掃雷c語言
A. c語言 掃雷
#include<stdio.h>
intmain(void)
{
charplat[100][100];//雷的地圖
charplat_new[100][100];//數字映射圖
intn,m;//存儲行、列數
intin,im;
intmark=0;//記錄該點附近8個坐標雷的總數
intj=1;
scanf("%d%d",&n,&m);
getchar();//消除回車符的影響
do{
if(n==0&&m==0)
break;
for(in=0;in<n;in++)
{
for(im=0;im<m;im++)
{
scanf("%c",&plat[in][im]);
}
getchar();
}
for(in=0;in<n;in++)
for(im=0;im<m;im++)
{
if(plat[in][im]=='*')/*該點有雷，無需檢測*/
{
plat_new[in][im]=plat[in][im];
continue;
}
if(in-1>=0)//檢測上面3個點的雷數
{
if(plat[in-1][im]=='*')
mark++;
if(im-1>=0&&plat[in-1][im-1]=='*')
mark++;
if(im+1<m&&plat[in-1][im+1]=='*')
mark++;
}
if(im-1>=0&&plat[in][im-1]=='*')//檢測左右兩個點的雷數
mark++;
if(im+1<m&&plat[in][im+1]=='*')
mark++;
if(in+1<n)//檢測下面3個點的雷數
{
if(plat[in+1][im]=='*')
mark++;
if(im-1>=0&&plat[in+1][im-1]=='*')
mark++;
if(im+1<m&&plat[in+1][im+1]=='*')
mark++;
}
switch(mark)
{
case0:plat_new[in][im]='0';break;
case1:plat_new[in][im]='1';break;
case2:plat_new[in][im]='2';break;
case3:plat_new[in][im]='3';break;
case4:plat_new[in][im]='4';break;
case5:plat_new[in][im]='5';break;
case6:plat_new[in][im]='6';break;
case7:plat_new[in][im]='7';break;
case8:plat_new[in][im]='8';break;
}
mark=0;//重置雷數
}
if(j!=1)
putchar(' ');
printf("Field#%d: ",j);
for(in=0;in<n;in++)//列印數字地圖
{
for(im=0;im<m;im++)
{
printf("%c",plat_new[in][im]);
}
if(in!=n-1)
putchar(' ');
}
scanf("%d%d",&n,&m);
getchar();
j++;
}while(1);
return0;
}
B. C語言掃雷怎麼實現
點擊（x,y）
{
如果（x,y）格子不存在，return
如果是炸彈，GG
如果已經翻開，return
如果周圍有雷，顯示雷數量，並標記翻開
否則
{
顯示空，並標記翻開
點擊（x-1,y-1）....點擊（x+1,y+1）共8個
}
}
基本思路是這樣
C. 掃雷C語言
直接一個BMP背景，定好坐標再加上你上面沒有邊框的，再處理一下邊界問題就解決了。你把功能解決了，界面的東西交給美工去做吧。
D. 急求用c語言編寫掃雷詳細代碼
/*5.3.4 源程序*/
#include <graphics.h>
#include <stdlib.h>
#include <dos.h>
#define LEFTPRESS 0xff01
#define LEFTCLICK 0xff10
#define LEFTDRAG 0xff19
#define MOUSEMOVE 0xff08
struct
{
int num;/*格子當前處於什麼狀態,1有雷，0已經顯示過數字或者空白格子*/
int roundnum;/*統計格子周圍有多少雷*/
int flag;/*右鍵按下顯示紅旗的標志,0沒有紅旗標志,1有紅旗標志*/
}Mine[10][10];
int gameAGAIN=0;/*是否重來的變數*/
int gamePLAY=0;/*是否是第一次玩游戲的標志*/
int mineNUM;/*統計處理過的格子數*/
char randmineNUM[3];/*顯示數字的字元串*/
int Keystate;
int MouseExist;
int MouseButton;
int MouseX;
int MouseY;
void Init(void);/*圖形驅動*/
void MouseOn(void);/*滑鼠游標顯示*/
void MouseOff(void);/*滑鼠游標隱藏*/
void MouseSetXY(int,int);/*設置當前位置*/
int LeftPress(void);/*左鍵按下*/
int RightPress(void);/*滑鼠右鍵按下*/
void MouseGetXY(void);/*得到當前位置*/
void Control(void);/*游戲開始,重新,關閉*/
void GameBegain(void);/*游戲開始畫面*/
void DrawSmile(void);/*畫笑臉*/
void DrawRedflag(int,int);/*顯示紅旗*/
void DrawEmpty(int,int,int,int);/*兩種空格子的顯示*/
void GameOver(void);/*游戲結束*/
void GameWin(void);/*顯示勝利*/
int MineStatistics(int,int);/*統計每個格子周圍的雷數*/
int ShowWhite(int,int);/*顯示無雷區的空白部分*/
void GamePlay(void);/*游戲過程*/
void Close(void);/*圖形關閉*/
void main(void)
{
Init();
Control();
Close();
}
void Init(void)/*圖形開始*/
{
int gd=DETECT,gm;
initgraph(&gd,&gm,"c:\\tc");
}
void Close(void)/*圖形關閉*/
{
closegraph();
}
void MouseOn(void)/*滑鼠游標顯示*/
{
_AX=0x01;
geninterrupt(0x33);
}
void MouseOff(void)/*滑鼠游標隱藏*/
{
_AX=0x02;
geninterrupt(0x33);
}
void MouseSetXY(int x,int y)/*設置當前位置*/
{
_CX=x;
_DX=y;
_AX=0x04;
geninterrupt(0x33);
}
int LeftPress(void)/*滑鼠左鍵按下*/
{
_AX=0x03;
geninterrupt(0x33);
return(_BX&1);
}
int RightPress(void)/*滑鼠右鍵按下*/
{
_AX=0x03;
geninterrupt(0x33);
return(_BX&2);
}
void MouseGetXY(void)/*得到當前位置*/
{
_AX=0x03;
geninterrupt(0x33);
MouseX=_CX;
MouseY=_DX;
}
void Control(void)/*游戲開始,重新,關閉*/
{
int gameFLAG=1;/*游戲失敗後判斷是否重新開始的標志*/
while(1)
{
if(gameFLAG)/*游戲失敗後沒判斷出重新開始或者退出遊戲的話就繼續判斷*/
{
GameBegain(); /*游戲初始畫面*/
GamePlay();/*具體游戲*/
if(gameAGAIN==1)/*游戲中重新開始*/
{
gameAGAIN=0;
continue;
}
}
MouseOn();
gameFLAG=0;
if(LeftPress())/*判斷是否重新開始*/
{
MouseGetXY();
if(MouseX>280&&MouseX<300&&MouseY>65&&MouseY<85)
{
gameFLAG=1;
continue;
}
}
if(kbhit())/*判斷是否按鍵退出*/
break;
}
MouseOff();
}
void DrawSmile(void)/*畫笑臉*/
{
setfillstyle(SOLID_FILL,YELLOW);
fillellipse(290,75,10,10);
setcolor(YELLOW);
setfillstyle(SOLID_FILL,BLACK);/*眼睛*/
fillellipse(285,75,2,2);
fillellipse(295,75,2,2);
setcolor(BLACK);/*嘴巴*/
bar(287,80,293,81);
}
void DrawRedflag(int i,int j)/*顯示紅旗*/
{
setcolor(7);
setfillstyle(SOLID_FILL,RED);
bar(198+j*20,95+i*20,198+j*20+5,95+i*20+5);
setcolor(BLACK);
line(198+j*20,95+i*20,198+j*20,95+i*20+10);
}
void DrawEmpty(int i,int j,int mode,int color)/*兩種空格子的顯示*/
{
setcolor(color);
setfillstyle(SOLID_FILL,color);
if(mode==0)/*沒有單擊過的大格子*/
bar(200+j*20-8,100+i*20-8,200+j*20+8,100+i*20+8);
else
if(mode==1)/*單擊過後顯示空白的小格子*/
bar(200+j*20-7,100+i*20-7,200+j*20+7,100+i*20+7);
}
void GameBegain(void)/*游戲開始畫面*/
{
int i,j;
cleardevice();
if(gamePLAY!=1)
{
MouseSetXY(290,70); /*滑鼠一開始的位置,並作為它的初始坐標*/
MouseX=290;
MouseY=70;
}
gamePLAY=1;/*下次按重新開始的話滑鼠不重新初始化*/
mineNUM=0;
setfillstyle(SOLID_FILL,7);
bar(190,60,390,290);
for(i=0;i<10;i++)/*畫格子*/
for(j=0;j<10;j++)
DrawEmpty(i,j,0,8);
setcolor(7);
DrawSmile();/*畫臉*/
randomize();
for(i=0;i<10;i++)/*100個格子隨機賦值有沒有地雷*/
for(j=0;j<10;j++)
{
Mine[i][j].num=random(8);/*如果隨機數的結果是1表示這個格子有地雷*/
if(Mine[i][j].num==1)
mineNUM++;/*現有雷數加1*/
else
Mine[i][j].num=2;
Mine[i][j].flag=0;/*表示沒紅旗標志*/
}
sprintf(randmineNUM,"%d",mineNUM); /*顯示這次總共有多少雷數*/
setcolor(1);
settextstyle(0,0,2);
outtextxy(210,70,randmineNUM);
mineNUM=100-mineNUM;/*變數取空白格數量*/
MouseOn();
}
void GameOver(void)/*游戲結束畫面*/
{
int i,j;
setcolor(0);
for(i=0;i<10;i++)
for(j=0;j<10;j++)
if(Mine[i][j].num==1)/*顯示所有的地雷*/
{
DrawEmpty(i,j,0,RED);
setfillstyle(SOLID_FILL,BLACK);
fillellipse(200+j*20,100+i*20,7,7);
}
}
void GameWin(void)/*顯示勝利*/
{
setcolor(11);
settextstyle(0,0,2);
outtextxy(230,30,"YOU WIN!");
}
int MineStatistics(int i,int j)/*統計每個格子周圍的雷數*/
{
int nNUM=0;
if(i==0&&j==0)/*左上角格子的統計*/
{
if(Mine[0][1].num==1)
nNUM++;
if(Mine[1][0].num==1)
nNUM++;
if(Mine[1][1].num==1)
nNUM++;
}
else
if(i==0&&j==9)/*右上角格子的統計*/
{
if(Mine[0][8].num==1)
nNUM++;
if(Mine[1][9].num==1)
nNUM++;
if(Mine[1][8].num==1)
nNUM++;
}
else
if(i==9&&j==0)/*左下角格子的統計*/
{
if(Mine[8][0].num==1)
nNUM++;
if(Mine[9][1].num==1)
nNUM++;
if(Mine[8][1].num==1)
nNUM++;
}
else
if(i==9&&j==9)/*右下角格子的統計*/
{
if(Mine[9][8].num==1)
nNUM++;
if(Mine[8][9].num==1)
nNUM++;
if(Mine[8][8].num==1)
nNUM++;
}
else if(j==0)/*左邊第一列格子的統計*/
{
if(Mine[i][j+1].num==1)
nNUM++;
if(Mine[i+1][j].num==1)
nNUM++;
if(Mine[i-1][j].num==1)
nNUM++;
if(Mine[i-1][j+1].num==1)
nNUM++;
if(Mine[i+1][j+1].num==1)
nNUM++;
}
else if(j==9)/*右邊第一列格子的統計*/
{
if(Mine[i][j-1].num==1)
nNUM++;
if(Mine[i+1][j].num==1)
nNUM++;
if(Mine[i-1][j].num==1)
nNUM++;
if(Mine[i-1][j-1].num==1)
nNUM++;
if(Mine[i+1][j-1].num==1)
nNUM++;
}
else if(i==0)/*第一行格子的統計*/
{
if(Mine[i+1][j].num==1)
nNUM++;
if(Mine[i][j-1].num==1)
nNUM++;
if(Mine[i][j+1].num==1)
nNUM++;
if(Mine[i+1][j-1].num==1)
nNUM++;
if(Mine[i+1][j+1].num==1)
nNUM++;
}
else if(i==9)/*最後一行格子的統計*/
{
if(Mine[i-1][j].num==1)
nNUM++;
if(Mine[i][j-1].num==1)
nNUM++;
if(Mine[i][j+1].num==1)
nNUM++;
if(Mine[i-1][j-1].num==1)
nNUM++;
if(Mine[i-1][j+1].num==1)
nNUM++;
}
else/*普通格子的統計*/
{
if(Mine[i-1][j].num==1)
nNUM++;
if(Mine[i-1][j+1].num==1)
nNUM++;
if(Mine[i][j+1].num==1)
nNUM++;
if(Mine[i+1][j+1].num==1)
nNUM++;
if(Mine[i+1][j].num==1)
nNUM++;
if(Mine[i+1][j-1].num==1)
nNUM++;
if(Mine[i][j-1].num==1)
nNUM++;
if(Mine[i-1][j-1].num==1)
nNUM++;
}
return(nNUM);/*把格子周圍一共有多少雷數的統計結果返回*/
}
int ShowWhite(int i,int j)/*顯示無雷區的空白部分*/
{
if(Mine[i][j].flag==1||Mine[i][j].num==0)/*如果有紅旗或該格處理過就不對該格進行任何判斷*/
return;
mineNUM--;/*顯示過數字或者空格的格子就表示多處理了一個格子,當所有格子都處理過了表示勝利*/
if(Mine[i][j].roundnum==0&&Mine[i][j].num!=1)/*顯示空格*/
{
DrawEmpty(i,j,1,7);
Mine[i][j].num=0;
}
else
if(Mine[i][j].roundnum!=0)/*輸出雷數*/
{
DrawEmpty(i,j,0,8);
sprintf(randmineNUM,"%d",Mine[i][j].roundnum);
setcolor(RED);
outtextxy(195+j*20,95+i*20,randmineNUM);
Mine[i][j].num=0;/*已經輸出雷數的格子用0表示已經用過這個格子*/
return ;
}
/*8個方向遞歸顯示所有的空白格子*/
if(i!=0&&Mine[i-1][j].num!=1)
ShowWhite(i-1,j);
if(i!=0&&j!=9&&Mine[i-1][j+1].num!=1)
ShowWhite(i-1,j+1);
if(j!=9&&Mine[i][j+1].num!=1)
ShowWhite(i,j+1);
if(j!=9&&i!=9&&Mine[i+1][j+1].num!=1)
ShowWhite(i+1,j+1);
if(i!=9&&Mine[i+1][j].num!=1)
ShowWhite(i+1,j);
if(i!=9&&j!=0&&Mine[i+1][j-1].num!=1)
ShowWhite(i+1,j-1);
if(j!=0&&Mine[i][j-1].num!=1)
ShowWhite(i,j-1);
if(i!=0&&j!=0&&Mine[i-1][j-1].num!=1)
ShowWhite(i-1,j-1);
}
void GamePlay(void)/*游戲過程*/
{
int i,j,Num;/*Num用來接收統計函數返回一個格子周圍有多少地雷*/
for(i=0;i<10;i++)
for(j=0;j<10;j++)
Mine[i][j].roundnum=MineStatistics(i,j);/*統計每個格子周圍有多少地雷*/
while(!kbhit())
{
if(LeftPress())/*滑鼠左鍵盤按下*/
{
MouseGetXY();
if(MouseX>280&&MouseX<300&&MouseY>65&&MouseY<85)/*重新來*/
{
MouseOff();
gameAGAIN=1;
break;
}
if(MouseX>190&&MouseX<390&&MouseY>90&&MouseY<290)/*當前滑鼠位置在格子范圍內*/
{
j=(MouseX-190)/20;/*x坐標*/
i=(MouseY-90)/20;/*y坐標*/
if(Mine[i][j].flag==1)/*如果格子有紅旗則左鍵無效*/
continue;
if(Mine[i][j].num!=0)/*如果格子沒有處理過*/
{
if(Mine[i][j].num==1)/*滑鼠按下的格子是地雷*/
{
MouseOff();
GameOver();/*游戲失敗*/
break;
}
else/*滑鼠按下的格子不是地雷*/
{
MouseOff();
Num=MineStatistics(i,j);
if(Num==0)/*周圍沒地雷就用遞歸演算法來顯示空白格子*/
ShowWhite(i,j);
else/*按下格子周圍有地雷*/
{
sprintf(randmineNUM,"%d",Num);/*輸出當前格子周圍的雷數*/
setcolor(RED);
outtextxy(195+j*20,95+i*20,randmineNUM);
mineNUM--;
}
MouseOn();
Mine[i][j].num=0;/*點過的格子周圍雷數的數字變為0表示這個格子已經用過*/
if(mineNUM<1)/*勝利了*/
{
GameWin();
break;
}
}
}
}
}
if(RightPress())/*滑鼠右鍵鍵盤按下*/
{
MouseGetXY();
if(MouseX>190&&MouseX<390&&MouseY>90&&MouseY<290)/*當前滑鼠位置在格子范圍內*/
{
j=(MouseX-190)/20;/*x坐標*/
i=(MouseY-90)/20;/*y坐標*/
MouseOff();
if(Mine[i][j].flag==0&&Mine[i][j].num!=0)/*本來沒紅旗現在顯示紅旗*/
{
DrawRedflag(i,j);
Mine[i][j].flag=1;
}
else
if(Mine[i][j].flag==1)/*有紅旗標志再按右鍵就紅旗消失*/
{
DrawEmpty(i,j,0,8);
Mine[i][j].flag=0;
}
}
MouseOn();
sleep(1);
}
}
}
E. 要個掃雷的c語言演算法
先把你上次問的圍棋的給你，這個掃雷的我再寫
*主函數*/ void main() { int press; int bOutWhile=FALSE;/*退出循環標志*/
Init();/*初始化圖象，數據*/
while(1) { press=GetKey();/*獲取用戶的按鍵值*/ switch(CheckKey(press))/*判斷按鍵類別*/ { /*是退出鍵*/ case KEYEXIT: clrscr();/*清屏*/ bOutWhile = TRUE; break;
/*是落子鍵*/ case KEYFALLCHESS: if(ChessGo(gPlayOrder,gCursor)==FALSE)/*走棋*/ DoError();/*落子錯誤*/ else { DoOK();/*落子正確*/
/*如果當前行棋方贏棋*/ if(JudgeWin(gPlayOrder,gCursor)==TRUE) { DoWin(gPlayOrder); bOutWhile = TRUE;/*退出循環標志置為真*/ } /*否則*/ else /*交換行棋方*/ ChangeOrder(); } break;
/*是游標移動鍵*/ case KEYMOVECURSOR: MoveCursor(gPlayOrder,press); break;
/*是無效鍵*/ case KEYINVALID: break; }
if(bOutWhile==TRUE) break; }
/*游戲結束*/ EndGame(); } /**********************************************************/
/*界面初始化，數據初始化*/ void Init(void) { int i,j; char *Msg[]= { "Player1 key:", " UP----w", " DOWN--s", " LEFT--a", " RIGHT-d", " DO----space", "", "Player2 key:", " UP----up", " DOWN--down", " LEFT--left", " RIGHT-right", " DO----ENTER", "", "exit game:", " ESC", NULL, };
/*先手方為1號玩家*/ gPlayOrder = CHESS1; /*棋盤數據清零, 即棋盤上各點開始的時候都沒有棋子*/ for(i=0;i<19;i++) for(j=0;j<19;j++) gChessBoard[i][j]=CHESSNULL; /*游標初始位置*/ gCursor.x=gCursor.y=0;
/*畫棋盤*/ textmode(C40); DrawMap();
/*顯示操作鍵說明*/ i=0; textcolor(BROWN); while(Msg[i]!=NULL) { gotoxy(25,3+i); cputs(Msg[i]); i++; }
/*顯示當前行棋方*/ ShowOrderMsg(gPlayOrder); /*游標移至棋盤的左上角點處*/ gotoxy(gCursor.x+MAPXOFT,gCursor.y+MAPYOFT); }
/*畫棋盤*/ void DrawMap(void) { int i,j;
clrscr();
for(i=0;i<19;i++) for(j=0;j<19;j++) DrawCross(i,j);
}
/*畫棋盤上的交叉點*/ void DrawCross(int x,int y) { gotoxy(x+MAPXOFT,y+MAPYOFT); /*交叉點上是一號玩家的棋子*/ if(gChessBoard[x][y]==CHESS1) { textcolor(LIGHTBLUE); putch(CHESS1); return; } /*交叉點上是二號玩家的棋子*/ if(gChessBoard[x][y]==CHESS2) { textcolor(LIGHTBLUE); putch(CHESS2); return; }
textcolor(GREEN);
/*左上角交叉點*/ if(x==0&&y==0) { putch(CROSSLU); return; }
/*左下角交叉點*/ if(x==0&&y==18) { putch(CROSSLD); return; } /*右上角交叉點*/ if(x==18&&y==0) { putch(CROSSRU); return; }
/*右下角交叉點*/ if(x==18&&y==18) { putch(CROSSRD); return; }
/*左邊界交叉點*/ if(x==0) { putch(CROSSL); return; }
/*右邊界交叉點*/ if(x==18) { putch(CROSSR); return; }
/*上邊界交叉點*/ if(y==0) { putch(CROSSU); return; }
/*下邊界交叉點*/ if(y==18) { putch(CROSSD); return; }
/*棋盤中間的交叉點*/ putch(CROSS); }
/*交換行棋方*/ int ChangeOrder(void) { if(gPlayOrder==CHESS1) gPlayOrder=CHESS2; else gPlayOrder=CHESS1;
return(gPlayOrder); }
/*獲取按鍵值*/ int GetKey(void) { char lowbyte; int press;
while (bioskey(1) == 0) ;/*如果用戶沒有按鍵，空循環*/
press=bioskey(0); lowbyte=press&0xff; press=press&0xff00 + toupper(lowbyte); return(press); }
/*落子錯誤處理*/ void DoError(void) { sound(1200); delay(50); nosound(); }
/*贏棋處理*/ void DoWin(int Order) { sound(1500);delay(100); sound(0); delay(50); sound(800); delay(100); sound(0); delay(50); sound(1500);delay(100); sound(0); delay(50); sound(800); delay(100); sound(0); delay(50); nosound();
textcolor(RED+BLINK); gotoxy(25,20); if(Order==CHESS1) cputs("PLAYER1 WIN!"); else cputs("PLAYER2 WIN!"); gotoxy(25,21); cputs(" /">\\<^+^>/"); getch(); }
/*走棋*/ int ChessGo(int Order,struct point Cursor) { /*判斷交叉點上有無棋子*/ if(gChessBoard[Cursor.x][Cursor.y]==CHESSNULL) { /*若沒有棋子, 則可以落子*/ gotoxy(Cursor.x+MAPXOFT,Cursor.y+MAPYOFT); textcolor(LIGHTBLUE); putch(Order); gotoxy(Cursor.x+MAPXOFT,Cursor.y+MAPYOFT); gChessBoard[Cursor.x][Cursor.y]=Order; return TRUE; } else return FALSE; }
/*判斷當前行棋方落子後是否贏棋*/ int JudgeWin(int Order,struct point Cursor) { int i; for(i=0;i<4;i++) /*判斷在指定方向上是否有連續5個行棋方的棋子*/ if(JudgeWinLine(Order,Cursor,i)) return TRUE; return FALSE; }
/*判斷在指定方向上是否有連續5個行棋方的棋子*/ int JudgeWinLine(int Order,struct point Cursor,int direction) { int i; struct point pos,dpos; const int testnum = 5; int count;
switch(direction) { case 0:/*在水平方向*/ pos.x=Cursor.x-(testnum-1); pos.y=Cursor.y; dpos.x=1; dpos.y=0; break; case 1:/*在垂直方向*/ pos.x=Cursor.x; pos.y=Cursor.y-(testnum-1); dpos.x=0; dpos.y=1; break; case 2:/*在左下至右上的斜方向*/ pos.x=Cursor.x-(testnum-1); pos.y=Cursor.y+(testnum-1); dpos.x=1; dpos.y=-1; break; case 3:/*在左上至右下的斜方向*/ pos.x=Cursor.x-(testnum-1); pos.y=Cursor.y-(testnum-1); dpos.x=1; dpos.y=1; break; }
count=0; for(i=0;i<testnum*2+1;i++) { if(pos.x>=0&&pos.x<=18&&pos.y>=0&&pos.y<=18) { if(gChessBoard[pos.x][pos.y]==Order) { count++; if(count>=testnum) return TRUE; } else count=0; } pos.x+=dpos.x; pos.y+=dpos.y; }
return FALSE; }
/*移動游標*/ void MoveCursor(int Order,int press) { switch(press) { case PLAY1UP: if(Order==CHESS1&&gCursor.y>0) gCursor.y--; break; case PLAY1DOWN: if(Order==CHESS1&&gCursor.y<18) gCursor.y++; break; case PLAY1LEFT: if(Order==CHESS1&&gCursor.x>0) gCursor.x--; break; case PLAY1RIGHT: if(Order==CHESS1&&gCursor.x<18) gCursor.x++; break;
case PLAY2UP: if(Order==CHESS2&&gCursor.y>0) gCursor.y--; break; case PLAY2DOWN: if(Order==CHESS2&&gCursor.y<18) gCursor.y++; break; case PLAY2LEFT: if(Order==CHESS2&&gCursor.x>0) gCursor.x--; break; case PLAY2RIGHT: if(Order==CHESS2&&gCursor.x<18) gCursor.x++; break; }
gotoxy(gCursor.x+MAPXOFT,gCursor.y+MAPYOFT); }
/*游戲結束處理*/ void EndGame(void) { textmode(C80); }
/*顯示當前行棋方*/ void ShowOrderMsg(int Order) { gotoxy(6,MAPYOFT+20); textcolor(LIGHTRED); if(Order==CHESS1) cputs("Player1 go!"); else cputs("Player2 go!");
gotoxy(gCursor.x+MAPXOFT,gCursor.y+MAPYOFT); }
/*落子正確處理*/ void DoOK(void) { sound(500); delay(70); sound(600); delay(50); sound(1000); delay(100); nosound(); }
/*檢查用戶的按鍵類別*/ int CheckKey(int press) { if(press==ESCAPE) return KEYEXIT;/*是退出鍵*/
else if ( ( press==PLAY1DO && gPlayOrder==CHESS1) || ( press==PLAY2DO && gPlayOrder==CHESS2) ) return KEYFALLCHESS;/*是落子鍵*/
else if ( press==PLAY1UP || press==PLAY1DOWN || press==PLAY1LEFT || press==PLAY1RIGHT || press==PLAY2UP || press==PLAY2DOWN || press==PLAY2LEFT || press==PLAY2RIGHT ) return KEYMOVECURSOR;/*是游標移動鍵*/
else return KEYINVALID;/*按鍵無效*/ }
F. C語言編簡單的掃雷
給你一個完整的掃雷源碼
#include <conio.h>
#include <graphics.h>
#include <stdio.h>
#include <stdlib.h>
#include <time.h>
#include <ctype.h>
#include "mouse.c"
#define YES 1
#define NO 0
#define XPX 15 /* X pixels by square */
#define YPX 15 /* Y pixels by square */
#define DEFCX 30 /* Default number of squares */
#define DEFCY 28
#define MINE 255-'0' /* So that when it prints, it prints char 0xff */
#define STSQUARE struct stsquare
STSQUARE {
unsigned char value; /* Number of mines in the surround squares */
unsigned char sqopen; /* Square is open */
unsigned char sqpress; /* Square is pressed */
unsigned char sqmark; /* Square is marked */
} *psquare;
#define value(x,y) (psquare+(x)*ncy+(y))->value
#define sqopen(x,y) (psquare+(x)*ncy+(y))->sqopen
#define sqpress(x,y) (psquare+(x)*ncy+(y))->sqpress
#define sqmark(x,y) (psquare+(x)*ncy+(y))->sqmark
int XST, /* Offset of first pixel X */
YST,
ncx, /* Number of squares in X */
ncy,
cmines, /* Mines discovered */
initmines, /* Number of initial mines */
sqclosed, /* Squares still closed */
maxy; /* Max. number of y pixels of the screen */
void Graph_init(void);
void Read_param(int argc, char *argv[]);
void Set_mines(int nminas);
void Set_square(int x, int y, int status);
void Mouse_set(void);
void Draw_squares(void);
int Do_all(void);
void Blow_up(void);
void Open_square(int x, int y);
int Open_near_squares(int x, int y);
/************************************************************************/
void main(int argc, char *argv[])
{
if (!mouse_reset()) {
cputs(" ERROR: I can't find a mouse driver\r\n");
exit(2);
}
Graph_init();
Read_param(argc, argv);
Mouse_set();
do {
randomize();
cleardevice();
Set_mines(cmines=initmines);
mouse_enable();
Draw_squares();
}
while (Do_all() != '\x1b');
closegraph();
}
/*************************************************************************
* *
* F U N C T I O N S *
* *
*************************************************************************/
/*----------------------------------------------------------------------*/
void Graph_init(void)
{
int graphdriver=DETECT, graphmode, errorcode;
if(errorcode < 0) {
cprintf("\n\rGraphics System Error: %s\n",grapherrormsg(errorcode));
exit(98);
}
initgraph(&graphdriver, &graphmode, "");
errorcode=graphresult();
if(errorcode!=grOk) {
printf(" Graphics System Error: %s\n",grapherrormsg(errorcode));
exit(98);
}
maxy=getmaxy();
} /* Graph_init */
/*----------------------------------------------------------------------*/
void Read_param(int argc, char *argv[])
{
int x, y, m;
x=y=m=0;
if (argc!=1) {
if (!isdigit(*argv[1])) {
closegraph();
cprintf("Usage is: %s [x] [y] [m]\r\n\n"
"Where x is the horizontal size\r\n"
" y is the vertical size\r\n"
" m is the number of mines\r\n\n"
" Left mouse button: Open the square\r\n"
"Right mouse button: Mark the square\r\n"
" -The first time puts a 'mine' mark\r\n"
" -The second time puts a 'possible "
"mine' mark\r\n"
" -The third time unmarks the square\r\n"
"Left+Right buttons: Open the surrounded squares only if "
"the count of mines\r\n"
" is equal to the number in the square",argv[0]);
exit (1);
}
switch (argc) {
case 4: m=atoi(argv[3]);
case 3: y=atoi(argv[2]);
case 2: x=atoi(argv[1]);
}
}
XST=100;
ncx=DEFCX;
if (maxy==479) {
YST=30;
ncy=DEFCY;
}
else {
YST=25;
ncy=20;
}
if (x>0 && x<ncx)
ncx=x;
if (y>0 && y<ncy) {
YST+=((ncy-y)*YPX)>>1;
ncy=y;
}
initmines= m ? m : ncx*ncy*4/25; /* There are about 16% of mines */
if (((void near*)psquare=calloc(ncx*ncy, sizeof(STSQUARE)))==NULL) {
closegraph();
cputs("ERROR: Not enought memory");
exit(3);
}
} /* Read_param */
/*----------------------------------------------------------------------*/
void Set_mines(int nminas)
{
G. C語言掃雷源代碼 不用滑鼠 操作 急求！！！
#include <stdio.h>
#include <stdlib.h>
#include <time.h>
#include <string.h>
#include <conio.h>
#include <windows.h>
#define N 3
struct mine_box {
char type; // '*'代表地雷，n代表周圍有地雷的地雷數（n=0-8）
char bMarked; // 是否被標記
char bOpened; // 是否被打開
} mine_array[N][N];
int CurrentRow, CurrentCol; // 記錄當前游標的位置
int openedBlank = 0; // 記錄被掀開的格子數
/*將游標定位到屏幕上的某個指定位置的坐標上*/
void gotoxy(int x,int y)
{ CONSOLE_SCREEN_BUFFER_INFO csbiInfo;
HANDLE hConsoleOut;
hConsoleOut = GetStdHandle(STD_OUTPUT_HANDLE);
GetConsoleScreenBufferInfo(hConsoleOut,&csbiInfo);
csbiInfo.dwCursorPosition.X = x;
csbiInfo.dwCursorPosition.Y = y;
SetConsoleCursorPosition(hConsoleOut,csbiInfo.dwCursorPosition);
}
// 顯示一個格子的內容
void printBox(struct mine_box mb)
{
// 格子沒被掀開也沒做標記
if(mb.bOpened == 0 && mb.bMarked == 0)
printf("□");
// 格子被標記一次
else if(mb.bMarked == 1)
printf("√");
// 格子被標記兩次
else if(mb.bMarked == 2)
printf("？");
// 格子被掀開，顯示格子中的內容
else
switch(mb.type) {
// 格子中有地雷
case '*':
printf("⊕");
break;
// 格子沒有地雷並且四周也沒有地雷
case 0:
printf("");
break;
case 1:
printf("1");
break;
case 2:
printf("2");
break;
case 3:
printf("3");
break;
case 4:
printf("4");
break;
case 5:
printf("5");
break;
case 6:
printf("6");
break;
case 7:
printf("7");
break;
case 8:
printf("8");
break;
}
}
// 將游標移動到第row行第col列的格子上
void MoveTo(int row, int col)
{
CurrentRow = row;
CurrentCol = col;
gotoxy(CurrentCol*4+2,CurrentRow*2+1);
}
// 刷新屏幕
void refreshScreen(int state)
{
int i, j;
gotoxy(0, 0);
printf("┏━");
for(i = 1; i < N; i++)
printf("┳━");
printf("┓\n");
for(i = 0; i < N; i++) {
printf("┃");
for(j = 0; j < N; j++) {
if(state == -1 && mine_array[i][j].bMarked == 1 && mine_array[i][j].type != '*') {
printf("¤"); // 標記錯了地雷
continue;
}
if(state != 0) { // 游戲結束，將所有的盒子掀開顯示其中內容
mine_array[i][j].bOpened = 1;
mine_array[i][j].bMarked = 0;
}
printBox(mine_array[i][j]);
printf("┃");
}
if(i < N-1) {
printf("\n┣");
for(j = 1; j < N; j++) {
printf("━╋");
}
printf("━┫\n");
}
else {
printf("\n┗");
for(j = 1; j < N; j++) {
printf("━┻");
}
printf("━┛\n");
}
}
printf("按鍵指南：A左移，D右移，W上移，S下移，X翻開，C標記，Q退出\n");
}
void MoveUp()
{
if(CurrentRow > 0) {
CurrentRow --;
MoveTo(CurrentRow, CurrentCol);
}
}
void MoveDown()
{
if(CurrentRow < N-1) {
CurrentRow ++;
MoveTo(CurrentRow, CurrentCol);;
}
}
void MoveLeft()
{
if(CurrentCol > 0) {
CurrentCol --;
MoveTo(CurrentRow, CurrentCol);
}
}
void MoveRight()
{
if(CurrentCol < N-1) {
CurrentCol ++;
MoveTo(CurrentRow, CurrentCol);
}
}
int openMine()
{
int saveRow = CurrentRow, saveCol = CurrentCol;
if(mine_array[CurrentRow][CurrentCol].bOpened)
return 0;
mine_array[CurrentRow][CurrentCol].bOpened = 1;
mine_array[CurrentRow][CurrentCol].bMarked = 0;
if(mine_array[CurrentRow][CurrentCol].type == '*') {
refreshScreen(-1);
MoveTo(N+1, 0);
printf("失敗！游戲結束)\n");
exit(2);
}
printBox(mine_array[CurrentRow][CurrentCol]);
MoveTo(CurrentRow, CurrentCol);
// 進一步要做的是當掀開一個type=0的空格子時，將其周圍沒有地雷的空格子自動掀開
return 1;
}
void markMine()
{
if(mine_array[CurrentRow][CurrentCol].bOpened == 1)
return;
if(mine_array[CurrentRow][CurrentCol].bMarked == 0)
mine_array[CurrentRow][CurrentCol].bMarked = 1;
else if(mine_array[CurrentRow][CurrentCol].bMarked == 1)
mine_array[CurrentRow][CurrentCol].bMarked = 2;
else if(mine_array[CurrentRow][CurrentCol].bMarked ==2)
mine_array[CurrentRow][CurrentCol].bMarked = 0;
printBox(mine_array[CurrentRow][CurrentCol]);
MoveTo(CurrentRow, CurrentCol);
}
main()
{
int num, i, j, row, col, count;
printf("輸入地雷數: ");
scanf("%u", &num);
if(num > N*N) {
printf("地雷數超限\n");
return -1;
}
memset((void*)mine_array, 0, N*N*sizeof(struct mine_box));
//隨機設置num個地雷的位置
srand((unsigned)time(NULL));
for(i=0; i<num; i++) {
row = rand()%N;
col = rand()%N;
if(mine_array[row][col].type == 0)
mine_array[row][col].type = '*';
else // 已經有雷了，重新取下一個格子
i--;
}
// 計算每個非雷格子周圍的地雷數
for(row=0; row<N; row++)
{
for(col = 0; col < N; col++) {
if(mine_array[row][col].type == '*') {
for(i = row-1; i <= row+1; i++) {
for(j = col-1; j <= col+1; j++) {
if(i >= 0 && j >= 0 && i < N && j < N && mine_array[i][j].type != '*')
mine_array[i][j].type ++;
}
}
}
}
}
refreshScreen(0);
MoveTo(N/2, N/2); // 將游標移到中央的位置
do {
switch(getch()) {
case 'a':
case 'A':
MoveLeft();
break;
case 's':
case 'S':
MoveDown();
break;
case 'd':
case 'D':
MoveRight();
break;
case 'w':
case 'W':
MoveUp();
break;
case 'x':
case 'X':
if(openMine() == 1) {
if(++openedBlank == N*N-num) { //所有的空格都被掀開
refreshScreen(1);
MoveTo(N+1, 0);
printf("成功！游戲結束。\n");
exit(0);
}
}
break;
case 'c':
case 'C':
markMine();
break;
case 'q':
case 'Q':
MoveTo(N+1, 0);
printf("是否退出？(y/n)");
if(getch() == 'y')
return 0;
}
} while(1);
}
H. C語言掃雷演算法，也可以別的語言，解釋清楚演算法就好
在這上面不好說明, 我有C的代碼, 你看一下(DEVC++)
#include<stdio.h>
#include<stdlib.h>
#include<time.h>
#include<windows.h>
#definen15
intrestart=0;
intlast_sel_x,last_sel_y;
charin[20];
structPOINT
{
intx;
inty;
}pt;
//設置CMD窗口游標位置
voidsetxy(intx,inty)
{
COORDcoord={x,y};
SetConsoleCursorPosition(GetStdHandle(STD_OUTPUT_HANDLE),coord);
}
//獲取當前CMD當前游標所在位置
voidgetxy()
{
HANDLEhConsole=GetStdHandle(STD_OUTPUT_HANDLE);
COORDcoordScreen={0,0};//游標位置
CONSOLE_SCREEN_BUFFER_INFOcsbi;
if(GetConsoleScreenBufferInfo(hConsole,&csbi))
{
//printf("游標坐標:(%d,%d) ",csbi.dwCursorPosition.X,csbi.dwCursorPosition.Y);
pt.x=csbi.dwCursorPosition.X;
pt.y=csbi.dwCursorPosition.Y;
}
}
structA
{
intvalue;//-1為雷
intstate;//顯示狀態:0為未打開,1為已打開
intlock;//鎖定狀態
intbomb;//雷已標記:0為未標記,1為已標記
};
structAs[10][10];
intcalc()
{
inti,j,count=0;
for(i=0;i<10;i++)
{
for(j=0;j<10;j++)
{
if(s[i][j].state==0)count++;
}
}
returncount;
}
intprt()
{
system("cls");
intcount=calc();
inti,j;
printf("%3c",'');
SetConsoleTextAttribute(GetStdHandle(STD_OUTPUT_HANDLE),FOREGROUND_INTENSITY|
FOREGROUND_GREEN);
for(i=0;i<10;i++)
{
printf("%3d",i);
}
SetConsoleTextAttribute(GetStdHandle(STD_OUTPUT_HANDLE),FOREGROUND_INTENSITY|
FOREGROUND_RED|FOREGROUND_GREEN|FOREGROUND_BLUE);
for(i=0;i<10;i++)
{
printf(" ");
SetConsoleTextAttribute(GetStdHandle(STD_OUTPUT_HANDLE),FOREGROUND_INTENSITY|
FOREGROUND_GREEN);
printf("%3d",i);
SetConsoleTextAttribute(GetStdHandle(STD_OUTPUT_HANDLE),FOREGROUND_INTENSITY|
FOREGROUND_RED|FOREGROUND_GREEN|FOREGROUND_BLUE);
for(j=0;j<10;j++)
{
if(s[i][j].bomb==1)
{
SetConsoleTextAttribute(GetStdHandle(STD_OUTPUT_HANDLE),FOREGROUND_INTENSITY|
FOREGROUND_RED);
printf("%3c",'*');
SetConsoleTextAttribute(GetStdHandle(STD_OUTPUT_HANDLE),FOREGROUND_INTENSITY|
FOREGROUND_RED|FOREGROUND_GREEN|FOREGROUND_BLUE);
}
elseif(s[i][j].state==1)
{
if(s[i][j].value==0)printf("%3c",'');
elseprintf("%3d",s[i][j].value);
}
else
{
printf("%3c",'-');
}
/* if(s[i][j].value==-1) printf("%3c",'*');
elseprintf("%3d",s[i][j].value);*/
}
SetConsoleTextAttribute(GetStdHandle(STD_OUTPUT_HANDLE),FOREGROUND_INTENSITY|
FOREGROUND_GREEN);
printf("%3d",i);
SetConsoleTextAttribute(GetStdHandle(STD_OUTPUT_HANDLE),FOREGROUND_INTENSITY|
FOREGROUND_RED|FOREGROUND_GREEN|FOREGROUND_BLUE);
}
printf(" ");
printf("%3c",'');
SetConsoleTextAttribute(GetStdHandle(STD_OUTPUT_HANDLE),FOREGROUND_INTENSITY|
FOREGROUND_GREEN);
for(i=0;i<10;i++)
{
printf("%3d",i);
}
SetConsoleTextAttribute(GetStdHandle(STD_OUTPUT_HANDLE),FOREGROUND_INTENSITY|
FOREGROUND_RED|FOREGROUND_GREEN|FOREGROUND_BLUE);
printf(" ");
getxy();
setxy(45,0);
printf("%d",count);
setxy(40,5);
printf("說明");
setxy(40,7);
printf("1:輸入*xy(如:*55),則把第5行第5列");
setxy(40,8);
printf("標記為地雷");
setxy(40,10);
printf("2:輸入xy(如55),則把第5行第5列打開");
if(count==n)
{
for(i=0;i<10;i++)
{
for(j=0;j<10;j++)
{
if(s[i][j].value==-1&&s[i][j].bomb==0)s[i][j].bomb=1;
if(s[i][j].value!=-1&&s[i][j].state==0)s[i][j].state=1;
}
}
setxy(50,2);
printf("success!");
setxy(pt.x,pt.y);
fflush(stdin);
getchar();
return1;
}
setxy(pt.x,pt.y);
return0;
}
voidspace_process(intx,inty)
{
inti,j;
if(x-1>=0&&y-1>=0)
{
if(s[x-1][y-1].value==0&&s[x-1][y-1].lock==0){s[x-1][y-1].state=1;s[x-1][y-1].lock=1;space_process(x-1,y-1);}
elseif(s[x-1][y-1].value!=-1)s[x-1][y-1].state=1;
}
if(x-1>=0)
{
if(s[x-1][y].value==0&&s[x-1][y].lock==0){s[x-1][y].state=1;s[x-1][y].lock=1;space_process(x-1,y);}
elseif(s[x-1][y].value!=-1)s[x-1][y].state=1;
}
if(x-1>=0&&y+1<10)
{
if(s[x-1][y+1].value==0&&s[x-1][y+1].lock==0){s[x-1][y+1].state=1;s[x-1][y+1].lock=1;space_process(x-1,y+1);}
elseif(s[x-1][y+1].value!=-1)s[x-1][y+1].state=1;
}
if(y-1>=0)
{
if(s[x][y-1].value==0&&s[x][y-1].lock==0){s[x][y-1].state=1;s[x][y-1].lock=1;space_process(x,y-1);}
elseif(s[x][y-1].value!=-1)s[x][y-1].state=1;
}
if(y+1<10)
{
if(s[x][y+1].value==0&&s[x][y+1].lock==0){s[x][y+1].state=1;s[x][y+1].lock=1;space_process(x,y+1);}
elseif(s[x][y+1].value!=-1)s[x][y+1].state=1;
}
if(x+1<10&&y-1>=0)
{
if(s[x+1][y-1].value==0&&s[x+1][y-1].lock==0){s[x+1][y-1].state=1;s[x+1][y-1].lock=1;space_process(x+1,y-1);}
elseif(s[x+1][y-1].value!=-1)s[x+1][y-1].state=1;
}
if(x+1<10)
{
if(s[x+1][y].value==0&&s[x+1][y].lock==0){s[x+1][y].state=1;s[x+1][y].lock=1;space_process(x+1,y);}
elseif(s[x+1][y].value!=-1)s[x+1][y].state=1;
}
if(x+1<10&&y+1<10)
{
if(s[x+1][y+1].value==0&&s[x+1][y+1].lock==0){s[x+1][y+1].state=1;s[x+1][y+1].lock=1;space_process(x+1,y+1);}
elseif(s[x+1][y+1].value!=-1)s[x+1][y+1].state=1;
}
}
intprocess_char(char*t,int*i,int*j)
{
intlen=strlen(t);
intx,y=0;
for(x=0;x<len;x++)
{
if(t[x]=='')
{
continue;
}
else
{
t[y++]=t[x];
}
}
t[y]=' ';
if(t[0]=='*')
{
*i=t[1]-'0';
*j=t[2]-'0';
if(s[*i][*j].bomb==1)
{
s[*i][*j].bomb=0;
s[*i][*j].state=0;
}
elseif(s[*i][*j].bomb==0&&s[*i][*j].state==0)
{
s[*i][*j].bomb=1;
}
return1;
}
elseif(t[0]>='0'&&t[0]<='9')
{
*i=t[0]-'0';
*j=t[1]-'0';
return0;
}
return1;
}
intplus(intx,inty)//返回0為出錯，返回1為正確，返回-1為取消
{
intcount=s[x][y].value;
intbomb=0;
if(count==0||count==-1)return-1;
if(x-1>=0&&y-1>=0)
{
if(s[x-1][y-1].bomb==1)bomb++;
}
if(x-1>=0)
{
if(s[x-1][y].bomb==1)bomb++;
}
if(x-1>=0&&y+1<10)
{
if(s[x-1][y+1].bomb==1)bomb++;
}
if(y-1>=0)
{
if(s[x][y-1].bomb==1)bomb++;
}
if(y+1<10)
{
if(s[x][y+1].bomb==1)bomb++;
}
if(x+1<10&&y-1>=0)
{
if(s[x+1][y-1].bomb==1)bomb++;
}
if(x+1<10)
{
if(s[x+1][y].bomb==1)bomb++;
}
if(x+1<10&&y+1<10)
{
if(s[x+1][y+1].bomb==1)bomb++;
}
if(bomb==s[x][y].value)
{
if(x-1>=0&&y-1>=0)
{
if(s[x-1][y-1].value==-1&&s[x-1][y-1].bomb==0){return0;}
}
if(x-1>=0)
{
if(s[x-1][y].value==-1&&s[x-1][y].bomb==0)return0;
}
if(x-1>=0&&y+1<10)
{
if(s[x-1][y+1].value==-1&&s[x-1][y+1].bomb==0)return0;
}
if(y-1>=0)
{
if(s[x][y-1].value==-1&&s[x][y-1].bomb==0)return0;
}
if(y+1<10)
{
if(s[x][y+1].value==-1&&s[x][y+1].bomb==0)return0;
}
if(x+1<10&&y-1>=0)
{
if(s[x+1][y-1].value==-1&&s[x+1][y-1].bomb==0)return0;
}
if(x+1<10)
{
if(s[x+1][y].value==-1&&s[x+1][y].bomb==0)return0;
}
if(x+1<10&&y+1<10)
{
if(s[x+1][y+1].value==-1&&s[x+1][y+1].bomb==0)return0;
}
space_process(x,y);
inti,j;
for(i=0;i<10;i++)
{
for(j=0;j<10;j++)
{
s[i][j].lock=0;
}
}
return1;
}
else
{
return-1;
}
}
voidprt_selected(intx,inty,intflag)
{
if(flag==0)
{
if(x>=0)x=last_sel_x;
if(y>=0)y=last_sel_y;
}
intplus=2;
getxy();
if(x>=0)
{
last_sel_x=x;
setxy(3,x+1);
intj;
if(flag==1) SetConsoleTextAttribute(GetStdHandle(STD_OUTPUT_HANDLE),BACKGROUND_BLUE|FOREGROUND_INTENSITY);
elseSetConsoleTextAttribute(GetStdHandle(STD_OUTPUT_HANDLE),FOREGROUND_INTENSITY|
FOREGROUND_RED|FOREGROUND_GREEN|FOREGROUND_BLUE);
for(j=0;j<10;j++)
{
if(s[x][j].bomb==1)
{
if(flag==1) SetConsoleTextAttribute(GetStdHandle(STD_OUTPUT_HANDLE),FOREGROUND_INTENSITY|
FOREGROUND_RED|BACKGROUND_BLUE);
elseSetConsoleTextAttribute(GetStdHandle(STD_OUTPUT_HANDLE),FOREGROUND_INTENSITY|
FOREGROUND_RED|FOREGROUND_GREEN|FOREGROUND_BLUE);
printf("%3c",'*');
}
elseif(s[x][j].state==1)
{
if(s[x][j].value==0)printf("%3c",'');
elseprintf("%3d",s[x][j].value);
}
else
{
printf("%3c",'-');
}
}
SetConsoleTextAttribute(GetStdHandle(STD_OUTPUT_HANDLE),FOREGROUND_INTENSITY|
FOREGROUND_RED|FOREGROUND_GREEN|FOREGROUND_BLUE);
}
if(y>=0)
{
inti;
last_sel_y=y;
for(i=0;i<10;i++)
{
if(last_sel_x==i) continue;
if(flag==1) SetConsoleTextAttribute(GetStdHandle(STD_OUTPUT_HANDLE),BACKGROUND_BLUE|FOREGROUND_INTENSITY);
elseSetConsoleTextAttribute(GetStdHandle(STD_OUTPUT_HANDLE),FOREGROUND_INTENSITY|
FOREGROUND_RED|FOREGROUND_GREEN|FOREGROUND_BLUE);
setxy(3*y+3,i+1);
if(s[i][y].bomb==1)
{
if(flag==1) SetConsoleTextAttribute(GetStdHandle(STD_OUTPUT_HANDLE),FOREGROUND_INTENSITY|
FOREGROUND_RED|BACKGROUND_BLUE);
elseSetConsoleTextAttribute(GetStdHandle(STD_OUTPUT_HANDLE),FOREGROUND_INTENSITY|
FOREGROUND_RED|FOREGROUND_GREEN|FOREGROUND_BLUE);
printf("%3c",'*');
}
elseif(s[i][y].state==1)
{
if(s[i][y].value==0)printf("%3c",'');
elseprintf("%3d",s[i][y].value);
}
else
{
printf("%3c",'-');
}
}
}
SetConsoleTextAttribute(GetStdHandle(STD_OUTPUT_HANDLE),FOREGROUND_INTENSITY|
FOREGROUND_RED|FOREGROUND_GREEN|FOREGROUND_BLUE);
setxy(pt.x,pt.y);
}
voidinput()//實時獲取鍵盤輸入
{
intc;
intx=-1,y=-1;
inti=0;
intfirst_num=0;
while(1)
{
fflush(stdin);
c=getch();
printf("%c",c);
if(c==10||c==13) break;
if(c==8&&i>0)
{
in[i-1]=' ';
if(in[0]=='*')
{
if(in[1]<'0'||in[1]>'9')
{
x=-1;
prt_selected(last_sel_x,-1,0);
}
if(in[2]<'0'||in[2]>'9')
{
y=-1;
prt_selected(-1,last_sel_y,0);
}
}
else
{
if(in[0]<'0'||in[0]>'9')
{
x=-1;
prt_selected(last_sel_x,-1,0);
}
if(in[1]<'0'||in[1]>'9')
{
y=-1;
prt_selected(-1,last_sel_y,0);
}
}
i--;
getxy();
setxy(pt.x,pt.y);
printf("");
setxy(pt.x,pt.y);
}
elseif(c=='*'||(c>='0'&&c<='9'))
{
in[i++]=c;
if(in[0]=='*')
{
if(in[1]!=' '&&in[1]>='0'&&in[1]<='9')
{
x=in[1]-'0';
}
else
{
x=-1;
}
if(in[2]!=' '&&in[2]>='0'&&in[2]<='9')
{
y=in[2]-'0';
}
else
{
y=-1;
}
}
elseif(in[0]>='0'&&in[0]<='9')
{
x=in[0]-'0';
if(in[1]>='0'&&in[1]<='9')
{
y=in[1]-'0';
}
else
{
y=-1;
}
}
elsex=-1;
if(x>-1)prt_selected(x,-1,1);
if(y>-1)prt_selected(-1,y,1);
}
}
}
intmain()
{
inti=0,j,x,y;
while(1)
{
restart=0;
for(i=0;i<10;i++)
{
for(j=0;j<10;j++)
{
s[i][j].value=0;
s[i][j].state=0;
s[i][j].lock=0;
s[i][j].bomb=0;
}
}
srand((unsigned)time(0));
i=0;
while(i<n)
{
x=rand()%10;
y=rand()%10;
if(s[x][y].value!=-1)
{
s[x][y].value=-1;
i++;
}
}
for(i=0;i<10;i++)
{
for(j=0;j<10;j++)
{
if(s[i][j].value==-1) continue;
// n=0;
if(i-1>=0)
{
if(s[i-1][j].value==-1) s[i][j].value++;
if(j-1>=0)
{
if(s[i-1][j-1].value==-1) s[i][j].value++;
}
if(j+1<10)
{
if(s[i-1][j+1].value==-1) s[i][j].value++;
}
}
if(i+1<10)
{
if(s[i+1][j].value==-1) s[i][j].value++;
if(j-1>=0)
{
if(s[i+1][j-1].value==-1) s[i][j].value++;
}
if(j+1<10)
{
if(s[i+1][j+1].value==-1) s[i][j].value++;
}
}
if(j-1>=0)
{
if(s[i][j-1].value==-1) s[i][j].value++;
}
if(j+1<10)
{
if(s[i][j+1].value==-1) s[i][j].value++;
}
}
}
if(prt()==1)
{
restart=1;
continue;
}
while(1)
{
memset(in,' ',20);
fflush(stdin);
// scanf("%[^ ]",in);
input();
if(process_char(in,&i,&j)==1)
{
if(prt()==1)
{
restart=1;
break;
}
continue;
}
for(x=0;x<10;x++)
{
for(y=0;y<10;y++)
{
s[x][y].lock=0;
}
}
if(s[i][j].value==-1)
{
printf(" Bomb");
fflush(stdin);
getchar();
restart=1;
}
elseif(s[i][j].value==0)
{
s[i][j].state=1;
space_process(i,j);
}
elseif(s[i][j].state==1)
{
intre=plus(i,j);
{
switch(re)
{
case-1:
break;
case0:
printf(" Bomb");
fflush(stdin);
getchar();
restart=1;
break;
case1:break;
}
}
}
else
{
s[i][j].state=1;
}
if(prt()==1||restart==1)
{
restart=0;
break;
}
}
}
return0;
}
I. 如何用C語言編程 掃雷！~
C語言模擬掃雷的代碼如下：
#include<stdio.h>
#include<time.h>
#include<stdlib.h>
int map[9][9] = {0};
int result[9][9] = {0};
int mine[10][2];
bool Check(int i)
{
int j;
for(j=0;j<i;j++)
if(mine[j][0] == mine[i][0] && mine[j][1] == mine[i][0]) return true;
return false;
}
int MineNum(int x,int y) //這個函數計算坐標(x,y)周圍地雷的數目
{
int sum = 0;
int i,j;
if(x-1>=0 && x+1<=8 && y-1>=0 && y+1<=8)
{//中間位置
for(i=x-1;i<=x+1;i++)
for(j=y-1;j<=y+1;j++) sum += map[i][j];
return (sum-map[x][y])/9;
}
if(x==0 && y==0) return (map[0][1]+map[1][0]+map[1][1])/9; //左上角
if(x==0 && y==8) return (map[0][7]+map[1][7]+map[1][8])/9; //右上角
if(x==8 && y==0) return (map[7][0]+map[7][1]+map[8][1])/9; //左下角
if(x==8 && y==8) return (map[7][7]+map[7][8]+map[8][7])/9; //右上角
if(x==0)
{//上邊界
for(i=x;i<=x+1;i++)
for(j=y-1;j<=y+1;j++) sum += map[i][j];
return (sum-map[x][y])/9;
}
if(x==8)
{//下邊界
for(i=x-1;i<=x;i++)
for(j=y-1;j<=y+1;j++) sum += map[i][j];
return (sum-map[x][y])/9;
}
if(y==0)
{//左邊界
for(i=x-1;i<=x+1;i++)
for(j=y;j<=y+1;j++) sum += map[i][j];
return (sum-map[x][y])/9;
}
if(y==8)
{//右邊界
for(i=x-1;i<=x+1;i++)
for(j=y-1;j<=y;j++) sum += map[i][j];
return (sum-map[x][y])/9;
}
}
void main()
{
int i,j,x,y;
srand((int)time(0));
for(i=0;i<10;i++)
{
do{
mine[i][0] = rand()%9;
mine[i][1] = rand()%9;
}while(Check(i));
printf("%d\t%d\n",mine[i][0],mine[i][1]);
}
//標識地雷
for(i=0;i<10;i++) map[mine[i][0]][mine[i][1]] = 9;
//計算地雷的數目
for(i=0;i<9;i++)
{
for(j=0;j<9;j++)
{
if(map[i][j] == 9) result[i][j] = 9;
else result[i][j] = MineNum(i,j);
printf("%d ",result[i][j]);
}
printf("\n");
}
}