,48,40,32,24,16,8,
57,49,41,33,25,17,9,1,
59,51,43,35,27,19,11,3,
61,53,45,37,29,21,13,5,
63,55,47,39,31,23,15,7};
intIP_1[]={40,8,48,16,56,24,64,32,
39,7,47,15,55,23,63,31,
38,6,46,14,54,22,62,30,
37,5,45,13,53,21,61,29,
36,4,44,12,52,20,60,28,
35,3,43,11,51,19,59,27,
34,2,42,10,50,18,58,26,
33,1,41,9,49,17,57,25};
intPC_1[]={57,49,41,33,25,17,9,
1,58,50,42,34,26,18,
10,2,59,51,43,35,27,
19,11,3,60,52,44,36,
63,55,47,39,31,23,15,
7,62,54,46,38,30,22,
14,6,61,53,45,37,29,
21,13,5,28,20,12,4};
intPC_2[]={14,17,11,24,1,5,
3,28,15,6,21,10,
23,19,12,4,26,8,
16,7,27,20,13,2,
41,52,31,37,47,55,
30,40,51,45,33,48,
44,49,39,56,34,53,
46,42,50,36,29,32};
intshiftBits[]={1,1,2,2,2,2,2,2,1,2,2,2,2,2,2,1};
intE[]={32,1,2,3,4,5,
4,5,6,7,8,9,
8,9,10,11,12,13,
12,13,14,15,16,17,
16,17,18,19,20,21,
20,21,22,23,24,25,
24,25,26,27,28,29,
28,29,30,31,32,1};
intS_BOX[8][4][16]={
{
{14,4,13,1,2,15,11,8,3,10,6,12,5,9,0,7},
{0,15,7,4,14,2,13,1,10,6,12,11,9,5,3,8},
{4,1,14,8,13,6,2,11,15,12,9,7,3,10,5,0},
{15,12,8,2,4,9,1,7,5,11,3,14,10,0,6,13}
},
{
{15,1,8,14,6,11,3,4,9,7,2,13,12,0,5,10},
{3,13,4,7,15,2,8,14,12,0,1,10,6,9,11,5},
{0,14,7,11,10,4,13,1,5,8,12,6,9,3,2,15},
{13,8,10,1,3,15,4,2,11,6,7,12,0,5,14,9}
},
{
{10,0,9,14,6,3,15,5,1,13,12,7,11,4,2,8},
{13,7,0,9,3,4,6,10,2,8,5,14,12,11,15,1},
{13,6,4,9,8,15,3,0,11,1,2,12,5,10,14,7},
{1,10,13,0,6,9,8,7,4,15,14,3,11,5,2,12}
},
{
{7,13,14,3,0,6,9,10,1,2,8,5,11,12,4,15},
{13,8,11,5,6,15,0,3,4,7,2,12,1,10,14,9},
{10,6,9,0,12,11,7,13,15,1,3,14,5,2,8,4},
{3,15,0,6,10,1,13,8,9,4,5,11,12,7,2,14}
},
{
{2,12,4,1,7,10,11,6,8,5,3,15,13,0,14,9},
{14,11,2,12,4,7,13,1,5,0,15,10,3,9,8,6},
{4,2,1,11,10,13,7,8,15,9,12,5,6,3,0,14},
{11,8,12,7,1,14,2,13,6,15,0,9,10,4,5,3}
},
{
{12,1,10,15,9,2,6,8,0,13,3,4,14,7,5,11},
{10,15,4,2,7,12,9,5,6,1,13,14,0,11,3,8},
{9,14,15,5,2,8,12,3,7,0,4,10,1,13,11,6},
{4,3,2,12,9,5,15,10,11,14,1,7,6,0,8,13}
},
{
{4,11,2,14,15,0,8,13,3,12,9,7,5,10,6,1},
{13,0,11,7,4,9,1,10,14,3,5,12,2,15,8,6},
{1,4,11,13,12,3,7,14,10,15,6,8,0,5,9,2},
{6,11,13,8,1,4,10,7,9,5,0,15,14,2,3,12}
},
{
{13,2,8,4,6,15,11,1,10,9,3,14,5,0,12,7},
{1,15,13,8,10,3,7,4,12,5,6,11,0,14,9,2},
{7,11,4,1,9,12,14,2,0,6,10,13,15,3,5,8},
{2,1,14,7,4,10,8,13,15,12,9,0,3,5,6,11}
}
};
intP[]={16,7,20,21,
29,12,28,17,
1,15,23,26,
5,18,31,10,
2,8,24,14,
32,27,3,9,
19,13,30,6,
22,11,4,25};
bitset<32>f(bitset<32>R,bitset<48>k)
{
bitset<48>expandR;
//第一步：擴展置換，32->48
for(inti=0;i<48;++i)
expandR[47-i]=R[32-E[i]];
//第二步：異或
expandR=expandR^k;
//第三步：查找S_BOX置換表
bitset<32>output;
intx=0;
for(inti=0;i<48;i=i+6)
{
introw=expandR[47-i]*2+expandR[47-i-5];
intcol=expandR[47-i-1]*8+expandR[47-i-2]*4+expandR[47-i-3]*2+expandR[47-i-4];
intnum=S_BOX[i/6][row][col];
bitset<4>binary(num);
output[31-x]=binary[3];
output[31-x-1]=binary[2];
output[31-x-2]=binary[1];
output[31-x-3]=binary[0];
x+=4;
}
//第四步：P-置換，32->32
bitset<32>tmp=output;
for(inti=0;i<32;++i)
output[31-i]=tmp[32-P[i]];
returnoutput;
}
bitset<28>leftShift(bitset<28>k,intshift)
{
bitset<28>tmp=k;
for(inti=27;i>=0;--i)
{
if(i-shift<0)
k[i]=tmp[i-shift+28];
else
k[i]=tmp[i-shift];
}
returnk;
}
voidgenerateKeys()
{
bitset<56>realKey;
bitset<28>left;
bitset<28>right;
bitset<48>compressKey;
//去掉奇偶標記位，將64位密鑰變成56位
for(inti=0;i<56;++i)
realKey[55-i]=key[64-PC_1[i]];
//生成子密鑰，保存在subKeys[16]中
for(intround=0;round<16;++round)
{
//前28位與後28位
for(inti=28;i<56;++i)
left[i-28]=realKey[i];
for(inti=0;i<28;++i)
right[i]=realKey[i];
//左移
left=leftShift(left,shiftBits[round]);
right=leftShift(right,shiftBits[round]);
//壓縮置換，由56位得到48位子密鑰
for(inti=28;i<56;++i)
realKey[i]=left[i-28];
for(inti=0;i<28;++i)
realKey[i]=right[i];
for(inti=0;i<48;++i)
compressKey[47-i]=realKey[56-PC_2[i]];
subKey[round]=compressKey;
}
}
bitset<64>charToBitset(constchars[8])
{
bitset<64>bits;
for(inti=0;i<8;++i)
for(intj=0;j<8;++j)
bits[i*8+j]=((s[i]>>j)&1);
returnbits;
}
bitset<64>encrypt(bitset<64>&plain)
{
bitset<64>cipher;
bitset<64>currentBits;
bitset<32>left;
bitset<32>right;
bitset<32>newLeft;
//第一步：初始置換IP
for(inti=0;i<64;++i)
currentBits[63-i]=plain[64-IP[i]];
//第二步：獲取Li和Ri
for(inti=32;i<64;++i)
left[i-32]=currentBits[i];
for(inti=0;i<32;++i)
right[i]=currentBits[i];
//第三步：共16輪迭代
for(intround=0;round<16;++round)
{
newLeft=right;
right=left^f(right,subKey[round]);
left=newLeft;
}
//第四步：合並L16和R16，注意合並為R16L16
for(inti=0;i<32;++i)
cipher[i]=left[i];
for(inti=32;i<64;++i)
cipher[i]=right[i-32];
//第五步：結尾置換IP-1
currentBits=cipher;
for(inti=0;i<64;++i)
cipher[63-i]=currentBits[64-IP_1[i]];
//返回密文
returncipher;
}
bitset<64>decrypt(bitset<64>&cipher)
{
bitset<64>plain;
bitset<64>currentBits;
bitset<32>left;
bitset<32>right;
bitset<32>newLeft;
//第一步：初始置換IP
for(inti=0;i<64;++i)
currentBits[63-i]=cipher[64-IP[i]];
//第二步：獲取Li和Ri
for(inti=32;i<64;++i)
left[i-32]=currentBits[i];
for(inti=0;i<32;++i)
right[i]=currentBits[i];
//第三步：共16輪迭代（子密鑰逆序應用）
for(intround=0;round<16;++round)
{
newLeft=right;
right=left^f(right,subKey[15-round]);
left=newLeft;
}
//第四步：合並L16和R16，注意合並為R16L16
for(inti=0;i<32;++i)
plain[i]=left[i];
for(inti=32;i<64;++i)
plain[i]=right[i-32];
//第五步：結尾置換IP-1
currentBits=plain;
for(inti=0;i<64;++i)
plain[63-i]=currentBits[64-IP_1[i]];
//返回明文
returnplain;
}
intmain(){
strings="romantic";
stringk="12345678";
bitset<64>plain=charToBitset(s.c_str());
key=charToBitset(k.c_str());
//生成16個子密鑰
generateKeys();
bitset<64>cipher=encrypt(plain);
fstreamfile1;
file1.open("D://a.txt",ios::binary|ios::out);
file1.write((char*)&cipher,sizeof(cipher));
file1.close();
bitset<64>temp;
file1.open("D://a.txt",ios::binary|ios::in);
file1.read((char*)&temp,sizeof(temp));
file1.close();
bitset<64>temp_plain=decrypt(temp);
file1.open("D://b.txt",ios::binary|ios::out);
file1.write((char*)&temp_plain,sizeof(temp_plain));
file1.close();
return0;
}
③ DES加密演算法C語言實現
/*********************************************************************/
/*-文件名：des.h */
/*- */
/*-功能： 實現DES加密演算法的加密解密功能 */
/*********************************************************************/
typedef int INT32;
typedef char INT8;
typedef unsigned char ULONG8;
typedef unsigned short ULONG16;
typedef unsigned long ULONG32;
/*如果採用c++編譯器的話採用如下宏定義
#define DllExport extern "C" __declspec(dllexport)
*/
#define DllExport __declspec(dllexport)
/*加密介面函數*/
DllExport INT32 DdesN(ULONG8 *data, ULONG8 **key, ULONG32 n_key,ULONG32 readlen);
DllExport INT32 desN(ULONG8 *data, ULONG8 **key, ULONG32 n_key,ULONG32 readlen);
DllExport INT32 des3(ULONG8 *data, ULONG8 *key,ULONG32 n ,ULONG32 readlen);
DllExport INT32 Ddes3(ULONG8 *data,ULONG8 *key,ULONG32 n ,ULONG32 readlen);
DllExport INT32 des(ULONG8 *data, ULONG8 *key,INT32 readlen);
DllExport INT32 Ddes(ULONG8 *data,ULONG8 *key,INT32 readlen);
*********************************************************************/
/*-文件名：des.c */
/*- */
/*-功能： 實現DES加密演算法的加密解密功能 */
//*********************************************************************/
＃include <stdlib.h>
＃include <stdio.h>
＃include <string.h>
＃include <memory.h>
＃include <malloc.h>
＃include "des.h"
#define SUCCESS 0
#define FAIL -1
#define READFILESIZE 512
#define WZ_COMMEND_NUM 4
#define WZUSEHELPNUM 19
#define DESONE 1
#define DESTHREE 2
#define DESMULTI 3
INT8 *WZ_Commend_Help[] =
{
"基於DES的加密解密工具v1.0 ",/*0*/
"追求卓越,勇於創新 ",
"----著者 : 吳真--- ",
" "
};
INT8 *WZ_USE_HELP[]={
"輸入5+n個參數:",
"\t1.可執行文件名 *.exe",
"\t2.操作類型 1:一層加密;2:一層解密;",
"\t\t13:N層單密鑰加密;23:N層單密鑰解密;",
"\t\t39:N層多密鑰加密;49:N層多密鑰解密",
"\t3.讀出數據的文件名*.txt",
"\t4.寫入數據的文件名*.txt",
"\t5.密鑰(8位元組例如:wuzhen12)",
"\t[6].N層單密鑰的層數或者...二層加密|解密密鑰",
"\t[7].三層加密|解密密鑰",
"\t[8]. ...",
"\t[N].N層加密|解密密鑰",
"\t 例1: des 1 1.txt 2.txt 12345678",
"\t : des 2 2.txt 3.txt 12345678",
"\t 例2: des 13 1.txt 2.txt tiantian 5",
"\t : des 23 2.txt 3.txt tiantian 5",
"\t 例3: des 39 1.txt 2.txt 12345678 tiantian gaoxinma",
"\t : des 49 2.txt 3.txt 12345678 tiantian gaoxinma",
"******************************"
};
INT32 hextofile( ULONG8 *buf ,FILE *writefile, ULONG32 length);/*以16進制寫入文件*/
INT32 encodehex(ULONG8 *tobuf,ULONG8 *frombuf,ULONG32 len);/*16進制解碼*/
INT32 file_enc(FILE *readfile,FILE *writefile,
ULONG8 *key,ULONG32 keynum,
ULONG8 **superkey,ULONG32 n_superkey,
ULONG8 flag);
INT32 file_dec(FILE *readfile,FILE *writefile,
ULONG8 *key,ULONG32 keynum,
ULONG8 **superkey,ULONG32 n_superkey,
ULONG8 flag);
void wz_print_help();
INT32 main(INT32 argc,INT8 *argv[])
{
INT8 *FILENAME1,*FILENAME2;
FILE *fp, *fp2;
ULONG8 *key ;
ULONG8 **superkey ;/*n層加密解密密鑰*/
ULONG8 n_superkey ;
ULONG32 num;
if ( argc >= 5 && (atoi(argv[1]) == 39 || atoi(argv[1]) == 49 ) )
{
n_superkey = argc - 4 ;
superkey = ( INT8 **)calloc(1, n_superkey*sizeof( void *) ) ;
for ( num = 0 ; num < n_superkey ; num++)
{
superkey[num] = argv[4+num] ;
}
}
else if ( argc == 6 && (atoi(argv[1]) == 13 || atoi(argv[1]) == 23 ) && (atoi(argv[5])) > 0)
{
}
else if ( argc == 5 && ( atoi(argv[1]) == 1 || atoi(argv[1]) == 2 ))
{
}
else
{
wz_print_help();
return FAIL;
}
FILENAME1 = argv[2];
FILENAME2 = argv[3];
if ((fp= fopen(FILENAME1,"rb")) == NULL || (fp2 = fopen(FILENAME2,"wb"))==NULL)
{
printf("Can't open file\n");
return FAIL;
}
key = argv[4] ;
switch( atoi(argv[1] ))
{
case 1: /*加密*/
file_enc(fp,fp2,key,0, NULL,0, DESONE);
printf("\n \tDES 一層加密完畢,密文存於%s文件\n",FILENAME2);
break;
case 2:
file_dec(fp,fp2,key,0, NULL, 0,DESONE);
printf("\n \tDES 一層解密完畢,密文存於%s文件\n",FILENAME2);
break;
case 13:
file_enc(fp,fp2,key,atoi(argv[5]),NULL,0,DESTHREE);
printf("\n \tDES %u層單密鑰加密完畢,密文存於%s文件\n",atoi(argv[5]),FILENAME2);
break;
case 23:
file_dec(fp,fp2,key,atoi(argv[5]),NULL,0,DESTHREE);
printf("\n \tDES %u層單密鑰解密完畢,密文存於%s文件\n",atoi(argv[5]),FILENAME2);
break;
case 39:
file_enc(fp,fp2,NULL,0,superkey,n_superkey,DESMULTI);
printf("\n \tDES 多密鑰加密完畢,密文存於%s文件\n",FILENAME2);
free(superkey);
superkey = NULL;
break;
case 49:
file_dec(fp,fp2,NULL,0,superkey,n_superkey,DESMULTI);
printf("\n \tDES 多密鑰加密完畢,密文存於%s文件\n",FILENAME2);
free(superkey);
superkey = NULL;
break;
default:
printf("請選擇是加密|解密 plese choose encrypt|deencrypt\n");
break;
}
fclose(fp);
fclose(fp2);
return SUCCESS;
}
void wz_print_help()
{
INT32 i ;
printf("\t");
for ( i = 0 ; i < 22 ; i++)
{
printf("%c ",5);
}
printf("\n");
for( i = 0 ; i < WZ_COMMEND_NUM ; i++)
{
printf("\t%c\t%s %c\n",5,WZ_Commend_Help[i],5);
}
printf("\t");
for ( i = 0 ; i < 22 ; i++)
{
printf("%c ",5);
}
printf("\n");
for( i = 0 ; i < WZUSEHELPNUM ; i++)
{
printf("\t%s\n",WZ_USE_HELP[i]);
}
return ;
}
INT32 file_enc(FILE *readfile,FILE *writefile,
ULONG8 *key,ULONG32 keynum,
ULONG8 **superkey,ULONG32 n_superkey,
ULONG8 flag)
{
INT32 filelen = 0,readlen = 0,writelen = 0;
ULONG32 totalfilelen = 0 ;/*統計實際的文件的長度*/
ULONG8 readbuf[READFILESIZE] = { 0 };
filelen = fread( readbuf, sizeof( INT8 ), READFILESIZE, readfile );
while( filelen == READFILESIZE )
{
totalfilelen += READFILESIZE;
switch(flag)
{
case DESONE:
des( readbuf,key,READFILESIZE);
break;
case DESTHREE:
des3( readbuf, key ,keynum,READFILESIZE);
break;
case DESMULTI:
desN( readbuf, superkey ,n_superkey,READFILESIZE);
break;
}
hextofile( readbuf, writefile, READFILESIZE );/*以16進制形式寫入文件*/
memset(readbuf,0,READFILESIZE);
filelen = fread( readbuf, sizeof( INT8 ), READFILESIZE, readfile );
}
/*這是從文件中讀出的最後一批數據,長度可能會等於0,所以要先判斷*/
if ( filelen > 0 )
{
/*如果從文件中讀出的長度不等於0,那麼肯定有8個位元組以上的空間
文件長度存在最後8個位元組中*/
totalfilelen += filelen;
memcpy( &readbuf[READFILESIZE-8], (ULONG8*)&totalfilelen,4);
switch(flag)
{
case DESONE:
des( readbuf,key,READFILESIZE);
break;
case DESTHREE:
des3( readbuf, key ,keynum,READFILESIZE);
break;
case DESMULTI:
desN( readbuf, superkey ,n_superkey,READFILESIZE);
break;
}
hextofile( readbuf, writefile,READFILESIZE );/*以16進制形式寫入文件*/
memset(readbuf,0 ,READFILESIZE);
}
else /*filelen == 0*/
{
memcpy( &readbuf[0], (ULONG8*)&totalfilelen,4);
switch(flag)
{
case DESONE:
des( readbuf,key,8);
break;
case DESTHREE:
des3( readbuf, key ,keynum,8);
break;
case DESMULTI:
desN( readbuf, superkey ,n_superkey,8);
break;
}
hextofile( readbuf, writefile, 8);/*以16進制形式寫入文件*/
}
return SUCCESS;
}
INT32 file_dec(FILE *readfile,FILE *writefile,
ULONG8 *key,ULONG32 keynum,
ULONG8 **superkey,ULONG32 n_superkey,
ULONG8 flag)
{
INT32 filelen = 0,readlen = 0,writelen = 0;
ULONG32 totalfilelen = 0 ;/*統計實際的文件的長度*/
INT32 num = 0;
ULONG8 readbuf[READFILESIZE] = { 0 };
ULONG8 sendbuf[READFILESIZE*2] = { 0 };
fseek(readfile,-16,SEEK_END);/*最後16個位元組的表示文件長度的空間*/
filelen = fread( sendbuf, sizeof( INT8 ), 16, readfile );
encodehex( readbuf,sendbuf,8);
switch(flag)
{
case DESONE:
Ddes( readbuf,key,8);
break;
case DESTHREE:
Ddes3( readbuf, key ,keynum,8);
break;
case DESMULTI:
DdesN( readbuf, superkey ,n_superkey,8);
break;
}
/*解密*/
memcpy((ULONG8*)&totalfilelen, &readbuf[0],4);/*得到文件總長*/
memset(readbuf,0 ,8);
memset(sendbuf,0 ,16);
num = totalfilelen/READFILESIZE;/*有幾個READFILESIZE組*/
totalfilelen %= READFILESIZE;
fseek(readfile,0,SEEK_SET);/*跳到文件頭*/
while(num--)
{
filelen = fread( sendbuf, sizeof( INT8 ), READFILESIZE*2, readfile );
encodehex( readbuf,sendbuf,READFILESIZE);
switch(flag)
{
case DESONE:
Ddes( readbuf,key,READFILESIZE);
break;
case DESTHREE:
Ddes3( readbuf, key ,keynum,READFILESIZE);
break;
case DESMULTI:
DdesN( readbuf, superkey ,n_superkey,READFILESIZE);
break;
}
writelen = fwrite(readbuf, sizeof( INT8 ), READFILESIZE, writefile);
memset(readbuf,0 ,READFILESIZE);
memset(sendbuf,0 ,READFILESIZE*2);
}
if ( totalfilelen > 0 )/*最後一塊有多餘的元素*/
{
filelen = fread( sendbuf, sizeof( INT8 ), READFILESIZE*2, readfile );
encodehex( readbuf,sendbuf,READFILESIZE);
switch(flag)
{
case DESONE:
Ddes( readbuf,key,READFILESIZE);
break;
case DESTHREE:
Ddes3( readbuf, key ,keynum,READFILESIZE);
break;
case DESMULTI:
DdesN( readbuf, superkey ,n_superkey,READFILESIZE);
break;
}
writelen = fwrite(readbuf, sizeof( INT8 ), totalfilelen, writefile);
memset(readbuf,0 ,READFILESIZE);
memset(sendbuf,0 ,READFILESIZE*2);
}
return SUCCESS;
}
INT32 hextofile( ULONG8 *buf ,FILE *writefile, ULONG32 length)
{
ULONG32 writelen = 0 ;
/*以16進制形式寫入文件*/
while( writelen < length)
{
if(buf[writelen] == 0)
{
fprintf( writefile, "%x", 0 );
fprintf( writefile, "%x", 0 );
}
else if (buf[writelen] < 0x10)
{
fprintf( writefile, "%x", 0 );
fprintf( writefile, "%x", buf[writelen] );
}
else
{
fprintf( writefile, "%x", buf[writelen] );
}
writelen++;
}
return SUCCESS;
}
INT32 encodehex(ULONG8 *tobuf,ULONG8 *frombuf,ULONG32 len)
{
ULONG8 *readfirst = frombuf ;
ULONG8 *readend = &frombuf[1] ;
INT8 *s;
ULONG8 y[2] ;
ULONG32 i;
for ( i = 0 ; i < len ; i++)
{
y[0] = *readfirst ;
y[1] = *readend ;
readfirst += 2 ;
readend += 2 ;
tobuf[i] = (ULONG8)strtol((INT8*)y, &s, 16);
}
return SUCCESS;
}
④ DES怎麼加密文件使文件大小不變,給源碼.急用
DES加密怎麼可能保證文件長度不變？按照DES演算法標准，最後肯定要有填充的過程呢，除非你自己搞一個演算法。
⑤ 十萬火急，哪兒我可以得到Des加密演算法的Pascal源碼
鏈接如下：
.3.0FWS677Kb31.08.99
ByHagenReddmann....includes:
40Ciphers(IDEA,Blowfish,Twofish,DES,Square...)
23Hashs(MD4/5,SHA/1,RipeMD,Havel,Tiger...)
5Checksums(CRC32,CRC16-CCITT,CRC16-Standard...)
6Textformats(MIMEBase64,XX/UUCoding,RFC1760SixWord...)
2Randoms(^2032-1...)
/CBC/CFB/OFB/ECB
-MAC/CFB-MAC/CTS-MAC
fastImplementation(i.e.Blowfish>8Mb/sec,MD4>27Mb/sec)InternetRFC2289/RFC1760/
Manymore...
⑥ 求C語言編寫的DES加密解密源代碼
從別的地方抄來的
http://hi..com/493168771/blog/item/5816b034ca19fc44251f144c.html
#include "stdio.h"
#include "time.h"
#include "stdlib.h"
#define PLAIN_FILE_OPEN_ERROR -1
#define KEY_FILE_OPEN_ERROR -2
#define CIPHER_FILE_OPEN_ERROR -3
#define OK 1;
typedef char ElemType;
/* 初始置換表IP */
int IP_Table[64] = { 57,49,41,33,25,17,9,1,
59,51,43,35,27,19,11,3,
61,53,45,37,29,21,13,5,
63,55,47,39,31,23,15,7,
56,48,40,32,24,16,8,0,
58,50,42,34,26,18,10,2,
60,52,44,36,28,20,12,4,
62,54,46,38,30,22,14,6};
/* 逆初始置換表IP^-1 */
int IP_1_Table[64] = {39,7,47,15,55,23,63,31,
38,6,46,14,54,22,62,30,
37,5,45,13,53,21,61,29,
36,4,44,12,52,20,60,28,
35,3,43,11,51,19,59,27,
34,2,42,10,50,18,58,26,
33,1,41,9,49,17,57,25,
32,0,40,8,48,16,56,24};
/* 擴充置換表E */
int E_Table[48] = {31, 0, 1, 2, 3, 4,
3, 4, 5, 6, 7, 8,
7, 8,9,10,11,12,
11,12,13,14,15,16,
15,16,17,18,19,20,
19,20,21,22,23,24,
23,24,25,26,27,28,
27,28,29,30,31, 0};
/* 置換函數P */
int P_Table[32] = {15,6,19,20,28,11,27,16,
0,14,22,25,4,17,30,9,
1,7,23,13,31,26,2,8,
18,12,29,5,21,10,3,24};
/* S盒 */
int S[8][4][16] =/* S1 */
{{{14,4,13,1,2,15,11,8,3,10,6,12,5,9,0,7},
{0,15,7,4,14,2,13,1,10,6,12,11,9,5,3,8},
{4,1,14,8,13,6,2,11,15,12,9,7,3,10,5,0},
{15,12,8,2,4,9,1,7,5,11,3,14,10,0,6,13}},
/* S2 */
{{15,1,8,14,6,11,3,4,9,7,2,13,12,0,5,10},
{3,13,4,7,15,2,8,14,12,0,1,10,6,9,11,5},
{0,14,7,11,10,4,13,1,5,8,12,6,9,3,2,15},
{13,8,10,1,3,15,4,2,11,6,7,12,0,5,14,9}},
/* S3 */
{{10,0,9,14,6,3,15,5,1,13,12,7,11,4,2,8},
{13,7,0,9,3,4,6,10,2,8,5,14,12,11,15,1},
{13,6,4,9,8,15,3,0,11,1,2,12,5,10,14,7},
{1,10,13,0,6,9,8,7,4,15,14,3,11,5,2,12}},
/* S4 */
{{7,13,14,3,0,6,9,10,1,2,8,5,11,12,4,15},
{13,8,11,5,6,15,0,3,4,7,2,12,1,10,14,9},
{10,6,9,0,12,11,7,13,15,1,3,14,5,2,8,4},
{3,15,0,6,10,1,13,8,9,4,5,11,12,7,2,14}},
/* S5 */
{{2,12,4,1,7,10,11,6,8,5,3,15,13,0,14,9},
{14,11,2,12,4,7,13,1,5,0,15,10,3,9,8,6},
{4,2,1,11,10,13,7,8,15,9,12,5,6,3,0,14},
{11,8,12,7,1,14,2,13,6,15,0,9,10,4,5,3}},
/* S6 */
{{12,1,10,15,9,2,6,8,0,13,3,4,14,7,5,11},
{10,15,4,2,7,12,9,5,6,1,13,14,0,11,3,8},
{9,14,15,5,2,8,12,3,7,0,4,10,1,13,11,6},
{4,3,2,12,9,5,15,10,11,14,1,7,6,0,8,13}},
/* S7 */
{{4,11,2,14,15,0,8,13,3,12,9,7,5,10,6,1},
{13,0,11,7,4,9,1,10,14,3,5,12,2,15,8,6},
{1,4,11,13,12,3,7,14,10,15,6,8,0,5,9,2},
{6,11,13,8,1,4,10,7,9,5,0,15,14,2,3,12}},
/* S8 */
{{13,2,8,4,6,15,11,1,10,9,3,14,5,0,12,7},
{1,15,13,8,10,3,7,4,12,5,6,11,0,14,9,2},
{7,11,4,1,9,12,14,2,0,6,10,13,15,3,5,8},
{2,1,14,7,4,10,8,13,15,12,9,0,3,5,6,11}}};
/* 置換選擇1 */
int PC_1[56] = {56,48,40,32,24,16,8,
0,57,49,41,33,25,17,
9,1,58,50,42,34,26,
18,10,2,59,51,43,35,
62,54,46,38,30,22,14,
6,61,53,45,37,29,21,
13,5,60,52,44,36,28,
20,12,4,27,19,11,3};
/* 置換選擇2 */
int PC_2[48] = {13,16,10,23,0,4,2,27,
14,5,20,9,22,18,11,3,
25,7,15,6,26,19,12,1,
40,51,30,36,46,54,29,39,
50,44,32,46,43,48,38,55,
33,52,45,41,49,35,28,31};
/* 對左移次數的規定 */
int MOVE_TIMES[16] = {1,1,2,2,2,2,2,2,1,2,2,2,2,2,2,1};
int ByteToBit(ElemType ch,ElemType bit[8]);
int BitToByte(ElemType bit[8],ElemType *ch);
int Char8ToBit64(ElemType ch[8],ElemType bit[64]);
int Bit64ToChar8(ElemType bit[64],ElemType ch[8]);
int DES_MakeSubKeys(ElemType key[64],ElemType subKeys[16][48]);
int DES_PC1_Transform(ElemType key[64], ElemType tempbts[56]);
int DES_PC2_Transform(ElemType key[56], ElemType tempbts[48]);
int DES_ROL(ElemType data[56], int time);
int DES_IP_Transform(ElemType data[64]);
int DES_IP_1_Transform(ElemType data[64]);
int DES_E_Transform(ElemType data[48]);
int DES_P_Transform(ElemType data[32]);
int DES_SBOX(ElemType data[48]);
int DES_XOR(ElemType R[48], ElemType L[48],int count);
int DES_Swap(ElemType left[32],ElemType right[32]);
int DES_EncryptBlock(ElemType plainBlock[8], ElemType subKeys[16][48], ElemType cipherBlock[8]);
int DES_DecryptBlock(ElemType cipherBlock[8], ElemType subKeys[16][48], ElemType plainBlock[8]);
int DES_Encrypt(char *plainFile, char *keyStr,char *cipherFile);
int DES_Decrypt(char *cipherFile, char *keyStr,char *plainFile);
/* 位元組轉換成二進制 */
int ByteToBit(ElemType ch, ElemType bit[8]){
int cnt;
for(cnt = 0;cnt < 8; cnt++){
*(bit+cnt) = (ch>>cnt)&1;
}
return 0;
}
/* 二進制轉換成位元組 */
int BitToByte(ElemType bit[8],ElemType *ch){
int cnt;
for(cnt = 0;cnt < 8; cnt++){
*ch |= *(bit + cnt)<<cnt;
}
return 0;
}
/* 將長度為8的字元串轉為二進制位串 */
int Char8ToBit64(ElemType ch[8],ElemType bit[64]){
int cnt;
for(cnt = 0; cnt < 8; cnt++){
ByteToBit(*(ch+cnt),bit+(cnt<<3));
}
return 0;
}
/* 將二進制位串轉為長度為8的字元串 */
int Bit64ToChar8(ElemType bit[64],ElemType ch[8]){
int cnt;
memset(ch,0,8);
for(cnt = 0; cnt < 8; cnt++){
BitToByte(bit+(cnt<<3),ch+cnt);
}
return 0;
}
/* 生成子密鑰 */
int DES_MakeSubKeys(ElemType key[64],ElemType subKeys[16][48]){
ElemType temp[56];
int cnt;
DES_PC1_Transform(key,temp);/* PC1置換 */
for(cnt = 0; cnt < 16; cnt++){/* 16輪跌代，產生16個子密鑰 */
DES_ROL(temp,MOVE_TIMES[cnt]);/* 循環左移 */
DES_PC2_Transform(temp,subKeys[cnt]);/* PC2置換，產生子密鑰 */
}
return 0;
}
/* 密鑰置換1 */
int DES_PC1_Transform(ElemType key[64], ElemType tempbts[56]){
int cnt;
for(cnt = 0; cnt < 56; cnt++){
tempbts[cnt] = key[PC_1[cnt]];
}
return 0;
}
/* 密鑰置換2 */
int DES_PC2_Transform(ElemType key[56], ElemType tempbts[48]){
int cnt;
for(cnt = 0; cnt < 48; cnt++){
tempbts[cnt] = key[PC_2[cnt]];
}
return 0;
}
/* 循環左移 */
int DES_ROL(ElemType data[56], int time){
ElemType temp[56];
/* 保存將要循環移動到右邊的位 */
memcpy(temp,data,time);
memcpy(temp+time,data+28,time);
/* 前28位移動 */
memcpy(data,data+time,28-time);
memcpy(data+28-time,temp,time);
/* 後28位移動 */
memcpy(data+28,data+28+time,28-time);
memcpy(data+56-time,temp+time,time);
return 0;
}
/* IP置換 */
int DES_IP_Transform(ElemType data[64]){
int cnt;
ElemType temp[64];
for(cnt = 0; cnt < 64; cnt++){
temp[cnt] = data[IP_Table[cnt]];
}
memcpy(data,temp,64);
return 0;
}
/* IP逆置換 */
int DES_IP_1_Transform(ElemType data[64]){
int cnt;
ElemType temp[64];
for(cnt = 0; cnt < 64; cnt++){
temp[cnt] = data[IP_1_Table[cnt]];
}
memcpy(data,temp,64);
return 0;
}
/* 擴展置換 */
int DES_E_Transform(ElemType data[48]){
int cnt;
ElemType temp[48];
for(cnt = 0; cnt < 48; cnt++){
temp[cnt] = data[E_Table[cnt]];
}
memcpy(data,temp,48);
return 0;
}
/* P置換 */
int DES_P_Transform(ElemType data[32]){
int cnt;
ElemType temp[32];
for(cnt = 0; cnt < 32; cnt++){
temp[cnt] = data[P_Table[cnt]];
}
memcpy(data,temp,32);
return 0;
}
/* 異或 */
int DES_XOR(ElemType R[48], ElemType L[48] ,int count){
int cnt;
for(cnt = 0; cnt < count; cnt++){
R[cnt] ^= L[cnt];
}
return 0;
}
/* S盒置換 */
int DES_SBOX(ElemType data[48]){
int cnt;
int line,row,output;
int cur1,cur2;
for(cnt = 0; cnt < 8; cnt++){
cur1 = cnt*6;
cur2 = cnt<<2;
/* 計算在S盒中的行與列 */
line = (data[cur1]<<1) + data[cur1+5];
row = (data[cur1+1]<<3) + (data[cur1+2]<<2)
+ (data[cur1+3]<<1) + data[cur1+4];
output = S[cnt][line][row];
/* 化為2進制 */
data[cur2] = (output&0X08)>>3;
data[cur2+1] = (output&0X04)>>2;
data[cur2+2] = (output&0X02)>>1;
data[cur2+3] = output&0x01;
}
return 0;
}
/* 交換 */
int DES_Swap(ElemType left[32], ElemType right[32]){
ElemType temp[32];
memcpy(temp,left,32);
memcpy(left,right,32);
memcpy(right,temp,32);
return 0;
}
/* 加密單個分組 */
int DES_EncryptBlock(ElemType plainBlock[8], ElemType subKeys[16][48], ElemType cipherBlock[8]){
ElemType plainBits[64];
ElemType Right[48];
int cnt;
Char8ToBit64(plainBlock,plainBits);
/* 初始置換（IP置換） */
DES_IP_Transform(plainBits);
/* 16輪迭代 */
for(cnt = 0; cnt < 16; cnt++){
memcpy(Right,plainBits+32,32);
/* 將右半部分進行擴展置換，從32位擴展到48位 */
DES_E_Transform(Right);
/* 將右半部分與子密鑰進行異或操作 */
DES_XOR(Right,subKeys[cnt],48);
/* 異或結果進入S盒，輸出32位結果 */
DES_SBOX(Right);
/* P置換 */
DES_P_Transform(Right);
/* 將明文左半部分與右半部分進行異或 */
DES_XOR(plainBits,Right,32);
if(cnt != 15){
/* 最終完成左右部的交換 */
DES_Swap(plainBits,plainBits+32);
}
}
/* 逆初始置換（IP^1置換） */
DES_IP_1_Transform(plainBits);
Bit64ToChar8(plainBits,cipherBlock);
return 0;
}
/* 解密單個分組 */
int DES_DecryptBlock(ElemType cipherBlock[8], ElemType subKeys[16][48],ElemType plainBlock[8]){
ElemType cipherBits[64];
ElemType Right[48];
int cnt;
Char8ToBit64(cipherBlock,cipherBits);
/* 初始置換（IP置換） */
DES_IP_Transform(cipherBits);
/* 16輪迭代 */
for(cnt = 15; cnt >= 0; cnt--){
memcpy(Right,cipherBits+32,32);
/* 將右半部分進行擴展置換，從32位擴展到48位 */
DES_E_Transform(Right);
/* 將右半部分與子密鑰進行異或操作 */
DES_XOR(Right,subKeys[cnt],48);
/* 異或結果進入S盒，輸出32位結果 */
DES_SBOX(Right);
/* P置換 */
DES_P_Transform(Right);
/* 將明文左半部分與右半部分進行異或 */
DES_XOR(cipherBits,Right,32);
if(cnt != 0){
/* 最終完成左右部的交換 */
DES_Swap(cipherBits,cipherBits+32);
}
}
/* 逆初始置換（IP^1置換） */
DES_IP_1_Transform(cipherBits);
Bit64ToChar8(cipherBits,plainBlock);
return 0;
}
/* 加密文件 */
int DES_Encrypt(char *plainFile, char *keyStr,char *cipherFile){
FILE *plain,*cipher;
int count;
ElemType plainBlock[8],cipherBlock[8],keyBlock[8];
ElemType bKey[64];
ElemType subKeys[16][48];
if((plain = fopen(plainFile,"rb")) == NULL){
return PLAIN_FILE_OPEN_ERROR;
}
if((cipher = fopen(cipherFile,"wb")) == NULL){
return CIPHER_FILE_OPEN_ERROR;
}
/* 設置密鑰 */
memcpy(keyBlock,keyStr,8);
/* 將密鑰轉換為二進制流 */
Char8ToBit64(keyBlock,bKey);
/* 生成子密鑰 */
DES_MakeSubKeys(bKey,subKeys);
while(!feof(plain)){
/* 每次讀8個位元組，並返回成功讀取的位元組數 */
if((count = fread(plainBlock,sizeof(char),8,plain)) == 8){
DES_EncryptBlock(plainBlock,subKeys,cipherBlock);
fwrite(cipherBlock,sizeof(char),8,cipher);
}
}
if(count){
/* 填充 */
memset(plainBlock + count,'\0',7 - count);
/* 最後一個字元保存包括最後一個字元在內的所填充的字元數量 */
plainBlock[7] = 8 - count;
DES_EncryptBlock(plainBlock,subKeys,cipherBlock);
fwrite(cipherBlock,sizeof(char),8,cipher);
}
fclose(plain);
fclose(cipher);
return OK;
}
/* 解密文件 */
int DES_Decrypt(char *cipherFile, char *keyStr,char *plainFile){
FILE *plain, *cipher;
int count,times = 0;
long fileLen;
ElemType plainBlock[8],cipherBlock[8],keyBlock[8];
ElemType bKey[64];
ElemType subKeys[16][48];
if((cipher = fopen(cipherFile,"rb")) == NULL){
return CIPHER_FILE_OPEN_ERROR;
}
if((plain = fopen(plainFile,"wb")) == NULL){
return PLAIN_FILE_OPEN_ERROR;
}
/* 設置密鑰 */
memcpy(keyBlock,keyStr,8);
/* 將密鑰轉換為二進制流 */
Char8ToBit64(keyBlock,bKey);
/* 生成子密鑰 */
DES_MakeSubKeys(bKey,subKeys);
/* 取文件長度 */
fseek(cipher,0,SEEK_END); /* 將文件指針置尾 */
fileLen = ftell(cipher); /* 取文件指針當前位置 */
rewind(cipher); /* 將文件指針重指向文件頭 */
while(1){
/* 密文的位元組數一定是8的整數倍 */
fread(cipherBlock,sizeof(char),8,cipher);
DES_DecryptBlock(cipherBlock,subKeys,plainBlock);
times += 8;
if(times < fileLen){
fwrite(plainBlock,sizeof(char),8,plain);
}
else{
break;
}
}
/* 判斷末尾是否被填充 */
if(plainBlock[7] < 8){
for(count = 8 - plainBlock[7]; count < 7; count++){
if(plainBlock[count] != '\0'){
break;
}
}
}
if(count == 7){/* 有填充 */
fwrite(plainBlock,sizeof(char),8 - plainBlock[7],plain);
}
else{/* 無填充 */
fwrite(plainBlock,sizeof(char),8,plain);
}
fclose(plain);
fclose(cipher);
return OK;
}
int main()
{ DES_Encrypt("1.txt","key.txt","2.txt");
system("pause");
DES_Decrypt("2.txt","key.txt","3.txt");
getchar();
return 0;
}
⑦ des加密演算法(c/c++)
des.h文件：
#ifndefCRYPTOPP_DES_H
#defineCRYPTOPP_DES_H
#include"cryptlib.h"
#include"misc.h"
NAMESPACE_BEGIN(CryptoPP)
classDES:publicBlockTransformation
{
public:
DES(constbyte*userKey,CipherDir);
voidProcessBlock(constbyte*inBlock,byte*outBlock)const;
voidProcessBlock(byte*inoutBlock)const
{DES::ProcessBlock(inoutBlock,inoutBlock);}
enum{KEYLENGTH=8,BLOCKSIZE=8};
unsignedintBlockSize()const{returnBLOCKSIZE;}
protected:
staticconstword32Spbox[8][64];
SecBlock<word32>k;
};
classDESEncryption:publicDES
{
public:
DESEncryption(constbyte*userKey)
:DES(userKey,ENCRYPTION){}
};
classDESDecryption:publicDES
{
public:
DESDecryption(constbyte*userKey)
:DES(userKey,DECRYPTION){}
};
classDES_EDE_Encryption:publicBlockTransformation
{
public:
DES_EDE_Encryption(constbyte*userKey)
:e(userKey,ENCRYPTION),d(userKey+DES::KEYLENGTH,DECRYPTION){}
voidProcessBlock(constbyte*inBlock,byte*outBlock)const;
voidProcessBlock(byte*inoutBlock)const;
enum{KEYLENGTH=16,BLOCKSIZE=8};
unsignedintBlockSize()const{returnBLOCKSIZE;}
private:
DESe,d;
};
classDES_EDE_Decryption:publicBlockTransformation
{
public:
DES_EDE_Decryption(constbyte*userKey)
:d(userKey,DECRYPTION),e(userKey+DES::KEYLENGTH,ENCRYPTION){}
voidProcessBlock(constbyte*inBlock,byte*outBlock)const;
voidProcessBlock(byte*inoutBlock)const;
enum{KEYLENGTH=16,BLOCKSIZE=8};
unsignedintBlockSize()const{returnBLOCKSIZE;}
private:
DESd,e;
};
classTripleDES_Encryption:publicBlockTransformation
{
public:
TripleDES_Encryption(constbyte*userKey)
:e1(userKey,ENCRYPTION),d(userKey+DES::KEYLENGTH,DECRYPTION),
e2(userKey+2*DES::KEYLENGTH,ENCRYPTION){}
voidProcessBlock(constbyte*inBlock,byte*outBlock)const;
voidProcessBlock(byte*inoutBlock)const;
enum{KEYLENGTH=24,BLOCKSIZE=8};
unsignedintBlockSize()const{returnBLOCKSIZE;}
private:
DESe1,d,e2;
};
classTripleDES_Decryption:publicBlockTransformation
{
public:
TripleDES_Decryption(constbyte*userKey)
:d1(userKey+2*DES::KEYLENGTH,DECRYPTION),e(userKey+DES::KEYLENGTH,ENCRYPTION),
d2(userKey,DECRYPTION){}
voidProcessBlock(constbyte*inBlock,byte*outBlock)const;
voidProcessBlock(byte*inoutBlock)const;
enum{KEYLENGTH=24,BLOCKSIZE=8};
unsignedintBlockSize()const{returnBLOCKSIZE;}
private:
DESd1,e,d2;
};
NAMESPACE_END
#endif
des.cpp文件：
//des.cpp-modifiedbyWeiDaifrom:
/*
*
*circa1987,'s1977
*publicdomaincode.,but
*theactualencrypt/
*Outerbridge'sDEScodeasprintedinSchneier's"AppliedCryptography."
*
*Thiscodeisinthepublicdomain.Iwouldappreciatebugreportsand
*enhancements.
*
*PhilKarnKA9Q,[email protected],August1994.
*/
#include"pch.h"
#include"misc.h"
#include"des.h"
NAMESPACE_BEGIN(CryptoPP)
/*
*Threeofthesetables,theinitialpermutation,thefinal
*,areregularenoughthat
*forspeed,wehard-codethem.They'rehereforreferenceonly.
*Also,,gensp.c,
*tobuildthecombinedSPbox,Spbox[].They'realsoherejust
*forreference.
*/
#ifdefnotdef
/*initialpermutationIP*/
staticbyteip[]={
58,50,42,34,26,18,10,2,
60,52,44,36,28,20,12,4,
62,54,46,38,30,22,14,6,
64,56,48,40,32,24,16,8,
57,49,41,33,25,17,9,1,
59,51,43,35,27,19,11,3,
61,53,45,37,29,21,13,5,
63,55,47,39,31,23,15,7
};
/*finalpermutationIP^-1*/
staticbytefp[]={
40,8,48,16,56,24,64,32,
39,7,47,15,55,23,63,31,
38,6,46,14,54,22,62,30,
37,5,45,13,53,21,61,29,
36,4,44,12,52,20,60,28,
35,3,43,11,51,19,59,27,
34,2,42,10,50,18,58,26,
33,1,41,9,49,17,57,25
};
/*expansionoperationmatrix*/
staticbyteei[]={
32,1,2,3,4,5,
4,5,6,7,8,9,
8,9,10,11,12,13,
12,13,14,15,16,17,
16,17,18,19,20,21,
20,21,22,23,24,25,
24,25,26,27,28,29,
28,29,30,31,32,1
};
/*The(in)famousS-boxes*/
staticbytesbox[8][64]={
/*S1*/
14,4,13,1,2,15,11,8,3,10,6,12,5,9,0,7,
0,15,7,4,14,2,13,1,10,6,12,11,9,5,3,8,
4,1,14,8,13,6,2,11,15,12,9,7,3,10,5,0,
15,12,8,2,4,9,1,7,5,11,3,14,10,0,6,13,
/*S2*/
15,1,8,14,6,11,3,4,9,7,2,13,12,0,5,10,
3,13,4,7,15,2,8,14,12,0,1,10,6,9,11,5,
0,14,7,11,10,4,13,1,5,8,12,6,9,3,2,15,
13,8,10,1,3,15,4,2,11,6,7,12,0,5,14,9,
/*S3*/
10,0,9,14,6,3,15,5,1,13,12,7,11,4,2,8,
13,7,0,9,3,4,6,10,2,8,5,14,12,11,15,1,
13,6,4,9,8,15,3,0,11,1,2,12,5,10,14,7,
1,10,13,0,6,9,8,7,4,15,14,3,11,5,2,12,
/*S4*/
7,13,14,3,0,6,9,10,1,2,8,5,11,12,4,15,
13,8,11,5,6,15,0,3,4,7,2,12,1,10,14,9,
10,6,9,0,12,11,7,13,15,1,3,14,5,2,8,4,
3,15,0,6,10,1,13,8,9,4,5,11,12,7,2,14,
/*S5*/
2,12,4,1,7,10,11,6,8,5,3,15,13,0,14,9,
14,11,2,12,4,7,13,1,5,0,15,10,3,9,8,6,
4,2,1,11,10,13,7,8,15,9,12,5,6,3,0,14,
11,8,12,7,1,14,2,13,6,15,0,9,10,4,5,3,
/*S6*/
12,1,10,15,9,2,6,8,0,13,3,4,14,7,5,11,
10,15,4,2,7,12,9,5,6,1,13,14,0,11,3,8,
9,14,15,5,2,8,12,3,7,0,4,10,1,13,11,6,
4,3,2,12,9,5,15,10,11,14,1,7,6,0,8,13,
/*S7*/
4,11,2,14,15,0,8,13,3,12,9,7,5,10,6,1,
13,0,11,7,4,9,1,10,14,3,5,12,2,15,8,6,
1,4,11,13,12,3,7,14,10,15,6,8,0,5,9,2,
6,11,13,8,1,4,10,7,9,5,0,15,14,2,3,12,
/*S8*/
13,2,8,4,6,15,11,1,10,9,3,14,5,0,12,7,
1,15,13,8,10,3,7,4,12,5,6,11,0,14,9,2,
7,11,4,1,9,12,14,2,0,6,10,13,15,3,5,8,
2,1,14,7,4,10,8,13,15,12,9,0,3,5,6,11
};
/*32--boxes*/
staticbytep32i[]={
16,7,20,21,
29,12,28,17,
1,15,23,26,
5,18,31,10,
2,8,24,14,
32,27,3,9,
19,13,30,6,
22,11,4,25
};
#endif
/*permutedchoicetable(key)*/
staticconstbytepc1[]={
57,49,41,33,25,17,9,
1,58,50,42,34,26,18,
10,2,59,51,43,35,27,
19,11,3,60,52,44,36,
63,55,47,39,31,23,15,
7,62,54,46,38,30,22,
14,6,61,53,45,37,29,
21,13,5,28,20,12,4
};
/*numberleftrotationsofpc1*/
staticconstbytetotrot[]={
1,2,4,6,8,10,12,14,15,17,19,21,23,25,27,28
};
/*permutedchoicekey(table)*/
staticconstbytepc2[]={
14,17,11,24,1,5,
3,28,15,6,21,10,
23,19,12,4,26,8,
16,7,27,20,13,2,
41,52,31,37,47,55,
30,40,51,45,33,48,
44,49,39,56,34,53,
46,42,50,36,29,32
};
/*EndofDES-definedtables*/
/*bit0isleft-mostinbyte*/
staticconstintbytebit[]={
0200,0100,040,020,010,04,02,01
};
/*Setkey(initializekeyschelearray)*/
DES::DES(constbyte*key,CipherDirdir)
:k(32)
{
SecByteBlockbuffer(56+56+8);
byte*constpc1m=buffer;/*placetomodifypc1into*/
byte*constpcr=pc1m+56;/*placetorotatepc1into*/
byte*constks=pcr+56;
registerinti,j,l;
intm;
for(j=0;j<56;j++){/*convertpc1tobitsofkey*/
l=pc1[j]-1;/*integerbitlocation*/
m=l&07;/*findbit*/
pc1m[j]=(key[l>>3]&/*findwhichkeybytelisin*/
bytebit[m])/*andwhichbitofthatbyte*/
?1:0;/*andstore1-bitresult*/
}
for(i=0;i<16;i++){/*keychunkforeachiteration*/
memset(ks,0,8);/*Clearkeyschele*/
for(j=0;j<56;j++)/*rotatepc1therightamount*/
pcr[j]=pc1m[(l=j+totrot[i])<(j<28?28:56)?l:l-28];
/**/
for(j=0;j<48;j++){/*selectbitsindivially*/
/*checkbitthatgoestoks[j]*/
if(pcr[pc2[j]-1]){
/*maskitinifit'sthere*/
l=j%6;
ks[j/6]|=bytebit[l]>>2;
}
}
/*Nowconverttoodd/eveninterleavedformforuseinF*/
k[2*i]=((word32)ks[0]<<24)
|((word32)ks[2]<<16)
|((word32)ks[4]<<8)
|((word32)ks[6]);
k[2*i+1]=((word32)ks[1]<<24)
|((word32)ks[3]<<16)
|((word32)ks[5]<<8)
|((word32)ks[7]);
}
if(dir==DECRYPTION)//reversekeyscheleorder
for(i=0;i<16;i+=2)
{
std::swap(k[i],k[32-2-i]);
std::swap(k[i+1],k[32-1-i]);
}
}
/**/
/*Ccodeonlyinportableversion*/
//RichardOuterbridge'sinitialpermutationalgorithm
/*
inlinevoidIPERM(word32&left,word32&right)
{
word32work;
work=((left>>4)^right)&0x0f0f0f0f;
right^=work;
left^=work<<4;
work=((left>>16)^right)&0xffff;
right^=work;
left^=work<<16;
work=((right>>2)^left)&0x33333333;
left^=work;
right^=(work<<2);
work=((right>>8)^left)&0xff00ff;
left^=work;
right^=(work<<8);
right=rotl(right,1);
work=(left^right)&0xaaaaaaaa;
left^=work;
right^=work;
left=rotl(left,1);
}
inlinevoidFPERM(word32&left,word32&right)
{
word32work;
right=rotr(right,1);
work=(left^right)&0xaaaaaaaa;
left^=work;
right^=work;
left=rotr(left,1);
work=((left>>8)^right)&0xff00ff;
right^=work;
left^=work<<8;
work=((left>>2)^right)&0x33333333;
right^=work;
left^=work<<2;
work=((right>>16)^left)&0xffff;
left^=work;
right^=work<<16;
work=((right>>4)^left)&0x0f0f0f0f;
left^=work;
right^=work<<4;
}
*/
//WeiDai''sinitialpermutation
//algorithm,
//(likeinMSVC)
inlinevoidIPERM(word32&left,word32&right)
{
word32work;
right=rotl(right,4U);
work=(left^right)&0xf0f0f0f0;
left^=work;
right=rotr(right^work,20U);
work=(left^right)&0xffff0000;
left^=work;
right=rotr(right^work,18U);
work=(left^right)&0x33333333;
left^=work;
right=rotr(right^work,6U);
work=(left^right)&0x00ff00ff;
left^=work;
right=rotl(right^work,9U);
work=(left^right)&0xaaaaaaaa;
left=rotl(left^work,1U);
right^=work;
}
inlinevoidFPERM(word32&left,word32&right)
{
word32work;
right=rotr(right,1U);
work=(left^right)&0xaaaaaaaa;
right^=work;
left=rotr(left^work,9U);
work=(left^right)&0x00ff00ff;
right^=work;
left=rotl(left^work,6U);
work=(left^right)&0x33333333;
right^=work;
left=rotl(left^work,18U);
work=(left^right)&0xffff0000;
right^=work;
left=rotl(left^work,20U);
work=(left^right)&0xf0f0f0f0;
right^=work;
left=rotr(left^work,4U);
}
//
voidDES::ProcessBlock(constbyte*inBlock,byte*outBlock)const
{
word32l,r,work;
#ifdefIS_LITTLE_ENDIAN
l=byteReverse(*(word32*)inBlock);
r=byteReverse(*(word32*)(inBlock+4));
#else
l=*(word32*)inBlock;
r=*(word32*)(inBlock+4);
#endif
IPERM(l,r);
constword32*kptr=k;
for(unsignedi=0;i<8;i++)
{
work=rotr(r,4U)^kptr[4*i+0];
l^=Spbox[6][(work)&0x3f]
^Spbox[4][(work>>8)&0x3f]
^Spbox[2][(work>>16)&0x3f]
^Spbox[0][(work>>24)&0x3f];
work=r^kptr[4*i+1];
l^=Spbox[7][(work)&0x3f]
^Spbox[5][(work>>8)&0x3f]
^Spbox[3][(work>>16)&0x3f]
^Spbox[1][(work>>24)&0x3f];
work=rotr(l,4U)^kptr[4*i+2];
r^=Spbox[6][(work)&0x3f]
^Spbox[4][(work>>8)&0x3f]
^Spbox[2][(work>>16)&0x3f]
^Spbox[0][(work>>24)&0x3f];
work=l^kptr[4*i+3];
r^=Spbox[7][(work)&0x3f]
^Spbox[5][(work>>8)&0x3f]
^Spbox[3][(work>>16)&0x3f]
^Spbox[1][(work>>24)&0x3f];
}
FPERM(l,r);
#ifdefIS_LITTLE_ENDIAN
*(word32*)outBlock=byteReverse(r);
*(word32*)(outBlock+4)=byteReverse(l);
#else
*(word32*)outBlock=r;
*(word32*)(outBlock+4)=l;
#endif
}
voidDES_EDE_Encryption::ProcessBlock(byte*inoutBlock)const
{
e.ProcessBlock(inoutBlock);
d.ProcessBlock(inoutBlock);
e.ProcessBlock(inoutBlock);
}
voidDES_EDE_Encryption::ProcessBlock(constbyte*inBlock,byte*outBlock)const
{
e.ProcessBlock(inBlock,outBlock);
d.ProcessBlock(outBlock);
e.ProcessBlock(outBlock);
}
voidDES_EDE_Decryption::ProcessBlock(byte*inoutBlock)const
{
d.ProcessBlock(inoutBlock);
e.ProcessBlock(inoutBlock);
d.ProcessBlock(inoutBlock);
}
voidDES_EDE_Decryption::ProcessBlock(constbyte*inBlock,byte*outBlock)const
{
d.ProcessBlock(inBlock,outBlock);
e.ProcessBlock(outBlock);
d.ProcessBlock(outBlock);
}
voidTripleDES_Encryption::ProcessBlock(byte*inoutBlock)const
{
e1.ProcessBlock(inoutBlock);
d.ProcessBlock(inoutBlock);
e2.ProcessBlock(inoutBlock);
}
voidTripleDES_Encryption::ProcessBlock(constbyte*inBlock,byte*outBlock)const
{
e1.ProcessBlock(inBlock,outBlock);
d.ProcessBlock(outBlock);
e2.ProcessBlock(outBlock);
}
voidTripleDES_Decryption::ProcessBlock(byte*inoutBlock)const
{
d1.ProcessBlock(inoutBlock);
e.ProcessBlock(inoutBlock);
d2.ProcessBlock(inoutBlock);
}
voidTripleDES_Decryption::ProcessBlock(constbyte*inBlock,byte*outBlock)const
{
d1.ProcessBlock(inBlock,outBlock);
e.ProcessBlock(outBlock);
d2.ProcessBlock(outBlock);
}
NAMESPACE_END
程序運行如下：
⑧ 如題，求java的DES演算法代碼，可以用於解密用C語言寫的DES加密演算法！其中C語言代碼見問題補充
俺就是來幫助你這樣可愛的人。俺可是花了幾年的時間費了多大的力氣才能把這個東西弄出來！
DES加密還沒有AES嚴密：
packagecom.palic.pss.afcs.worldthrough.common.util;
importjavax.crypto.Cipher;
importjavax.crypto.spec.SecretKeySpec;
importrepack.com.thoughtworks.xstream.core.util.Base64Encoder;
/**
*AES加密解密
*@author
*
*/
publicclassAesUtils{
publicstaticfinalStringcKey="assistant7654321";
/**
*加密--把加密後的byte數組先進行二進制轉16進制在進行base64編碼
*@paramsSrc
*@paramsKey
*@return
*@throwsException
*/
publicstaticStringencrypt(StringsSrc,StringsKey)throwsException{
if(sKey==null){
("ArgumentsKeyisnull.");
}
if(sKey.length()!=16){
(
"ArgumentsKey'lengthisnot16.");
}
byte[]raw=sKey.getBytes("ASCII");
SecretKeySpecskeySpec=newSecretKeySpec(raw,"AES");
Ciphercipher=Cipher.getInstance("AES");
cipher.init(Cipher.ENCRYPT_MODE,skeySpec);
byte[]encrypted=cipher.doFinal(sSrc.getBytes("UTF-8"));
StringtempStr=parseByte2HexStr(encrypted);
Base64Encoderencoder=newBase64Encoder();
returnencoder.encode(tempStr.getBytes("UTF-8"));
}
/**
*解密--先進行base64解碼，在進行16進制轉為2進制然後再解碼
*@paramsSrc
*@paramsKey
*@return
*@throwsException
*/
publicstaticStringdecrypt(StringsSrc,StringsKey)throwsException{
if(sKey==null){
("499");
}
if(sKey.length()!=16){
("498");
}
byte[]raw=sKey.getBytes("ASCII");
SecretKeySpecskeySpec=newSecretKeySpec(raw,"AES");
Ciphercipher=Cipher.getInstance("AES");
cipher.init(Cipher.DECRYPT_MODE,skeySpec);
Base64Encoderencoder=newBase64Encoder();
byte[]encrypted1=encoder.decode(sSrc);
StringtempStr=newString(encrypted1,"utf-8");
encrypted1=parseHexStr2Byte(tempStr);
byte[]original=cipher.doFinal(encrypted1);
StringoriginalString=newString(original,"utf-8");
returnoriginalString;
}
/**
*將二進制轉換成16進制
*
*@parambuf
*@return
*/
(bytebuf[]){
StringBuffersb=newStringBuffer();
for(inti=0;i<buf.length;i++){
Stringhex=Integer.toHexString(buf[i]&0xFF);
if(hex.length()==1){
hex='0'+hex;
}
sb.append(hex.toUpperCase());
}
returnsb.toString();
}
/**
*將16進制轉換為二進制
*
*@paramhexStr
*@return
*/
publicstaticbyte[]parseHexStr2Byte(StringhexStr){
if(hexStr.length()<1)
returnnull;
byte[]result=newbyte[hexStr.length()/2];
for(inti=0;i<hexStr.length()/2;i++){
inthigh=Integer.parseInt(hexStr.substring(i*2,i*2+1),16);
intlow=Integer.parseInt(hexStr.substring(i*2+1,i*2+2),
16);
result[i]=(byte)(high*16+low);
}
returnresult;
}
publicstaticvoidmain(String[]args)throwsException{
/*
*加密用的Key可以用26個字母和數字組成，最好不要用保留字元，雖然不會錯，至於怎麼裁決，個人看情況而定
*/
StringcKey="assistant7654321";
//需要加密的字串
StringcSrc="123456";
//加密
longlStart=System.currentTimeMillis();
StringenString=encrypt(cSrc,cKey);
System.out.println("加密後的字串是："+enString);
longlUseTime=System.currentTimeMillis()-lStart;
System.out.println("加密耗時："+lUseTime+"毫秒");
//解密
lStart=System.currentTimeMillis();
StringDeString=decrypt(enString,cKey);
System.out.println("解密後的字串是："+DeString);
lUseTime=System.currentTimeMillis()-lStart;
System.out.println("解密耗時："+lUseTime+"毫秒");
}
}
⑨ C#調有openssl中libeay32.dllDES加密解密的源碼例子！
我沒用過這個語言，所以解答的可能不太正確。以下我只是建議
(以下是基於我編程時的經驗說的，有可能由於語言上的差異造成疑問。)
首先問幾個問題:"將src中原文讀入數組in中"文件應該是位元組集吧你用數組做什麼呢？
這些是你的代碼中的一些涉及到16的代碼：
1、//key為16位元組
2、for(i=0;i<16;i++)
這個可能是演算法上的問題。至於寫入代碼，沒看到什麼引起異常的東西。
解決：(假設以上判斷正確，因為你的程序只要不加密16的整數倍大小文件就沒錯。)你可以試試一個雙向判斷加密時如果正好是16的整數倍在文件頭或文件尾加入某些多餘數據。解密時分析是否曾經加入過數據並在解密前將文件還原[請注意很可能解密時也會出錯，所以建議你想辦法在解密後再還原文件。(如果可以的話。)]
這只代表我個人觀點 我不是專家我也只是建議……
⑩ 使用C/C++語言,將DES/AES加密演算法,用代碼實現
哎，學校大作業吧。核心是des和aes的演算法唄，自己一點點寫代碼量不很少呢。沒時間給你寫了。
不過有個很好的偷懶辦法：建議lz你去找一下OpenSSL的源碼。裡面有AES，DES的原生C實現。現成函數。lz你直接從裡面摳出來復制到你工程里就行了。。