俄羅斯方塊源碼android
1. 俄羅斯方塊的源程序
#include<stdio.h>
#include <graphics.h>
#include <dos.h>
#include <stdlib.h>
#define UP 0x48
#define DOWN 0x50
#define LEFT 0x4b
#define RIGHT 0x4d
#define ESC 0x01
#define P 0x19
#define ENTER 0x1c
#define PAGEUP 0x49
#define PAGEDOWN 0x51
#define add_D 0x0d
#define add_d 0x4e
#define sub_D 0x0c
#define sub_d 0x4a
#define RST 0x13
#define PAUSE 0x19
long score;
int brick_width=20;
char str[9]={'0','0','0','0','0','0','0','0','\0'}; /*積分數組!*/
int m_speed=0;
int difficulty=0;
/************************************************/
/*以下定義的是磚塊的形狀*/
int brick [6][4][4][4]=
{
{
{{0,1,0,0},{0,1,1,0},{0,0,1,0},{0,0,0,0}},
{{0,1,1,0},{1,1,0,0},{0,0,0,0},{0,0,0,0}},
{{0,1,0,0},{0,1,1,0},{0,0,1,0},{0,0,0,0}},
{{0,1,1,0},{1,1,0,0},{0,0,0,0},{0,0,0,0}}
},
{
{{0,1,0,0},{1,1,1,0},{0,0,0,0},{0,0,0,0}},
{{0,1,0,0},{0,1,1,0},{0,1,0,0},{0,0,0,0}},
{{0,0,0,0},{1,1,1,0},{0,1,0,0},{0,0,0,0}},
{{0,1,0,0},{1,1,0,0},{0,1,0,0},{0,0,0,0}}
},
{
{{0,0,1,0},{0,1,1,0},{0,1,0,0},{0,0,0,0}},
{{0,1,1,0},{0,0,1,1},{0,0,0,0},{0,0,0,0}},
{{0,0,1,0},{0,1,1,0},{0,1,0,0},{0,0,0,0}},
{{0,1,1,0},{0,0,1,1},{0,0,0,0},{0,0,0,0}}
},
{
{{0,1,0,0},{0,1,0,0},{0,1,0,0},{0,1,0,0}},
{{0,0,0,0},{1,1,1,1},{0,0,0,0},{0,0,0,0}},
{{0,1,0,0},{0,1,0,0},{0,1,0,0},{0,1,0,0}},
{{0,0,0,0},{1,1,1,1},{0,0,0,0},{0,0,0,0}}
},
{
{{0,1,1,0},{0,1,1,0},{0,0,0,0},{0,0,0,0}},
{{0,1,1,0},{0,1,1,0},{0,0,0,0},{0,0,0,0}},
{{0,1,1,0},{0,1,1,0},{0,0,0,0},{0,0,0,0}},
{{0,1,1,0},{0,1,1,0},{0,0,0,0},{0,0,0,0}}
},
{
{{1,1,1,0},{1,0,0,0},{0,0,0,0},{0,0,0,0}},
{{1,1,0,0},{0,1,0,0},{0,1,0,0},{0,0,0,0}},
{{0,0,1,0},{1,1,1,0},{0,0,0,0},{0,0,0,0}},
{{1,0,0,0},{1,0,0,0},{1,1,0,0},{0,0,0,0}}
}
};
/*以下定義的是游戲窗口的矩陣,在游戲進行時,通過檢查此矩陣來獲知磚塊的堆積情況*/
int board[22][12]={
{2,2,2,2,2,2,2,2,2,2,2,2},
{2,0,0,0,0,0,0,0,0,0,0,2},
{2,0,0,0,0,0,0,0,0,0,0,2},
{2,0,0,0,0,0,0,0,0,0,0,2},
{2,0,0,0,0,0,0,0,0,0,0,2},
{2,0,0,0,0,0,0,0,0,0,0,2},
{2,0,0,0,0,0,0,0,0,0,0,2},
{2,0,0,0,0,0,0,0,0,0,0,2},
{2,0,0,0,0,0,0,0,0,0,0,2},
{2,0,0,0,0,0,0,0,0,0,0,2},
{2,0,0,0,0,0,0,0,0,0,0,2},
{2,0,0,0,0,0,0,0,0,0,0,2},
{2,0,0,0,0,0,0,0,0,0,0,2},
{2,0,0,0,0,0,0,0,0,0,0,2},
{2,0,0,0,0,0,0,0,0,0,0,2},
{2,0,0,0,0,0,0,0,0,0,0,2},
{2,0,0,0,0,0,0,0,0,0,0,2},
{2,0,0,0,0,0,0,0,0,0,0,2},
{2,0,0,0,0,0,0,0,0,0,0,2},
{2,0,0,0,0,0,0,0,0,0,0,2},
{2,0,0,0,0,0,0,0,0,0,0,2},
{2,2,2,2,2,2,2,2,2,2,2,2}
};
/*以下是程序中用到漢字的點陣——————————————————*/
char e_16[]={
/* 以下是 '俄' 的 16點陣宋體 字模，32 byte */
0x10,0x20,0x19,0xA8,0x16,0x24,0x22,0x24,
0x3F,0xFE,0x62,0x20,0xA2,0x24,0x22,0xA6,
0x23,0x2C,0x26,0x28,0x2A,0x10,0x22,0x30,
0x22,0x4A,0x2E,0x8A,0x24,0x04,0x00,0x00,
};
char luo_16[]={
/* 以下是 '羅' 的 16點陣宋體 字模，32 byte */
0x00,0x00,0x3F,0xFC,0x22,0x44,0x22,0x44,
0x22,0x44,0x3F,0xFC,0x22,0x00,0x03,0xFC,
0x06,0x08,0x0C,0x08,0x12,0x10,0x61,0x20,
0x00,0xC0,0x03,0x00,0x0C,0x00,0xF0,0x00,
};
char si_16[]={
/* 以下是 '斯' 的 16點陣宋體 字模，32 byte */
0x22,0x0C,0x22,0x70,0xFF,0x40,0x22,0x40,
0x3E,0x40,0x22,0x7E,0x22,0x48,0x3E,0x48,
0x22,0x48,0x22,0x48,0xFF,0x48,0x00,0x48,
0x24,0x88,0x62,0x88,0x83,0x08,0x00,0x08,
};
char fang_16[]={
/* 以下是 '方' 的 16點陣宋體 字模，32 byte */
0x02,0x00,0x01,0x00,0x00,0x80,0xFF,0xFE,
0x02,0x00,0x02,0x00,0x03,0xF0,0x02,0x10,
0x04,0x10,0x04,0x10,0x08,0x10,0x08,0x10,
0x10,0x10,0x20,0x90,0xC0,0x60,0x00,0x00,
};
char kuai_16[]={
/* 以下是 '塊' 的 16點陣宋體 字模，32 byte */
0x20,0x80,0x20,0x80,0x20,0x80,0x23,0xF8,
0xF8,0x88,0x20,0x88,0x20,0x88,0x20,0x88,
0x2F,0xFE,0x20,0x80,0x39,0x40,0xE1,0x20,
0x42,0x18,0x02,0x0E,0x04,0x04,0x08,0x00,
};
char kai_16[]={
/* 以下是 '開' 的 16點陣宋體 字模，32 byte */
0x00,0x00,0x7F,0xFE,0x04,0x20,0x04,0x20,
0x04,0x20,0x04,0x20,0xFF,0xFE,0x04,0x20,
0x04,0x20,0x04,0x20,0x08,0x20,0x08,0x20,
0x10,0x20,0x20,0x20,0x40,0x20,0x00,0x00,
};
char shi_16[]={
/* 以下是 '始' 的 16點陣宋體 字模，32 byte */
0x10,0x20,0x18,0x30,0x10,0x20,0x10,0x48,
0xFC,0x84,0x25,0xFE,0x24,0x84,0x44,0x00,
0x44,0xFC,0x28,0x84,0x18,0x84,0x14,0x84,
0x22,0x84,0x42,0xFC,0x80,0x84,0x00,0x00,
};
char tui_16[]={
/* 以下是 '退' 的 16點陣宋體 字模，32 byte */
0x40,0x00,0x27,0xF0,0x24,0x10,0x07,0xF0,
0x04,0x10,0x04,0x10,0xE7,0xF0,0x24,0x88,
0x24,0x50,0x24,0x20,0x25,0x10,0x26,0x18,
0x24,0x08,0x50,0x00,0x8F,0xFE,0x00,0x00,
};
char chu_16[]={
/* 以下是 '出' 的 16點陣宋體 字模，32 byte */
0x01,0x00,0x01,0x00,0x21,0x04,0x21,0x04,
0x21,0x04,0x21,0x04,0x3F,0xFC,0x21,0x04,
0x01,0x00,0x21,0x04,0x21,0x04,0x21,0x04,
0x21,0x04,0x3F,0xFC,0x20,0x04,0x00,0x00,
};
char you_16[]={
/* 以下是 '游' 的 16點陣宋體 字模，32 byte */
0x44,0x20,0x22,0x20,0x22,0x20,0x0F,0xBE,
0x84,0x40,0x54,0xBC,0x57,0x08,0x25,0x10,
0x25,0x10,0x25,0x7E,0xC5,0x10,0x49,0x10,
0x49,0x10,0x49,0x10,0x55,0x50,0x42,0x20,
};
char xi_16[]={
/* 以下是 '戲' 的 16點陣宋體 字模，32 byte */
0x00,0x40,0x00,0x50,0x7E,0x48,0x02,0x48,
0x44,0x40,0x25,0xFE,0x18,0x40,0x08,0x44,
0x0C,0x28,0x14,0x30,0x12,0x20,0x22,0x50,
0x41,0x92,0x06,0x0A,0x00,0x06,0x00,0x02,
};
char xia_16[]={
/* 以下是 '下' 的 16點陣宋體 字模，32 byte */
0x00,0x04,0x7F,0xFE,0x01,0x00,0x01,0x00,
0x01,0x00,0x01,0xC0,0x01,0x60,0x01,0x30,
0x01,0x20,0x01,0x00,0x01,0x00,0x01,0x00,
0x01,0x00,0x01,0x00,0x01,0x00,0x00,0x00,
};
char ge_16[]={
/* 以下是 '個' 的 16點陣宋體 字模，32 byte */
0x01,0x00,0x01,0x00,0x02,0x80,0x02,0x40,
0x04,0x20,0x09,0x18,0x11,0x0E,0x61,0x04,
0x01,0x00,0x01,0x00,0x01,0x00,0x01,0x00,
0x01,0x00,0x01,0x00,0x01,0x00,0x00,0x00,
};
char tu_16[]={
/* 以下是 '圖' 的 16點陣宋體 字模，32 byte */
0x00,0x00,0x7F,0xFC,0x44,0x04,0x47,0xE4,
0x44,0x44,0x4A,0x84,0x71,0x04,0x42,0xC4,
0x4C,0x3C,0x71,0x14,0x40,0x84,0x42,0x04,
0x41,0x84,0x41,0x04,0x7F,0xFC,0x40,0x04,
};
char xing_16[]={
/* 以下是 '形' 的 16點陣宋體 字模，32 byte */
0x00,0x04,0x7F,0x86,0x12,0x0C,0x12,0x10,
0x12,0x20,0x12,0x08,0xFF,0xCC,0x12,0x18,
0x12,0x20,0x12,0x44,0x12,0x86,0x12,0x0C,
0x22,0x10,0x22,0x20,0x42,0x40,0x80,0x80,
};
char fen_16[]={
/* 以下是 '分' 的 16點陣宋體 字模，32 byte */
0x08,0x80,0x0C,0x80,0x08,0x40,0x10,0x20,
0x10,0x30,0x20,0x18,0x40,0x0E,0x9F,0xE4,
0x04,0x20,0x04,0x20,0x04,0x20,0x04,0x20,
0x08,0x20,0x10,0xA0,0x20,0x40,0x40,0x00,
};
char shu_16[]={
/* 以下是 '數' 的 16點陣宋體 字模，32 byte */
0x08,0x20,0x49,0x30,0x2A,0x20,0x1C,0x20,
0xFF,0x7E,0x1C,0x44,0x2B,0x44,0x48,0xC4,
0x08,0x28,0xFF,0x28,0x12,0x10,0x34,0x10,
0x0C,0x28,0x32,0x4E,0xC0,0x84,0x00,0x00,
};
char bd_16[]={
/* 以下是 '：' 的 16點陣宋體 字模，32 byte */
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x30,0x00,0x30,0x00,0x00,0x00,
0x30,0x00,0x30,0x00,0x00,0x00,0x00,0x00,
};
char su_16[]={
/* 以下是 '速' 的 16點陣宋體 字模，32 byte */
0x00,0x80,0x40,0x80,0x2F,0xFC,0x20,0x80,
0x00,0x80,0x07,0xF8,0xE4,0x88,0x24,0x88,
0x27,0xF8,0x21,0xA0,0x22,0x98,0x2C,0x88,
0x20,0x80,0x50,0x80,0x8F,0xFE,0x00,0x00,
};
char _16[]={
/* 以下是 '度' 的 16點陣宋體 字模，32 byte */
0x01,0x00,0x00,0x80,0x3F,0xFE,0x22,0x20,
0x22,0x20,0x2F,0xFC,0x22,0x20,0x23,0xE0,
0x20,0x00,0x27,0xF8,0x22,0x10,0x21,0x20,
0x20,0xC0,0x41,0x30,0x46,0x0E,0x98,0x04,
};
char cong_16[]={
/* 以下是 '從' 的 16點陣宋體 字模，32 byte */
0x08,0x40,0x08,0x40,0x08,0x40,0x08,0x40,
0x08,0x40,0x08,0x40,0x08,0x40,0x08,0xA0,
0x14,0xA0,0x12,0x90,0x12,0x90,0x21,0x08,
0x23,0x0C,0x42,0x06,0x84,0x04,0x08,0x00,
};
char xin_16[]={
/* 以下是 '新' 的 16點陣宋體 字模，32 byte */
0x10,0x00,0x08,0x0E,0x7F,0x70,0x22,0x40,
0x14,0x40,0xFF,0x7E,0x08,0x48,0x08,0x48,
0xFF,0x48,0x08,0x48,0x2C,0x48,0x2A,0x88,
0x4A,0x88,0x89,0x08,0x2A,0x08,0x10,0x08,
};
char nan_16[]={
/* 以下是 '難' 的 16點陣宋體 字模，32 byte */
0x00,0xA0,0x00,0x90,0xF9,0x10,0x09,0xFE,
0x8B,0x20,0x4B,0x20,0x2D,0xFC,0x11,0x20,
0x19,0x20,0x29,0xFC,0x25,0x20,0x45,0x20,
0x81,0x20,0x01,0xFE,0x01,0x00,0x01,0x00,
};
char xuan_16[]={
/* 以下是 '選' 的 16點陣宋體 字模，32 byte */
0x00,0x40,0x22,0x40,0x12,0x40,0x13,0xF8,
0x04,0x40,0x00,0x40,0xF7,0xFC,0x11,0x20,
0x11,0x20,0x12,0x24,0x12,0x24,0x14,0x1C,
0x10,0x00,0x28,0x00,0x47,0xFE,0x00,0x00,
};
char ze_16[]={
/* 以下是 '擇' 的 16點陣宋體 字模，32 byte */
0x20,0x00,0x23,0xF8,0x21,0x10,0xFC,0xA0,
0x20,0x40,0x20,0xA0,0x2B,0x58,0x30,0x46,
0x63,0xF8,0xA0,0x40,0x20,0x40,0x27,0xFE,
0x20,0x40,0x20,0x40,0xA0,0x40,0x40,0x40,
};
/* 函數申明 */
int getkey();
void draw_brick(int kind,int stat,int start_x,int start_y,int *position);
void display_brick(int *position,int xexcursion,int yexcursion);
void draw_freezebrick(int *space);
void draw_mainboard();
int is_movable(int *position,int *space,int dir);
void freeze(int *position,int *space);
int check_bottom(int *space,int hei);
void ERASE(int top,int flag);
int move_down(int *position,int *space,int *top,int *flag,int speed);
void begin();
void rand_select(int *kind,int *stat);
void updata_data(int *space,int *top,int flag);
void preview(int kind_new,int stat_new);
void convert_score(long score,char *str);
void drawmat(char *,int,int,int,int);
/**************************************************/
/**********************************************************/
void drawmat(char *mat,int matsize,int x,int y,int color)
/*依次：字模指針、點陣大小、起始坐標(x,y)、顏色*/
{
int i, j, k, n;
n = (matsize - 1) / 8 + 1;
for(j = 0; j < matsize; j++)
for(i = 0; i < n; i++)
for(k = 0;k < 8; k++)
if(mat[j * n + i] & (0x80 >> k)) /*測試為1的位則顯示*/
putpixel(x + i * 8 + k, y + j, color);
}
/*初始化游戲板巨陣!*/
void init_data(int **space)
{
int hei,wid,i,j;
*space=(int *)malloc(264*sizeof(int));
/*分配的空間,"264" 是數組的長度*/
for(i=0;i<difficulty;i++)
for(j=0;j<12;j++)
board[21-i][j]=random(2);
for(hei=0;hei<22;hei++)
for(wid=0;wid<12;wid++)
*(*space+hei*12+wid)=board[hei][wid];
/*初始化*/
score=0;
}
void convert_score(long score,char *str)
{
int i;
long SCORE;
SCORE=score;
for(i=7;i>=0;i--)
{
str[i]='0'+SCORE%10;
SCORE /=10;
}
}
/**************************************************/
/*獲取鍵盤掃描碼 */
int getkey()
{
union REGS key;
key.h.ah=0;
int86(0x16,&key,&key);
return key.h.ah;
}
/*****************************************************/
/*畫方格圖形*/
void mydraw(int start_x,int start_y,int brick_width,int color)
{
settextstyle(4,0,5);
setfillstyle(6,8);
setcolor(color);
rectangle(start_x,start_y,start_x+brick_width,start_y+brick_width);
rectangle(start_x+2,start_y+2,start_x+brick_width-2,start_y+brick_width-2);
outtextxy(start_x+7,start_y+7,"*");
}
/******************************************************/
/*
用mydraw函數和position數組在屏幕上畫方塊*/
void draw_brick(int kind,int stat,int start_x,int start_y,int *position)
{
int wid,hei,x,y,i=0;
void *buf;
setviewport(100,40,300,440,1);
buf=malloc(400);
for(i=0;i<8;i+=2)
{
x=position[i];y=position[i+1];
getimage(x,y,x+brick_width,y+brick_width,buf);
putimage(x,y,buf,XOR_PUT);
}
i=0;
for(hei=0;hei<4;hei++)
{
y=start_y+hei*brick_width;
for(wid=0;wid<4;wid++)
if(brick[kind][stat][hei][wid]==1)
{
x=start_x+wid*brick_width;
position[i++]=x;
position[i++]=y;
position[10]= x > position[10] ? x : position[10];
position[11]= y > position[11] ? y : position[11];
mydraw(x,y,brick_width,10);
}
}
position[8]=start_x;
position[9]=start_y;
free(buf); /* 釋放 "buf" 所佔的內存*/
}
void display_score(char *pstr) /*顯示積分和速度（10000分加一級,最大9級）*/
{
void *buf;int n,j;char speed[2];
buf=malloc(3200);
itoa(m_speed,&speed,10);/*需要改進*/
setviewport(479,139,560,170,1);
getimage(0,0,80,40,buf);
putimage(0,0,buf,XOR_PUT);
settextstyle(0,0,1);
setcolor(WHITE);
outtextxy(0,0,pstr);
outtextxy(0,22,speed);
if(m_speed<=9)
{
n=atoi(pstr);
m_speed+=n/10000;
}
free(buf);
}
2. 求俄羅斯方塊游戲代碼
手機游戲---俄羅斯方塊http://www.onlinedown.net/soft/40673.htm
http://games.sina.com.cn/m/c/2004-10-21/1069.shtml
http://www.gamezero.cn/game8878.html
俄羅斯方塊——java源代碼提供
import java.awt.*;
import java.awt.event.*;
//俄羅斯方塊類
public class ERS_Block extends Frame{
public static boolean isPlay=false;
public static int level=1,score=0;
public static TextField scoreField,levelField;
public static MyTimer timer;
GameCanvas gameScr;
public static void main(String[] argus){
ERS_Block ers = new ERS_Block("俄羅斯方塊游戲 V1.0 Author:Vincent");
WindowListener win_listener = new WinListener();
ers.addWindowListener(win_listener);
}
//俄羅斯方塊類的構造方法
ERS_Block(String title){
super(title);
setSize(600,480);
setLayout(new GridLayout(1,2));
gameScr = new GameCanvas();
gameScr.addKeyListener(gameScr);
timer = new MyTimer(gameScr);
timer.setDaemon(true);
timer.start();
timer.suspend();
add(gameScr);
Panel rightScr = new Panel();
rightScr.setLayout(new GridLayout(2,1,0,30));
rightScr.setSize(120,500);
add(rightScr);
//右邊信息窗體的布局
MyPanel infoScr = new MyPanel();
infoScr.setLayout(new GridLayout(4,1,0,5));
infoScr.setSize(120,300);
rightScr.add(infoScr);
//定義標簽和初始值
Label scorep = new Label("分數:",Label.LEFT);
Label levelp = new Label("級數:",Label.LEFT);
scoreField = new TextField(8);
levelField = new TextField(8);
scoreField.setEditable(false);
levelField.setEditable(false);
infoScr.add(scorep);
infoScr.add(scoreField);
infoScr.add(levelp);
infoScr.add(levelField);
scorep.setSize(new Dimension(20,60));
scoreField.setSize(new Dimension(20,60));
levelp.setSize(new Dimension(20,60));
levelField.setSize(new Dimension(20,60));
scoreField.setText("0");
levelField.setText("1");
//右邊控制按鈕窗體的布局
MyPanel controlScr = new MyPanel();
controlScr.setLayout(new GridLayout(5,1,0,5));
rightScr.add(controlScr);
//定義按鈕play
Button play_b = new Button("開始游戲");
play_b.setSize(new Dimension(50,200));
play_b.addActionListener(new Command(Command.button_play,gameScr));
//定義按鈕Level UP
Button level_up_b = new Button("提高級數");
level_up_b.setSize(new Dimension(50,200));
level_up_b.addActionListener(new Command(Command.button_levelup,gameScr));
//定義按鈕Level Down
Button level_down_b =new Button("降低級數");
level_down_b.setSize(new Dimension(50,200));
level_down_b.addActionListener(new Command(Command.button_leveldown,gameScr));
//定義按鈕Level Pause
Button pause_b =new Button("游戲暫停");
pause_b.setSize(new Dimension(50,200));
pause_b.addActionListener(new Command(Command.button_pause,gameScr));
//定義按鈕Quit
Button quit_b = new Button("退出遊戲");
quit_b.setSize(new Dimension(50,200));
quit_b.addActionListener(new Command(Command.button_quit,gameScr));
controlScr.add(play_b);
controlScr.add(level_up_b);
controlScr.add(level_down_b);
controlScr.add(pause_b);
controlScr.add(quit_b);
setVisible(true);
gameScr.requestFocus();
}
}
//重寫MyPanel類，使Panel的四周留空間
class MyPanel extends Panel{
public Insets getInsets(){
return new Insets(30,50,30,50);
}
}
//游戲畫布類
class GameCanvas extends Canvas implements KeyListener{
final int unitSize = 30; //小方塊邊長
int rowNum; //正方格的行數
int columnNum; //正方格的列數
int maxAllowRowNum; //允許有多少行未削
int blockInitRow; //新出現塊的起始行坐標
int blockInitCol; //新出現塊的起始列坐標
int [][] scrArr; //屏幕數組
Block b; //對方快的引用
//畫布類的構造方法
GameCanvas(){
rowNum = 15;
columnNum = 10;
maxAllowRowNum = rowNum - 2;
b = new Block(this);
blockInitRow = rowNum - 1;
blockInitCol = columnNum/2 - 2;
scrArr = new int [32][32];
}
//初始化屏幕，並將屏幕數組清零的方法
void initScr(){
for(int i=0;i<rowNum;i++)
for (int j=0; j<columnNum;j++)
scrArr[j]=0;
b.reset();
repaint();
}
//重新刷新畫布方法
public void paint(Graphics g){
for(int i = 0; i < rowNum; i++)
for(int j = 0; j < columnNum; j++)
drawUnit(i,j,scrArr[j]);
}
//畫方塊的方法
public void drawUnit(int row,int col,int type){
scrArr[row][col] = type;
Graphics g = getGraphics();
tch(type){ //表示畫方快的方法
case 0: g.setColor(Color.black);break; //以背景為顏色畫
case 1: g.setColor(Color.blue);break; //畫正在下落的方塊
case 2: g.setColor(Color.magenta);break; //畫已經落下的方法
}
g.fill3DRect(col*unitSize,getSize().height-(row+1)*unitSize,unitSize,unitSize,true);
g.dispose();
}
public Block getBlock(){
return b; //返回block實例的引用
}
//返回屏幕數組中(row,col)位置的屬性值
public int getScrArrXY(int row,int col){
if (row < 0 || row >= rowNum || col < 0 || col >= columnNum)
return(-1);
else
return(scrArr[row][col]);
}
//返回新塊的初始行坐標方法
public int getInitRow(){
return(blockInitRow); //返回新塊的初始行坐標
}
//返回新塊的初始列坐標方法
public int getInitCol(){
return(blockInitCol); //返回新塊的初始列坐標
}
//滿行刪除方法
void deleteFullLine(){
int full_line_num = 0;
int k = 0;
for (int i=0;i<rowNum;i++){
boolean isfull = true;
L1:for(int j=0;j<columnNum;j++)
if(scrArr[j] == 0){
k++;
isfull = false;
break L1;
}
if(isfull) full_line_num++;
if(k!=0 && k-1!=i && !isfull)
for(int j = 0; j < columnNum; j++){
if (scrArr[j] == 0)
drawUnit(k-1,j,0);
else
drawUnit(k-1,j,2);
scrArr[k-1][j] = scrArr[j];
}
}
for(int i = k-1 ;i < rowNum; i++){
for(int j = 0; j < columnNum; j++){
drawUnit(i,j,0);
scrArr[j]=0;
}
}
ERS_Block.score += full_line_num;
ERS_Block.scoreField.setText(""+ERS_Block.score);
}
//判斷游戲是否結束方法
boolean isGameEnd(){
for (int col = 0 ; col <columnNum; col ++){
if(scrArr[maxAllowRowNum][col] !=0)
return true;
}
return false;
}
public void keyTyped(KeyEvent e){
}
public void keyReleased(KeyEvent e){
}
//處理鍵盤輸入的方法
public void keyPressed(KeyEvent e){
if(!ERS_Block.isPlay)
return;
tch(e.getKeyCode()){
case KeyEvent.VK_DOWN:b.fallDown();break;
case KeyEvent.VK_LEFT:b.leftMove();break;
case KeyEvent.VK_RIGHT:b.rightMove();break;
case KeyEvent.VK_SPACE:b.leftTurn();break;
}
}
}
//處理控制類
class Command implements ActionListener{
static final int button_play = 1; //給按鈕分配編號
static final int button_levelup = 2;
static final int button_leveldown = 3;
static final int button_quit = 4;
static final int button_pause = 5;
static boolean pause_resume = true;
int curButton; //當前按鈕
GameCanvas scr;
//控制按鈕類的構造方法
Command(int button,GameCanvas scr){
curButton = button;
this.scr=scr;
}
//按鈕執行方法
public void actionPerformed (ActionEvent e){
tch(curButton){
case button_play:if(!ERS_Block.isPlay){
scr.initScr();
ERS_Block.isPlay = true;
ERS_Block.score = 0;
ERS_Block.scoreField.setText("0");
ERS_Block.timer.resume();
}
scr.requestFocus();
break;
case button_levelup:if(ERS_Block.level < 10){
ERS_Block.level++;
ERS_Block.levelField.setText(""+ERS_Block.level);
ERS_Block.score = 0;
ERS_Block.scoreField.setText(""+ERS_Block.score);
}
scr.requestFocus();
break;
case button_leveldown:if(ERS_Block.level > 1){
ERS_Block.level--;
ERS_Block.levelField.setText(""+ERS_Block.level);
ERS_Block.score = 0;
ERS_Block.scoreField.setText(""+ERS_Block.score);
}
scr.requestFocus();
break;
case button_pause:if(pause_resume){
ERS_Block.timer.suspend();
pause_resume = false;
}else{
ERS_Block.timer.resume();
pause_resume = true;
}
scr.requestFocus();
break;
case button_quit:System.exit(0);
}
}
}
//方塊類
class Block {
static int[][] pattern = {
{0x0f00,0x4444,0x0f00,0x4444},//用十六進至表示，本行表示長條四種狀態
{0x04e0,0x0464,0x00e4,0x04c4},
{0x4620,0x6c00,0x4620,0x6c00},
{0x2640,0xc600,0x2640,0xc600},
{0x6220,0x1700,0x2230,0x0740},
{0x6440,0x0e20,0x44c0,0x8e00},
{0x0660,0x0660,0x0660,0x0660}
};
int blockType; //塊的模式號（0-6）
int turnState; //塊的翻轉狀態（0-3）
int blockState; //快的下落狀態
int row,col; //塊在畫布上的坐標
GameCanvas scr;
//塊類的構造方法
Block(GameCanvas scr){
this.scr = scr;
blockType = (int)(Math.random() * 1000)%7;
turnState = (int)(Math.random() * 1000)%4;
blockState = 1;
row = scr.getInitRow();
col = scr.getInitCol();
}
//重新初始化塊，並顯示新塊
public void reset(){
blockType = (int)(Math.random() * 1000)%7;
turnState = (int)(Math.random() * 1000)%4;
blockState = 1;
row = scr.getInitRow();
col = scr.getInitCol();
dispBlock(1);
}
//實現「塊」翻轉的方法
public void leftTurn(){
if(assertValid(blockType,(turnState + 1)%4,row,col)){
dispBlock(0);
turnState = (turnState + 1)%4;
dispBlock(1);
}
}
//實現「塊」的左移的方法
public void leftMove(){
if(assertValid(blockType,turnState,row,col-1)){
dispBlock(0);
col--;
dispBlock(1);
}
}
//實現塊的右移
public void rightMove(){
if(assertValid(blockType,turnState,row,col+1)){
dispBlock(0);
col++;
dispBlock(1);
}
}
//實現塊落下的操作的方法
public boolean fallDown(){
if(blockState == 2)
return(false);
if(assertValid(blockType,turnState,row-1,col)){
dispBlock(0);
row--;
dispBlock(1);
return(true);
}else{
blockState = 2;
dispBlock(2);
return(false);
}
}
//判斷是否正確的方法
boolean assertValid(int t,int s,int row,int col){
int k = 0x8000;
for(int i = 0; i < 4; i++){
for(int j = 0; j < 4; j++){
if((int)(pattern[t][s]&k) != 0){
int temp = scr.getScrArrXY(row-i,col+j);
if (temp<0||temp==2)
return false;
}
k = k >> 1;
}
}
return true;
}
//同步顯示的方法
public synchronized void dispBlock(int s){
int k = 0x8000;
for (int i = 0; i < 4; i++){
for(int j = 0; j < 4; j++){
if(((int)pattern[blockType][turnState]&k) != 0){
scr.drawUnit(row-i,col+j,s);
}
k=k>>1;
}
}
}
}
//定時線程
class MyTimer extends Thread{
GameCanvas scr;
public MyTimer(GameCanvas scr){
this.scr = scr;
}
public void run(){
while(true){
try{
sleep((10-ERS_Block.level + 1)*100);
}
catch(InterruptedException e){}
if(!scr.getBlock().fallDown()){
scr.deleteFullLine();
if(scr.isGameEnd()){
ERS_Block.isPlay = false;
suspend();
}else
scr.getBlock().reset();
}
}
}
class WinListener extends WindowAdapter{
public void windowClosing (WindowEvent l){
System.exit(0);
}
}
3. 這個是俄羅斯方塊中的j源代碼，用來表示方塊的個種形態的， 但這是如何表示的， 這些十六進制的數是什麼意
其實就是點陣圖
一個0x0000的4位16進制數換算成2進制有16位，理解為一個4*4的矩陣
0000
0000
0000
0000
拿長條形的四種狀態舉例
0x0f00 把4位16進制數按每位換算成一行4位2進制數的結果矩陣是
0000
1111
0000
0000
相應的0x4444是
0100
0100
0100
0100
將0看作空的，1看作方塊的塊，就可以看出正好是長條形在4*4空間中的橫豎切換（長條形雖然有四種朝向但其實是兩兩重復的）。
下面的以此類推，比如T型的第一種形態0x04e0就是
0000
0100
1110
0000
4. java的俄羅斯方塊代碼
俄羅斯方塊——java源代碼提供
import java.awt.*;
import java.awt.event.*;
//俄羅斯方塊類
public class ERS_Block extends Frame{
public static boolean isPlay=false;
public static int level=1,score=0;
public static TextField scoreField,levelField;
public static MyTimer timer;
GameCanvas gameScr;
public static void main(String[] argus){
ERS_Block ers = new ERS_Block("俄羅斯方塊游戲 V1.0 Author:Vincent");
WindowListener win_listener = new WinListener();
ers.addWindowListener(win_listener);
}
//俄羅斯方塊類的構造方法
ERS_Block(String title){
super(title);
setSize(600,480);
setLayout(new GridLayout(1,2));
gameScr = new GameCanvas();
gameScr.addKeyListener(gameScr);
timer = new MyTimer(gameScr);
timer.setDaemon(true);
timer.start();
timer.suspend();
add(gameScr);
Panel rightScr = new Panel();
rightScr.setLayout(new GridLayout(2,1,0,30));
rightScr.setSize(120,500);
add(rightScr);
//右邊信息窗體的布局
MyPanel infoScr = new MyPanel();
infoScr.setLayout(new GridLayout(4,1,0,5));
infoScr.setSize(120,300);
rightScr.add(infoScr);
//定義標簽和初始值
Label scorep = new Label("分數:",Label.LEFT);
Label levelp = new Label("級數:",Label.LEFT);
scoreField = new TextField(8);
levelField = new TextField(8);
scoreField.setEditable(false);
levelField.setEditable(false);
infoScr.add(scorep);
infoScr.add(scoreField);
infoScr.add(levelp);
infoScr.add(levelField);
scorep.setSize(new Dimension(20,60));
scoreField.setSize(new Dimension(20,60));
levelp.setSize(new Dimension(20,60));
levelField.setSize(new Dimension(20,60));
scoreField.setText("0");
levelField.setText("1");
//右邊控制按鈕窗體的布局
MyPanel controlScr = new MyPanel();
controlScr.setLayout(new GridLayout(5,1,0,5));
rightScr.add(controlScr);
//定義按鈕play
Button play_b = new Button("開始游戲");
play_b.setSize(new Dimension(50,200));
play_b.addActionListener(new Command(Command.button_play,gameScr));
//定義按鈕Level UP
Button level_up_b = new Button("提高級數");
level_up_b.setSize(new Dimension(50,200));
level_up_b.addActionListener(new Command(Command.button_levelup,gameScr));
//定義按鈕Level Down
Button level_down_b =new Button("降低級數");
level_down_b.setSize(new Dimension(50,200));
level_down_b.addActionListener(new Command(Command.button_leveldown,gameScr));
//定義按鈕Level Pause
Button pause_b =new Button("游戲暫停");
pause_b.setSize(new Dimension(50,200));
pause_b.addActionListener(new Command(Command.button_pause,gameScr));
//定義按鈕Quit
Button quit_b = new Button("退出遊戲");
quit_b.setSize(new Dimension(50,200));
quit_b.addActionListener(new Command(Command.button_quit,gameScr));
controlScr.add(play_b);
controlScr.add(level_up_b);
controlScr.add(level_down_b);
controlScr.add(pause_b);
controlScr.add(quit_b);
setVisible(true);
gameScr.requestFocus();
}
}
//重寫MyPanel類，使Panel的四周留空間
class MyPanel extends Panel{
public Insets getInsets(){
return new Insets(30,50,30,50);
}
}
//游戲畫布類
class GameCanvas extends Canvas implements KeyListener{
final int unitSize = 30; //小方塊邊長
int rowNum; //正方格的行數
int columnNum; //正方格的列數
int maxAllowRowNum; //允許有多少行未削
int blockInitRow; //新出現塊的起始行坐標
int blockInitCol; //新出現塊的起始列坐標
int [][] scrArr; //屏幕數組
Block b; //對方快的引用
//畫布類的構造方法
GameCanvas(){
rowNum = 15;
columnNum = 10;
maxAllowRowNum = rowNum - 2;
b = new Block(this);
blockInitRow = rowNum - 1;
blockInitCol = columnNum/2 - 2;
scrArr = new int [32][32];
}
//初始化屏幕，並將屏幕數組清零的方法
void initScr(){
for(int i=0;i<rowNum;i++)
for (int j=0; j<columnNum;j++)
scrArr[j]=0;
b.reset();
repaint();
}
//重新刷新畫布方法
public void paint(Graphics g){
for(int i = 0; i < rowNum; i++)
for(int j = 0; j < columnNum; j++)
drawUnit(i,j,scrArr[j]);
}
//畫方塊的方法
public void drawUnit(int row,int col,int type){
scrArr[row][col] = type;
Graphics g = getGraphics();
tch(type){ //表示畫方快的方法
case 0: g.setColor(Color.black);break; //以背景為顏色畫
case 1: g.setColor(Color.blue);break; //畫正在下落的方塊
case 2: g.setColor(Color.magenta);break; //畫已經落下的方法
}
g.fill3DRect(col*unitSize,getSize().height-(row+1)*unitSize,unitSize,unitSize,true);
g.dispose();
}
public Block getBlock(){
return b; //返回block實例的引用
}
//返回屏幕數組中(row,col)位置的屬性值
public int getScrArrXY(int row,int col){
if (row < 0 || row >= rowNum || col < 0 || col >= columnNum)
return(-1);
else
return(scrArr[row][col]);
}
//返回新塊的初始行坐標方法
public int getInitRow(){
return(blockInitRow); //返回新塊的初始行坐標
}
//返回新塊的初始列坐標方法
public int getInitCol(){
return(blockInitCol); //返回新塊的初始列坐標
}
//滿行刪除方法
void deleteFullLine(){
int full_line_num = 0;
int k = 0;
for (int i=0;i<rowNum;i++){
boolean isfull = true;
L1:for(int j=0;j<columnNum;j++)
if(scrArr[j] == 0){
k++;
isfull = false;
break L1;
}
if(isfull) full_line_num++;
if(k!=0 && k-1!=i && !isfull)
for(int j = 0; j < columnNum; j++){
if (scrArr[j] == 0)
drawUnit(k-1,j,0);
else
drawUnit(k-1,j,2);
scrArr[k-1][j] = scrArr[j];
}
}
for(int i = k-1 ;i < rowNum; i++){
for(int j = 0; j < columnNum; j++){
drawUnit(i,j,0);
scrArr[j]=0;
}
}
ERS_Block.score += full_line_num;
ERS_Block.scoreField.setText(""+ERS_Block.score);
}
//判斷游戲是否結束方法
boolean isGameEnd(){
for (int col = 0 ; col <columnNum; col ++){
if(scrArr[maxAllowRowNum][col] !=0)
return true;
}
return false;
}
public void keyTyped(KeyEvent e){
}
public void keyReleased(KeyEvent e){
}
//處理鍵盤輸入的方法
public void keyPressed(KeyEvent e){
if(!ERS_Block.isPlay)
return;
tch(e.getKeyCode()){
case KeyEvent.VK_DOWN:b.fallDown();break;
case KeyEvent.VK_LEFT:b.leftMove();break;
case KeyEvent.VK_RIGHT:b.rightMove();break;
case KeyEvent.VK_SPACE:b.leftTurn();break;
}
}
}
//處理控制類
class Command implements ActionListener{
static final int button_play = 1; //給按鈕分配編號
static final int button_levelup = 2;
static final int button_leveldown = 3;
static final int button_quit = 4;
static final int button_pause = 5;
static boolean pause_resume = true;
int curButton; //當前按鈕
GameCanvas scr;
//控制按鈕類的構造方法
Command(int button,GameCanvas scr){
curButton = button;
this.scr=scr;
}
//按鈕執行方法
public void actionPerformed (ActionEvent e){
tch(curButton){
case button_play:if(!ERS_Block.isPlay){
scr.initScr();
ERS_Block.isPlay = true;
ERS_Block.score = 0;
ERS_Block.scoreField.setText("0");
ERS_Block.timer.resume();
}
scr.requestFocus();
break;
case button_levelup:if(ERS_Block.level < 10){
ERS_Block.level++;
ERS_Block.levelField.setText(""+ERS_Block.level);
ERS_Block.score = 0;
ERS_Block.scoreField.setText(""+ERS_Block.score);
}
scr.requestFocus();
break;
case button_leveldown:if(ERS_Block.level > 1){
ERS_Block.level--;
ERS_Block.levelField.setText(""+ERS_Block.level);
ERS_Block.score = 0;
ERS_Block.scoreField.setText(""+ERS_Block.score);
}
scr.requestFocus();
break;
case button_pause:if(pause_resume){
ERS_Block.timer.suspend();
pause_resume = false;
}else{
ERS_Block.timer.resume();
pause_resume = true;
}
scr.requestFocus();
break;
case button_quit:System.exit(0);
}
}
}
//方塊類
class Block {
static int[][] pattern = {
{0x0f00,0x4444,0x0f00,0x4444},//用十六進至表示，本行表示長條四種狀態
{0x04e0,0x0464,0x00e4,0x04c4},
{0x4620,0x6c00,0x4620,0x6c00},
{0x2640,0xc600,0x2640,0xc600},
{0x6220,0x1700,0x2230,0x0740},
{0x6440,0x0e20,0x44c0,0x8e00},
{0x0660,0x0660,0x0660,0x0660}
};
int blockType; //塊的模式號（0-6）
int turnState; //塊的翻轉狀態（0-3）
int blockState; //快的下落狀態
int row,col; //塊在畫布上的坐標
GameCanvas scr;
//塊類的構造方法
Block(GameCanvas scr){
this.scr = scr;
blockType = (int)(Math.random() * 1000)%7;
turnState = (int)(Math.random() * 1000)%4;
blockState = 1;
row = scr.getInitRow();
col = scr.getInitCol();
}
//重新初始化塊，並顯示新塊
public void reset(){
blockType = (int)(Math.random() * 1000)%7;
turnState = (int)(Math.random() * 1000)%4;
blockState = 1;
row = scr.getInitRow();
col = scr.getInitCol();
dispBlock(1);
}
//實現「塊」翻轉的方法
public void leftTurn(){
if(assertValid(blockType,(turnState + 1)%4,row,col)){
dispBlock(0);
turnState = (turnState + 1)%4;
dispBlock(1);
}
}
//實現「塊」的左移的方法
public void leftMove(){
if(assertValid(blockType,turnState,row,col-1)){
dispBlock(0);
col--;
dispBlock(1);
}
}
//實現塊的右移
public void rightMove(){
if(assertValid(blockType,turnState,row,col+1)){
dispBlock(0);
col++;
dispBlock(1);
}
}
//實現塊落下的操作的方法
public boolean fallDown(){
if(blockState == 2)
return(false);
if(assertValid(blockType,turnState,row-1,col)){
dispBlock(0);
row--;
dispBlock(1);
return(true);
}else{
blockState = 2;
dispBlock(2);
return(false);
}
}
//判斷是否正確的方法
boolean assertValid(int t,int s,int row,int col){
int k = 0x8000;
for(int i = 0; i < 4; i++){
for(int j = 0; j < 4; j++){
if((int)(pattern[t][s]&k) != 0){
int temp = scr.getScrArrXY(row-i,col+j);
if (temp<0||temp==2)
return false;
}
k = k >> 1;
}
}
return true;
}
//同步顯示的方法
public synchronized void dispBlock(int s){
int k = 0x8000;
for (int i = 0; i < 4; i++){
for(int j = 0; j < 4; j++){
if(((int)pattern[blockType][turnState]&k) != 0){
scr.drawUnit(row-i,col+j,s);
}
k=k>>1;
}
}
}
}
//定時線程
class MyTimer extends Thread{
GameCanvas scr;
public MyTimer(GameCanvas scr){
this.scr = scr;
}
public void run(){
while(true){
try{
sleep((10-ERS_Block.level + 1)*100);
}
catch(InterruptedException e){}
if(!scr.getBlock().fallDown()){
scr.deleteFullLine();
if(scr.isGameEnd()){
ERS_Block.isPlay = false;
suspend();
}else
scr.getBlock().reset();
}
}
}
}
class WinListener extends WindowAdapter{
public void windowClosing (WindowEvent l){
System.exit(0);
}
}
5. 求C語言俄羅斯方塊代碼
俄羅斯方塊C源代碼
#include<stdio.h>
#include<windows.h>
#include<conio.h>
#include<time.h>
#defineZL4 //坐標增量,不使游戲窗口靠邊
#defineWID36 //游戲窗口的寬度
#defineHEI20 //游戲窗口的高度
inti,j,Ta,Tb,Tc; //Ta,Tb,Tc用於記住和轉換方塊變數的值
inta[60][60]={0}; //標記游戲屏幕各坐標點：0,1,2分別為空、方塊、邊框
intb[4]; //標記4個"口"方塊：1有，0無，類似開關
intx,y,level,score,speed; //方塊中心位置的x,y坐標，游戲等級、得分和游戲速度
intflag,next; //當前要操作的方塊類型序號，下一個方塊類型序號
voidgtxy(intm,intn); //以下聲明要用到的自編函數
voidgflag(); //獲得下一方塊序號
voidcsh(); //初始化界面
voidstart(); //開始部分
voidprfk(); //列印方塊
voidclfk(); //清除方塊
voidmkfk(); //製作方塊
voidkeyD(); //按鍵操作
intifmov(); //判斷方塊能否移動或變體
void clHA(); //清除滿行的方塊
voidclNEXT(); //清除邊框外的NEXT方塊
intmain()
{csh();
while(1)
{start();//開始部分
while(1)
{prfk();
Sleep(speed); //延時
clfk();
Tb=x;Tc=flag;//臨存當前x坐標和序號，以備撤銷操作
keyD();
y++;//方塊向下移動
if(ifmov()==0){y--;prfk();dlHA();break;}//不可動放下,刪行,跨出循環
}
for(i=y-2;i<y+2;i++){if(i==ZL){j=0;}} //方塊觸到框頂
if(j==0){system("cls");gtxy(10,10);printf("游戲結束！");getch();break;}
clNEXT(); //清除框外的NEXT方塊
}
return0;
}
voidgtxy(intm,intn)//控制游標移動
{COORDpos;//定義變數
pos.X=m;//橫坐標
pos.Y=n;//縱坐標
SetConsoleCursorPosition(GetStdHandle(STD_OUTPUT_HANDLE),pos);
}
voidcsh()//初始化界面
{gtxy(ZL+WID/2-5,ZL-2);printf("俄羅斯方塊");//列印游戲名稱
gtxy(ZL+WID+3,ZL+7);printf("*******NEXT：");//列印菜單信息
gtxy(ZL+WID+3,ZL+13);printf("**********");
gtxy(ZL+WID+3,ZL+15);printf("Esc：退出遊戲");
gtxy(ZL+WID+3,ZL+17);printf("↑鍵：變體");
gtxy(ZL+WID+3,ZL+19);printf("空格：暫停游戲");
gtxy(ZL,ZL);printf("╔");gtxy(ZL+WID-2,ZL);printf("╗");//列印框角
gtxy(ZL,ZL+HEI);printf("╚");gtxy(ZL+WID-2,ZL+HEI);printf("╝");
a[ZL][ZL+HEI]=2;a[ZL+WID-2][ZL+HEI]=2;//記住有圖案
for(i=2;i<WID-2;i+=2){gtxy(ZL+i,ZL);printf("═");}//列印上橫框
for(i=2;i<WID-2;i+=2){gtxy(ZL+i,ZL+HEI);printf("═");a[ZL+i][ZL+HEI]=2;}//下框
for(i=1;i<HEI;i++){gtxy(ZL,ZL+i);printf("║");a[ZL][ZL+i]=2;}//左豎框記住有圖案
for(i=1;i<HEI;i++){gtxy(ZL+WID-2,ZL+i);printf("║");a[ZL+WID-2][ZL+i]=2;}//右框
CONSOLE_CURSOR_INFOcursor_info={1,0};//以下是隱藏游標的設置
SetConsoleCursorInfo(GetStdHandle(STD_OUTPUT_HANDLE),&cursor_info);
level=1;score=0;speed=400;
gflag();flag=next;//獲得一個當前方塊序號
}
voidgflag() //獲得下一個方塊的序號
{srand((unsigned)time(NULL));next=rand()%19+1; }
voidstart()//開始部分
{gflag();Ta=flag;flag=next;//保存當前方塊序號，將下一方塊序號臨時操作
x=ZL+WID+6;y=ZL+10;prfk();//給x,y賦值，在框外列印出下一方塊
flag=Ta;x=ZL+WID/2;y=ZL-1;//取回當前方塊序號，並給x,y賦值
}
voidprfk()//列印俄羅斯方塊
{for(i=0;i<4;i++){b[i]=1;}//數組b[4]每個元素的值都為1
mkfk();//製作俄羅斯方塊
for(i=x-2;i<=x+4;i+=2)//列印方塊
{for(j=y-2;j<=y+1;j++){if(a[i][j]==1&&j>ZL){gtxy(i,j);printf("□");}}}
gtxy(ZL+WID+3,ZL+1); printf("level:%d",level); //以下列印菜單信息
gtxy(ZL+WID+3,ZL+3); printf("score:%d",score);
gtxy(ZL+WID+3,ZL+5); printf("speed:%d",speed);
}
voidclfk()//清除俄羅斯方塊
{for(i=0;i<4;i++){b[i]=0;}//數組b[4]每個元素的值都為0
mkfk();//製作俄羅斯方塊
for(i=x-2;i<=x+4;i+=2)//清除方塊
{for(j=y-2;j<=y+1;j++){if(a[i][j]==0&&j>ZL){gtxy(i,j);printf("");}}}
}
voidmkfk()//製作俄羅斯方塊
{a[x][y]=b[0];//方塊中心位置狀態:1-有,0-無
switch(flag)//共6大類，19種小類型
{case1:{a[x][y-1]=b[1];a[x+2][y-1]=b[2];a[x+2][y]=b[3];break;}//田字方塊
case2:{a[x-2][y]=b[1];a[x+2][y]=b[2];a[x+4][y]=b[3];break;}//直線方塊:----
case3:{a[x][y-1]=b[1];a[x][y-2]=b[2];a[x][y+1]=b[3];break;}//直線方塊:|
case4:{a[x-2][y]=b[1];a[x+2][y]=b[2];a[x][y+1]=b[3];break;}//T字方塊
case5:{a[x][y-1]=b[1];a[x][y+1]=b[2];a[x-2][y]=b[3];break;}//T字順時針轉90度
case6:{a[x][y-1]=b[1];a[x-2][y]=b[2];a[x+2][y]=b[3];break;}//T字順轉180度
case7:{a[x][y-1]=b[1];a[x][y+1]=b[2];a[x+2][y]=b[3];break;}//T字順轉270度
case8:{a[x][y+1]=b[1];a[x-2][y]=b[2];a[x+2][y+1]=b[3];break;}//Z字方塊
case9:{a[x][y-1]=b[1];a[x-2][y]=b[2];a[x-2][y+1]=b[3];break;}//Z字順轉90度
case10:{a[x][y-1]=b[1];a[x-2][y-1]=b[2];a[x+2][y]=b[3];break;}//Z字順轉180度
case11:{a[x][y+1]=b[1];a[x+2][y-1]=b[2];a[x+2][y]=b[3];break;}//Z字順轉270度
case12:{a[x][y-1]=b[1];a[x][y+1]=b[2];a[x-2][y-1]=b[3];break;}//7字方塊
case13:{a[x-2][y]=b[1];a[x+2][y-1]=b[2];a[x+2][y]=b[3];break;}//7字順轉90度
case14:{a[x][y-1]=b[1];a[x][y+1]=b[2];a[x+2][y+1]=b[3];break;}//7字順轉180度
case15:{a[x-2][y]=b[1];a[x-2][y+1]=b[2];a[x+2][y]=b[3];break;}//7字順轉270度
case16:{a[x][y+1]=b[1];a[x][y-1]=b[2];a[x+2][y-1]=b[3];break;}//倒7字方塊
case17:{a[x-2][y]=b[1];a[x+2][y+1]=b[2];a[x+2][y]=b[3];break;}//倒7字順轉90度
case18:{a[x][y-1]=b[1];a[x][y+1]=b[2];a[x-2][y+1]=b[3];break;}//倒7字順轉180度
case19:{a[x-2][y]=b[1];a[x-2][y-1]=b[2];a[x+2][y]=b[3];break;}//倒7字順轉270度
}
}
voidkeyD()//按鍵操作
{if(kbhit())
{intkey;
key=getch();
if(key==224)
{key=getch();
if(key==75){x-=2;}//按下左方向鍵，中心橫坐標減2
if(key==77){x+=2;}//按下右方向鍵，中心橫坐標加2
if(key==72)//按下向上方向鍵,方塊變體
{if(flag>=2&&flag<=3){flag++;flag%=2;flag+=2;}
if(flag>=4&&flag<=7){flag++;flag%=4;flag+=4;}
if(flag>=8&&flag<=11){flag++;flag%=4;flag+=8;}
if(flag>=12&&flag<=15){flag++;flag%=4;flag+=12;}
if(flag>=16&&flag<=19){flag++;flag%=4;flag+=16;}}
}
if(key==32)//按空格鍵，暫停
{prfk();while(1){if(getch()==32){clfk();break;}}} //再按空格鍵，繼續游戲
if(ifmov()==0){x=Tb;flag=Tc;} //如果不可動，撤銷上面操作
else{prfk();Sleep(speed);clfk();Tb=x;Tc=flag;} //如果可動，執行操作
}
}
intifmov()//判斷能否移動
{if(a[x][y]!=0){return0;}//方塊中心處有圖案返回0，不可移動
else{if((flag==1&&(a[x][y-1]==0&&a[x+2][y-1]==0&&a[x+2][y]==0))||
(flag==2&&(a[x-2][y]==0&&a[x+2][y]==0&&a[x+4][y]==0))||
(flag==3&&(a[x][y-1]==0&&a[x][y-2]==0&&a[x][y+1]==0))||
(flag==4&&(a[x-2][y]==0&&a[x+2][y]==0&&a[x][y+1]==0))||
(flag==5&&(a[x][y-1]==0&&a[x][y+1]==0&&a[x-2][y]==0))||
(flag==6&&(a[x][y-1]==0&&a[x-2][y]==0&&a[x+2][y]==0))||
(flag==7&&(a[x][y-1]==0&&a[x][y+1]==0&&a[x+2][y]==0))||
(flag==8&&(a[x][y+1]==0&&a[x-2][y]==0&&a[x+2][y+1]==0))||
(flag==9&&(a[x][y-1]==0&&a[x-2][y]==0&&a[x-2][y+1]==0))||
(flag==10&&(a[x][y-1]==0&&a[x-2][y-1]==0&&a[x+2][y]==0))||
(flag==11&&(a[x][y+1]==0&&a[x+2][y-1]==0&&a[x+2][y]==0))||
(flag==12&&(a[x][y-1]==0&&a[x][y+1]==0&&a[x-2][y-1]==0))||
( flag==13 && ( a[x-2][y]==0 && a[x+2][y-1]==0 && a[x+2][y]==0 ) ) ||
( flag==14 && ( a[x][y-1]==0 && a[x][y+1]==0 && a[x+2][y+1]==0 ) ) ||
(flag==15 && ( a[x-2][y]==0 && a[x-2][y+1]==0 && a[x+2][y]==0 ) ) ||
(flag==16 && ( a[x][y+1]==0 && a[x][y-1]==0 && a[x+2][y-1]==0 ) ) ||
( flag==17 && ( a[x-2][y]==0 && a[x+2][y+1]==0 && a[x+2][y]==0 ) ) ||
(flag==18 && ( a[x][y-1]==0 &&a[x][y+1]==0 && a[x-2][y+1]==0 ) ) ||
(flag==19 && ( a[x-2][y]==0 && a[x-2][y-1]==0
&&a[x+2][y]==0))){return1;}
}
return0; //其它情況返回0
}
voidclNEXT() //清除框外的NEXT方塊
{flag=next;x=ZL+WID+6;y=ZL+10;clfk();}
void clHA() //清除滿行的方塊
{intk,Hang=0; //k是某行方塊個數,Hang是刪除的方塊行數
for(j=ZL+HEI-1;j>=ZL+1;j--)//當某行有WID/2-2個方塊時，則為滿行
{k=0;for(i=ZL+2;i<ZL+WID-2;i+=2)
{if(a[i][j]==1)//豎坐標從下往上，橫坐標由左至右依次判斷是否滿行
{k++; //下面將操作刪除行
if(k==WID/2-2) { for(k=ZL+2;k<ZL+WID-2;k+=2)
{a[k][j]=0;gtxy(k,j);printf("");Sleep(1);}
for(k=j-1;k>ZL;k--)
{for(i=ZL+2;i<ZL+WID-2;i+=2)//已刪行數上面有方塊，先清除再全部下移一行
{if(a[i][k]==1){a[i][k]=0;gtxy(i,k);printf("");a[i][k+1]=1;
gtxy(i,k+1);printf("□");}}
}
j++;//方塊下移後，重新判斷刪除行是否滿行
Hang++;//記錄刪除方塊的行數
}
}
}
}
score+=100*Hang; //每刪除一行，得100分
if(Hang>0&&(score%500==0||score/500>level-1)) //得分滿500速度加快升一級
{speed-=20;level++;if(speed<200)speed+=20; }
}
6. 有沒有Android版的 2048(俄羅斯方塊版本、消消樂版本) 游戲的源代碼
你到CSDN上邊查一下，一大把，都是源碼。
7. 求俄羅斯方塊（Dev c++/Free pascal）源代碼
FP就可以用啦、望採納！！
USES Crt;
CONST
Change:Array [0..6,0..3,0..7] Of Byte =(((0,1,1,1,2,1,3,1),(1,0,1,1,1,2,1,3),(0,1,1,1,2,1,3,1),(1,0,1,1,1,2,1,3)),
((1,0,0,1,1,1,2,1),(1,0,1,1,1,2,2,1),(0,1,1,1,2,1,1,2),(1,0,0,1,1,1,1,2)),
((1,0,2,0,1,1,2,1),(1,0,2,0,1,1,2,1),(1,0,2,0,1,1,2,1),(1,0,2,0,1,1,2,1)),
((1,0,2,0,0,1,1,1),(0,0,0,1,1,1,1,2),(1,0,2,0,0,1,1,1),(0,0,0,1,1,1,1,2)),
((0,0,1,0,1,1,2,1),(1,0,0,1,1,1,0,2),(0,0,1,0,1,1,2,1),(1,0,0,1,1,1,0,2)),
((1,0,2,0,1,1,1,2),(0,0,0,1,1,1,2,1),(1,0,0,2,1,1,1,2),(2,2,0,1,1,1,2,1)),
((0,0,1,0,1,1,1,2),(2,0,0,1,1,1,2,1),(2,2,1,0,1,1,1,2),(0,2,0,1,1,1,2,1)));
VAR
Board:Array [0..3,0..11,1..25] Of Byte;
Players,N,Nowx,Nowy,Kind,Trans,Speed:Byte;
Time,Score:Word;
Now:Array [0..7] Of Byte;
PROCEDURE Furbish;
VAR B,C:Byte;
Begin
For C:=24 Downto 2 Do Begin
Gotoxy(1,C);
For B:=1 To 10 Do
If Board[0,B,C]=0 Then Write(' ')
Else Write('壙');
End;
End;
PROCEDURE Clear;
Var A,B,C:Byte;D:Boolean;
Begin
For A:=24 Downto 1 Do
Begin
D:=True;
For B:=1 To 10 Do
If Board[0,B,A]=0 Then D:=False;
If D=True Then
Begin
Score:=Score+10;Gotoxy(1,1);Write(Score:5,'0');
For C:=A Downto 2 Do
For B:=1 To 10 Do
Board[0,B,C]:=Board[0,B,C-1];
A:=A+1;
End;
End;
Furbish;
End;
FUNCTION Canmove(X,Y:Byte):Boolean;
BEGIN
Canmove:=True;
If Board[0,X+Now[0],Y+Now[1]]>0 Then Canmove:=False;
If Board[0,X+Now[2],Y+Now[3]]>0 Then Canmove:=False;
If Board[0,X+Now[4],Y+Now[5]]>0 Then Canmove:=False;
If Board[0,X+Now[6],Y+Now[7]]>0 Then Canmove:=False;
End;
PROCEDURE Clean;
Begin
Gotoxy((Nowx+Now[0])*2-1,Nowy+Now[1]);Write(' ');
Gotoxy((Nowx+Now[2])*2-1,Nowy+Now[3]);Write(' ');
Gotoxy((Nowx+Now[4])*2-1,Nowy+Now[5]);Write(' ');
Gotoxy((Nowx+Now[6])*2-1,Nowy+Now[7]);Write(' ');
End;
PROCEDURE Show;
Begin
Gotoxy((Nowx+Now[0])*2-1,Nowy+Now[1]);Write('壙');
Gotoxy((Nowx+Now[2])*2-1,Nowy+Now[3]);Write('壙');
Gotoxy((Nowx+Now[4])*2-1,Nowy+Now[5]);Write('壙');
Gotoxy((Nowx+Now[6])*2-1,Nowy+Now[7]);Write('壙');
End;
BEGIN
Fillchar(Board,Sizeof(Board),0);
Randomize;Score:=0;
For N:=1 To 24 Do
Board[0,0,N]:=1;
For N:=1 To 24 Do
Board[0,11,N]:=1;
For N:=1 To 10 Do
Board[0,N,25]:=1;
Window(31,2,50,25);Textcolor(White);Textbackground(Blue);
Clrscr;Window(31,2,51,25);
Speed:=1;
Kind:=Random(7);Trans:=Random(4);Nowx:=4;Nowy:=1;
For N:=0 To 7 Do
Now[N]:=Change[Kind,Trans,N];
While Canmove(Nowx,Nowy) Do
Begin
Repeat
Clean;Nowy:=Nowy+1;Show;
Repeat
If Keypressed Then
Case Upcase(Readkey) Of
#0:Case Readkey Of
#75:If Canmove(Nowx-1,Nowy) Then Begin Clean;Nowx:=Nowx-1;Show;End;
#77:If Canmove(Nowx+1,Nowy) Then Begin Clean;Nowx:=Nowx+1;Show;End;
#80:Begin Clean;Repeat
If Canmove(Nowx,Nowy+1) Then Nowy:=Nowy+1;
Until Not(Canmove(Nowx,Nowy+1));Show;End;
#61:Begin Gotoxy(9,12);Write('Pause');Repeat Delay(1000);Until Keypressed;Furbish;End;
End;
#27:Exit;
' ',#13:Begin
Clean;Trans:=Trans+1;
If Trans=4 Then Trans:=0;
For N:=0 To 7 Do
Now[N]:=Change[Kind,Trans,N];
If Not(Canmove(Nowx,Nowy)) Then Begin Trans:=Trans-1;For N:=0 To 7 Do
Now[N]:=Change[Kind,Trans,N];Show;End
Else Show;
End;
End;
Until Not(Keypressed);
Delay((10-Speed)*50);
Until Not(Canmove(Nowx,Nowy+1));
Score:=Score+1;Gotoxy(1,1);Write(Score:5,'0');Speed:=(Score Div 300)+1;
Board[0,Nowx+Now[0],Nowy+Now[1]]:=1;
Board[0,Nowx+Now[2],Nowy+Now[3]]:=1;
Board[0,Nowx+Now[4],Nowy+Now[5]]:=1;
Board[0,Nowx+Now[6],Nowy+Now[7]]:=1;
Clear;
Kind:=Random(7);Trans:=Random(4);Nowx:=4;Nowy:=1;
For N:=0 To 7 Do
Now[N]:=Change[Kind,Trans,N];
End;
Gotoxy(7,12);Write('GAME OVER');Readln;
END.
8. 求用JAVA編寫俄羅斯方塊游戲的源代碼
俄羅斯方塊——java源代碼提供 import java.awt.*; import java.awt.event.*; //俄羅斯方塊類 public class ERS_Block extends Frame{ public static boolean isPlay=false; public static int level=1,score=0; public static TextField scoreField,levelField; public static MyTimer timer; GameCanvas gameScr; public static void main(String[] argus){ ERS_Block ers = new ERS_Block("俄羅斯方塊游戲 V1.0 Author:Vincent"); WindowListener win_listener = new WinListener(); ers.addWindowListener(win_listener); } //俄羅斯方塊類的構造方法 ERS_Block(String title){ super(title); setSize(600,480); setLayout(new GridLayout(1,2)); gameScr = new GameCanvas(); gameScr.addKeyListener(gameScr); timer = new MyTimer(gameScr); timer.setDaemon(true); timer.start(); timer.suspend(); add(gameScr); Panel rightScr = new Panel(); rightScr.setLayout(new GridLayout(2,1,0,30)); rightScr.setSize(120,500); add(rightScr); //右邊信息窗體的布局 MyPanel infoScr = new MyPanel(); infoScr.setLayout(new GridLayout(4,1,0,5)); infoScr.setSize(120,300); rightScr.add(infoScr); //定義標簽和初始值 Label scorep = new Label("分數:",Label.LEFT); Label levelp = new Label("級數:",Label.LEFT); scoreField = new TextField(8); levelField = new TextField(8); scoreField.setEditable(false); levelField.setEditable(false); infoScr.add(scorep); infoScr.add(scoreField); infoScr.add(levelp); infoScr.add(levelField); scorep.setSize(new Dimension(20,60)); scoreField.setSize(new Dimension(20,60)); levelp.setSize(new Dimension(20,60)); levelField.setSize(new Dimension(20,60)); scoreField.setText("0"); levelField.setText("1"); //右邊控制按鈕窗體的布局 MyPanel controlScr = new MyPanel(); controlScr.setLayout(new GridLayout(5,1,0,5)); rightScr.add(controlScr); //定義按鈕play Button play_b = new Button("開始游戲"); play_b.setSize(new Dimension(50,200)); play_b.addActionListener(new Command(Command.button_play,gameScr)); //定義按鈕Level UP Button level_up_b = new Button("提高級數"); level_up_b.setSize(new Dimension(50,200)); level_up_b.addActionListener(new Command(Command.button_levelup,gameScr)); //定義按鈕Level Down Button level_down_b =new Button("降低級數"); level_down_b.setSize(new Dimension(50,200)); level_down_b.addActionListener(new Command(Command.button_leveldown,gameScr)); //定義按鈕Level Pause Button pause_b =new Button("游戲暫停"); pause_b.setSize(new Dimension(50,200)); pause_b.addActionListener(new Command(Command.button_pause,gameScr)); //定義按鈕Quit Button quit_b = new Button("退出遊戲"); quit_b.setSize(new Dimension(50,200)); quit_b.addActionListener(new Command(Command.button_quit,gameScr)); controlScr.add(play_b); controlScr.add(level_up_b); controlScr.add(level_down_b); controlScr.add(pause_b); controlScr.add(quit_b); setVisible(true); gameScr.requestFocus(); } } //重寫MyPanel類，使Panel的四周留空間 class MyPanel extends Panel{ public Insets getInsets(){ return new Insets(30,50,30,50); } } //游戲畫布類 class GameCanvas extends Canvas implements KeyListener{ final int unitSize = 30; //小方塊邊長 int rowNum; //正方格的行數 int columnNum; //正方格的列數 int maxAllowRowNum; //允許有多少行未削 int blockInitRow; //新出現塊的起始行坐標 int blockInitCol; //新出現塊的起始列坐標 int [][] scrArr; //屏幕數組 Block b; //對方快的引用 //畫布類的構造方法 GameCanvas(){ rowNum = 15; columnNum = 10; maxAllowRowNum = rowNum - 2; b = new Block(this); blockInitRow = rowNum - 1; blockInitCol = columnNum/2 - 2; scrArr = new int [32][32]; } //初始化屏幕，並將屏幕數組清零的方法 void initScr(){ for(int i=0;i<rowNum;i++) for (int j=0; j<columnNum;j++) scrArr[j]=0; b.reset(); repaint(); } //重新刷新畫布方法 public void paint(Graphics g){ for(int i = 0; i < rowNum; i++) for(int j = 0; j < columnNum; j++) drawUnit(i,j,scrArr[j]); } //畫方塊的方法 public void drawUnit(int row,int col,int type){ scrArr[row][col] = type; Graphics g = getGraphics(); tch(type){ //表示畫方快的方法 case 0: g.setColor(Color.black);break; //以背景為顏色畫 case 1: g.setColor(Color.blue);break; //畫正在下落的方塊 case 2: g.setColor(Color.magenta);break; //畫已經落下的方法 } g.fill3DRect(col*unitSize,getSize().height-(row+1)*unitSize,unitSize,unitSize,true); g.dispose(); } public Block getBlock(){ return b; //返回block實例的引用 } //返回屏幕數組中(row,col)位置的屬性值 public int getScrArrXY(int row,int col){ if (row < 0 || row >= rowNum || col < 0 || col >= columnNum) return(-1); else return(scrArr[row][col]); } //返回新塊的初始行坐標方法 public int getInitRow(){ return(blockInitRow); //返回新塊的初始行坐標 } //返回新塊的初始列坐標方法 public int getInitCol(){ return(blockInitCol); //返回新塊的初始列坐標 } //滿行刪除方法 void deleteFullLine(){ int full_line_num = 0; int k = 0; for (int i=0;i<rowNum;i++){ boolean isfull = true; L1:for(int j=0;j<columnNum;j++) if(scrArr[j] == 0){ k++; isfull = false; break L1; } if(isfull) full_line_num++; if(k!=0 && k-1!=i && !isfull) for(int j = 0; j < columnNum; j++){ if (scrArr[j] == 0) drawUnit(k-1,j,0); else drawUnit(k-1,j,2); scrArr[k-1][j] = scrArr[j]; } } for(int i = k-1 ;i < rowNum; i++){ for(int j = 0; j < columnNum; j++){ drawUnit(i,j,0); scrArr[j]=0; } } ERS_Block.score += full_line_num; ERS_Block.scoreField.setText(""+ERS_Block.score); } //判斷游戲是否結束方法 boolean isGameEnd(){ for (int col = 0 ; col <columnNum; col ++){ if(scrArr[maxAllowRowNum][col] !=0) return true; } return false; } public void keyTyped(KeyEvent e){ } public void keyReleased(KeyEvent e){ } //處理鍵盤輸入的方法 public void keyPressed(KeyEvent e){ if(!ERS_Block.isPlay) return; tch(e.getKeyCode()){ case KeyEvent.VK_DOWN:b.fallDown();break; case KeyEvent.VK_LEFT:b.leftMove();break; case KeyEvent.VK_RIGHT:b.rightMove();break; case KeyEvent.VK_SPACE:b.leftTurn();break; } } } //處理控制類 class Command implements ActionListener{ static final int button_play = 1; //給按鈕分配編號 static final int button_levelup = 2; static final int button_leveldown = 3; static final int button_quit = 4; static final int button_pause = 5; static boolean pause_resume = true; int curButton; //當前按鈕 GameCanvas scr; //控制按鈕類的構造方法 Command(int button,GameCanvas scr){ curButton = button; this.scr=scr; } //按鈕執行方法 public void actionPerformed (ActionEvent e){ tch(curButton){ case button_play:if(!ERS_Block.isPlay){ scr.initScr(); ERS_Block.isPlay = true; ERS_Block.score = 0; ERS_Block.scoreField.setText("0"); ERS_Block.timer.resume(); } scr.requestFocus(); break; case button_levelup:if(ERS_Block.level < 10){ ERS_Block.level++; ERS_Block.levelField.setText(""+ERS_Block.level); ERS_Block.score = 0; ERS_Block.scoreField.setText(""+ERS_Block.score); } scr.requestFocus(); break; case button_leveldown:if(ERS_Block.level > 1){ ERS_Block.level--; ERS_Block.levelField.setText(""+ERS_Block.level); ERS_Block.score = 0; ERS_Block.scoreField.setText(""+ERS_Block.score); } scr.requestFocus(); break; case button_pause:if(pause_resume){ ERS_Block.timer.suspend(); pause_resume = false; }else{ ERS_Block.timer.resume(); pause_resume = true; } scr.requestFocus(); break; case button_quit:System.exit(0); } } } //方塊類 class Block { static int[][] pattern = { {0x0f00,0x4444,0x0f00,0x4444},//用十六進至表示，本行表示長條四種狀態 {0x04e0,0x0464,0x00e4,0x04c4}, {0x4620,0x6c00,0x4620,0x6c00}, {0x2640,0xc600,0x2640,0xc600}, {0x6220,0x1700,0x2230,0x0740}, {0x6440,0x0e20,0x44c0,0x8e00}, {0x0660,0x0660,0x0660,0x0660} }; int blockType; //塊的模式號（0-6） int turnState; //塊的翻轉狀態（0-3） int blockState; //快的下落狀態 int row,col; //塊在畫布上的坐標 GameCanvas scr; //塊類的構造方法 Block(GameCanvas scr){ this.scr = scr; blockType = (int)(Math.random() * 1000)%7; turnState = (int)(Math.random() * 1000)%4; blockState = 1; row = scr.getInitRow(); col = scr.getInitCol(); } //重新初始化塊，並顯示新塊 public void reset(){ blockType = (int)(Math.random() * 1000)%7; turnState = (int)(Math.random() * 1000)%4; blockState = 1; row = scr.getInitRow(); col = scr.getInitCol(); dispBlock(1); } //實現「塊」翻轉的方法 public void leftTurn(){ if(assertValid(blockType,(turnState + 1)%4,row,col)){ dispBlock(0); turnState = (turnState + 1)%4; dispBlock(1); } } //實現「塊」的左移的方法 public void leftMove(){ if(assertValid(blockType,turnState,row,col-1)){ dispBlock(0); col--; dispBlock(1); } } //實現塊的右移 public void rightMove(){ if(assertValid(blockType,turnState,row,col+1)){ dispBlock(0); col++; dispBlock(1); } } //實現塊落下的操作的方法 public boolean fallDown(){ if(blockState == 2) return(false); if(assertValid(blockType,turnState,row-1,col)){ dispBlock(0); row--; dispBlock(1); return(true); }else{ blockState = 2; dispBlock(2); return(false); } } //判斷是否正確的方法 boolean assertValid(int t,int s,int row,int col){ int k = 0x8000; for(int i = 0; i < 4; i++){ for(int j = 0; j < 4; j++){ if((int)(pattern[t][s]&k) != 0){ int temp = scr.getScrArrXY(row-i,col+j); if (temp<0||temp==2) return false; } k = k >> 1; } } return true; } //同步顯示的方法 public synchronized void dispBlock(int s){ int k = 0x8000; for (int i = 0; i < 4; i++){ for(int j = 0; j < 4; j++){ if(((int)pattern[blockType][turnState]&k) != 0){ scr.drawUnit(row-i,col+j,s); } k=k>>1; } } } } //定時線程 class MyTimer extends Thread{ GameCanvas scr; public MyTimer(GameCanvas scr){ this.scr = scr; } public void run(){ while(true){ try{ sleep((10-ERS_Block.level + 1)*100); } catch(InterruptedException e){} if(!scr.getBlock().fallDown()){ scr.deleteFullLine(); if(scr.isGameEnd()){ ERS_Block.isPlay = false; suspend(); }else scr.getBlock().reset(); } } } } class WinListener extends WindowAdapter{ public void windowClosing (WindowEvent l){ System.exit(0); } } 22
9. android 俄羅斯方塊 開發
這個不太容易，由其是對「android方面不是很會」
你需要了解一些android的基礎知識，比如activity生命周期，不然你會bug不斷，增大你調試工作量
你說你懂java，那麼入門android容易
邏輯內容、數據處理自然不用說，這塊是容易的事情
UI顯示將是你工作的重點與難點
推薦用自定義sufaceview,這是雙緩沖的，小游戲開發必選
後期界面刷新頻繁，資源占內存問題OOM、兼容問題會接踵而至，要提前考慮這些內容
毫無疑問，你的設計應是面向對象的
當然最好找個demo下來研究，如果你想用引擎，引擎也不下十種，但有個新問題，那就是學會使用引擎也是三五天的事，如果你悟性高，不妨邊用邊學，那裡的精靈、物理碰撞、皮膚渲染、重力系統、粒子效果都很成熟
如果想自實現，自已從玩玩中學習，canvas操作，多邊形繪制，碰撞邏輯都將是工作重點，如果你網頁技術很高超，也可以採用webview，把技術難點轉移至網頁製作領域（不要採用有插件的設計比如flash），初級入門俄羅斯方塊有點跨台階，建議從貪吃蛇起步，網上demo也多，邏輯也容易一些