sqlserver數組循環
A. sqlserver 如何循環獲得結果集中的數據,每次獲得一條
游標循環
declare @id varchar(20)
declare MyCur cursor for select id from table
open mycur
fetch next from mycur into @id
while @@fetch_status=0
begin
--自己處理的過程
fetch next from mycur into @id
end
close mycur
B. sqlserver sql代碼循環問題
游標是sql中效率最低的,盡量不要使用游標,如果你的參數名可以自己定義的話就好辦了,比如,@test1,@test2......@test10,定義成有規律的,那麼可以通過拼參數名的方式
set @sql='update dbo.KY_ProjectResult set state=1 where Project_Result_ID='+『@test』+cast((11-@count) as char(10))
C. sqlserver怎麼循環
打開sql server management studio管理工具,點擊【新建查詢】菜單按鈕,就會出現一個空白的窗口,這個窗口是用來寫sql語句的,本文所有的演示sql語句都在這個窗口完成
D. Sqlserver存儲過程如何寫循環
declare @i int
set @i = 0
while @i < 100
begin
print @i
set @i = @i + 1
end
-- 定義循環變數
declare @loopIndex int set @loopIndex = 0
--定義循環次數
declare @count int set @count=1
-- 取得循環次數
select @count=count(1) from sys_user
-- 開始循環
while @loopIndex <= @count
begin
-- 定義接收參數
declare @USER_NAME nvarchar(50)
-- 取得循環的數據
SELECT @USER_NAME = hh.USER_NAME
FROM (SELECT ROW_NUMBER() OVER (ORDER BY USER_NAME) 'rowindex',USER_NAME FROM sys_user)hh
WHERE hh.rowindex = @loopIndex
-- 進行相關業務邏輯 例如輸出結果
print @USER_NAME
-- 循環自動加一
set @loopIndex = @loopIndex + 1
end
begin
-- 定義錯誤返回信息
declare @error int
-- 定義接收參數
declare @User_Name varchar(50)
declare @Address varchar(50)
set @error=0
--定義游標
declare demo_cursor cursor
for (select User_Name,Address from sys_user)
--打開游標--
open demo_cursor
--開始循環游標變數--
fetch next from demo_cursor into @User_Name,@Address
while @@FETCH_STATUS = 0 --返回被 FETCH語句執行的最後游標的狀態--
begin
print @User_Name+'____'+@Address
set @error= @error + @@ERROR --記錄每次運行sql後是否正確,0正確
fetch next from demo_cursor into @User_Name,@Address --轉到下一個游標,沒有會死循環
end
close demo_cursor --關閉游標
deallocate demo_cursor --釋放游標
end
更多內容請訪問: https://mxdqh.top/
E. 如何給SQLSERVER存儲過程傳遞數組參數
確切的說不行-SQL SERVER沒有數組類型,ANSI SQL 92標准也不支持數組。但可用其它的方法來實現。 1. You could simulate an array by passing one or more varchar(255) fields with comma-separated values and then use a WHILE loop with PATINDEX and SUBSTR to extract the values. 1、你可以使用幾個VARCHAR(255)欄位來模擬數組,欄位中用逗號分開各個數據,然後使用循環和PATINDEX和SUBSTR分開這些數據。 2. The more usual way to do this would be to populate a temporary table with the values you need and then use the contents of that table from within the stored-procere. Example of this below2、通常這種方法需要為這些數據創建一個臨時表,然後在存儲過程使用表中的內容。如下例create procere mytest @MyParmTempTable varchar(30)asbegin-- @MyParmTempTable contains my parameter list... 這個變數是包含參數的表名-- For simplicity use dynamic sql to into a normal temp table... create table #MyInternalList ( list_item varchar( 2 ) not null)set nocount oninsert #MyInternalList select * from sysobjects create table #MyList ( list_item varchar( 2 ) not null)insert #MyList values ( 'S' ) insert #MyList values ( 'U' ) insert #MyList values ( 'P' )exec mytest "#MyList"3. If all you wanted to do was use the array/list as input to an IN clause in a WHERE statement you could use :-3、如果你想在IN子句里使用輸入的數組參數可以這樣做:CREATE PROCEDURE sp_MyProcere (@MyCommaDelimitedString
F. 在sql server中循環語句 for要怎麼使用
sql server里有循環語句,在sqlserver 資料庫中,while循環語句是最常用的語句之一,for指定次數用的很少。比如:
SQL循環語句
declare @i int
set @i=1
while @i<30
begin
insert into test (userid) values(@i)
set @i=@i+1
end
while 條件
begin
執行操作
set @i=@i+1
end
WHILE
設置重復執行 SQL 語句或語句塊的條件,只要指定的條件為真,就重復執行語句,可以使用 BREAK 和 CONTINUE 關鍵字在循環內部控制 WHILE 循環中語句的執行。
語法
WHILE Boolean_expression
{ sql_statement | statement_block }
[ BREAK ]
{ sql_statement | statement_block }
[ CONTINUE ]
參數
Boolean_expression
返回 TRUE 或 FALSE 的表達式。如果布爾表達式中含有 SELECT 語句,必須用圓括弧將 SELECT 語句括起來。
{sql_statement | statement_block}
Transact-SQL 語句或用語句塊定義的語句分組,若要定義語句塊,請使用控制流關鍵字 BEGIN 和 END。
BREAK
G. sqlserver 有幾種循環
正常循環有兩類循環,普通循環和游標循環
普通循環:while,for ,WHILE LOOP
游標循環:針對你select出來的值進行循環
除了上述那些還有復活形的多游標,嵌套循環等。