centos源碼安裝php

A. centos 如何檢測php安裝

需要准備的材料分別是：電腦、centos主機，linux連接工具。

1、首先連接上centos主機，進入等待輸入指令的linux命令行狀態。

B. centos下安裝php

yum install -y php
## 這個只安裝PHP
## 建議安裝運行庫及Mysql的支持
yum install -y php php-devel php-mysql
## 如果你的系統是CentOS 5.6那麼上面這條命令安裝的是PHP 5.1,要安裝 PHP 5.3則執行下面的命令:
yum install -y php53 php53-devel php53-mysql

C. 我的vps已安裝了centos-7.6-x86_64，怎樣安裝php擴展

為了讓網站成功運行，就需要在php中增加bcmath這個擴展（其實默認的php中已經存在bcmath擴展，但是沒有安裝編譯）
安裝php的擴展bcmath具體步驟如下（以下操作均在wdcp 2.4的環境中）：
1、ssh登陸vps控制台後，進入要安裝的擴展的源碼目錄:cd /root/lanmp/php-5.2.17/ext/bcmath
2、運行phpize，這是wdcp中的路徑: /www/wdlinux/php/bin/phpize
出現如下提示:
configuring for:
php api version:
20041225
zend mole api no: 20060613
zend extension api no: 220060519
3、編譯安裝：
./configure --with-php-config=/www/wdlinux/php/bin/php-config
make
make install
4、增加到配置文件php.ini里
vi /www/wdlinux/etc/php.ini
在最後增加：extension=bcmath.so
5、重啟服務
service httpd restart
service nginxd restart
然後就大功告成

D. centos編譯安裝php7怎麼加入apache

直接下載PHP7.0.2的安裝包解壓，編譯，安裝:
下載php7,並解壓
$ cd /usr/src/
$ wget http://cn2.php.net/distributions/php-7.0.2.tar.gz
#解壓
$ tar -xzxvf php-7.0.2.tar.gz
$ cd php-7.0.2
解壓完後先不要編譯，請檢查是否安裝了gcc ,沒有的話執行yum install gcc
檢查是否安裝了libxml2 ,沒有的話執行yum install libxml2
檢查是否安裝了libxml2-devel,沒有的話執行yum install libxml2-devel
註：因為改為用nginx了，所以編譯參數中的--with-apxs2=/usr/bin/apxs去掉了，如果要配置apache用，安裝PHP前，請先安裝apache。

E. centos6.5怎麼安裝php5.5

1.******已安裝Nginx******
ps -aux | grep nginx
netstat -anptu | grep 80

2.清除系統中php痕跡：
yum remove php
rm -rvf /etc/php
rm -rvf /etc/php.ini
rm -f /usr/bin/php

3.安裝php所需軟體包：
tar zxvf autoconf-2.68.tar.gz -C /usr/src
cd /usr/src/autoconf-2.68/
./configure && make && make install
tar zxvf libiconv-1.14.tar.gz -C /usr/src
cd /usr/src/libiconv-1.14/
./configure && make && make install
tar zxvf libmcrypt-2.5.8.tar.gz -C /usr/src
cd /usr/src/libmcrypt-2.5.8/
./configure && make && make install
ldconfig
cd libltdl/
./configure --enable-ltdl-install
make && make install
export LD_LIBRARY_PATH=/usr/local/lib:$LD_LIBRARY_PATH
tar zxvf mhash-0.9.9.9.tar.gz -C /usr/src
cd /usr/src/mhash-0.9.9.9/
./configure && make && make install
tar zxvf mcrypt-2.6.8.tar.gz -C /usr/src
cd /usr/src/mcrypt-2.6.8/
./configure && make && make install

4.載入php動態模塊：
ln -s /usr/local/lib/libmcrypt.la /usr/lib64/libmcrypt.la
ln -s /usr/local/lib/libmcrypt.so /usr/lib64/libmcrypt.so
ln -s /usr/local/lib/libmcrypt.so.4 /usr/lib64/libmcrypt.so.4
ln -s /usr/local/lib/libmcrypt.so.4.4.8
/usr/lib64/libmcrypt.so.4.4.8
ln -s /usr/local/lib/libmhash.a /usr/lib64/libmhash.a
ln -s /usr/local/lib/libmhash.la /usr/lib64/libmhash.la
ln -s /usr/local/lib/libmhash.so /usr/lib64/libmhash.so
ln -s /usr/local/lib/libmhash.so.2 /usr/lib64/libmhash.so.2
ln -s /usr/local/lib/libmhash.so.2.0.1
/usr/lib64/libmhash.so.2.0.1
cp -R /usr/lib64/libpng.* /usr/lib/
cp -R /usr/lib64/libjpeg.* /usr/lib/
echo "/lib" >> /etc/ld.so.conf
echo "/usr/lib" >> /etc/ld.so.conf
echo "/usr/lib64" >> /etc/ld.so.conf
echo "/usr/local/lib" >> /etc/ld.so.conf
echo "* soft nproc 65535" >> /etc/security/limits.conf
echo "* hard nproc 65535" >> /etc/security/limits.conf
echo "* soft nofile 65535" >> /etc/security/limits.conf
echo "* hard nofile 65535" >> /etc/security/limits.conf
echo "fs.file-max=65535" >> /etc/sysctl.conf

ldconfig

5.解壓、配置、編譯、安裝php：
tar zxvf php-5.5.25.tar.gz -C /usr/src
cd /usr/src/php-5.5.25/
./configure --prefix=/usr/local/php \
--with-config-file-path=/usr/local/php/etc \
--enable-fpm \
--with-fpm-user=www \
--with-fpm-group=www \
--with-mysql=mysqlnd \
--with-mysqli=mysqlnd \
--with-pdo-mysql=mysqlnd \
--with-iconv-dir \
--with-freetype-dir \
--with-jpeg-dir \
--with-png-dir \
--with-zlib \
--with-libxml-dir=/usr \
--enable-xml \
--enable-opcache \
--disable-rpath \
--enable-bcmath \
--enable-shmop \
--enable-sysvsem \
--enable-inline-optimization \
--with-curl \
--enable-mbregex \
--enable-mbstring \
--with-mcrypt \
--enable-ftp \
--with-gd \
--enable-gd-native-ttf \
--with-openssl \
--with-mhash \
--enable-pcntl \
--enable-sockets \
--with-xmlrpc \
--enable-zip \
--enable-soap \
--without-pear \
--with-gettext \
--disable-fileinfo
make ZEND_EXTRA_LIBS='-liconv'
make install

6.鏈接php可執行文件：
ln -s /usr/local/php/bin/php /usr/bin/php
ln -s /usr/local/php/bin/phpize /usr/bin/phpize
ln -s /usr/local/php/sbin/php-fpm /usr/bin/php-fpm

7.編輯php.ini配置文件：
cp /usr/src/php-5.5.25/php.ini-proction
/usr/local/php/etc/php.ini
ln -s /usr/local/php/etc/php.ini /etc/php.ini
vim /etc/php.ini
[PHP]
engine = On
zend.ze1_compatibility_mode = Off
short_open_tag = On
asp_tags = Off
precision
= 12
y2k_compliance = On
output_buffering = On
zlib.output_compression = Off
implicit_flush = Off
unserialize_callback_func=
serialize_precision = 100
safe_mode = Off
safe_mode_gid = Off
safe_mode_include_dir =
safe_mode_exec_dir =
safe_mode_allowed_env_vars = PHP_
safe_mode_protected_env_vars = LD_LIBRARY_PATH
disable_functions =
passthru,exec,system,chroot,scandir,chgrp,chown,shell_exec,proc_open,proc_get_status,ini_alter,ini_restore,dl,openlog,syslog,readlink,symlink,popepassthru,stream_socket_server,fsocket
disable_classes =
expose_php = On
error_reporting = E_ALL & ~E_NOTICE
display_errors = On
display_startup_errors = Off
log_errors = Off
log_errors_max_len = 1024
ignore_repeated_errors = Off
ignore_repeated_source = Off
report_memleaks = On
track_errors = Off
variables_order = "EGPCS"
register_globals = Off
register_long_arrays = Off
register_argc_argv = On
auto_globals_jit = On
post_max_size = 50M
magic_quotes_gpc = Off
magic_quotes_runtime = Off
magic_quotes_sybase = Off
auto_prepend_file =
auto_append_file =
default_mimetype = "text/html"
doc_root =
user_dir =
extension_dir =
"/usr/local/php/lib/php/extensions/no-debug-non-zts-20121212/"
enable_dl = On
cgi.fix_pathinfo=0
file_uploads = On
upload_max_filesize = 50M
max_file_uploads = 20
allow_url_fopen = On
allow_url_include = Off
default_socket_timeout = 60
[Date]
date.timezone = PRC
[filter]
[iconv]
[sqlite]
[Pcre]
[Syslog]
define_syslog_variables = Off
[mail function]
SMTP = localhost
smtp_port = 25
[SQL]
sql.safe_mode = Off
[ODBC]
odbc.allow_persistent = On
odbc.check_persistent = On
odbc.max_persistent = -1
odbc.max_links = -1
odbc.defaultlrl = 4096
odbc.defaultbinmode = 1
[MySQL]
mysql.allow_persistent = On
mysql.max_persistent = -1
mysql.max_links = -1
mysql.default_port =
mysql.default_socket =
mysql.default_host =
mysql.default_user =
mysql.default_password =
mysql.connect_timeout = 60
mysql.trace_mode = Off
[MySQLi]
mysqli.max_links = -1
mysqli.default_port = 3306
mysqli.default_socket =
mysqli.default_host =
mysqli.default_user =
mysqli.default_pw =
mysqli.reconnect = Off
[mSQL]
msql.allow_persistent = On
msql.max_persistent = -1
msql.max_links = -1
[OCI8]
[PostgresSQL]
pgsql.allow_persistent = On
pgsql.auto_reset_persistent = Off
pgsql.max_persistent = -1
pgsql.max_links = -1
pgsql.ignore_notice = 0
pgsql.log_notice = 0
[Sybase]
sybase.allow_persistent = On
sybase.max_persistent = -1
sybase.max_links = -1
sybase.min_error_severity = 10
sybase.min_message_severity = 10
sybase.compatability_mode = Off
[Sybase-CT]
sybct.allow_persistent = On
sybct.max_persistent = -1
sybct.max_links = -1
sybct.min_server_severity = 10
sybct.min_client_severity = 10
[bcmath]
bcmath.scale = 0
[browscap]
[Informix]
ifx.default_host =
ifx.default_user =
ifx.default_password =
ifx.allow_persistent = On
ifx.max_persistent = -1
ifx.max_links = -1
ifx.textasvarchar = 0
ifx.byteasvarchar = 0
ifx.charasvarchar = 0
ifx.blobinfile = 0
ifx.nullformat = 0
[Session]
session.save_handler = files
session.use_cookies = 1
session.name = PHPSESSID
session.auto_start = 0
session.cookie_lifetime = 0
session.cookie_path = /
session.cookie_domain =
session.cookie_httponly =
session.serialize_handler = php
session.gc_probability = 1
session.gc_divisor
= 100
session.gc_maxlifetime = 1440
session.bug_compat_42 = 1
session.bug_compat_warn = 1
session.referer_check =
session.entropy_length = 0
session.entropy_file =
session.cache_limiter = nocache
session.cache_expire = 180
session.use_trans_sid = 0
session.hash_function = 0
session.hash_bits_per_character = 4
url_rewriter.tags =
"a=href,area=href,frame=src,input=src,form=,fieldset="
[MSSQL]
mssql.allow_persistent = On
mssql.max_persistent = -1
mssql.max_links = -1
mssql.min_error_severity = 10
mssql.min_message_severity = 10
mssql.compatability_mode = Off
mssql.secure_connection = Off
[Assertion]
[COM]
[mbstring]
[FrontBase]
[gd]
[exif]
[Tidy]
tidy.clean_output = Off
[soap]
soap.wsdl_cache_enabled=1
soap.wsdl_cache_dir="/tmp"
soap.wsdl_cache_ttl=86400
[Zend Optimizer]
zend_extension =
/usr/local/php/lib/php/extensions/no-debug-non-zts-20121212/opcache.so
zend_loader.enable = 1
zend_loader.disable_licensing = 0
zend_loader.obfuscation_level_support = 3

8.編輯php-fpm.conf配置文件：
cp /usr/local/php/etc/php-fpm.conf.default
/usr/local/php/etc/php-fpm.conf
vim /usr/local/php/etc/php-fpm.conf
[global]
pid = /home/php/pid/php-fpm.pid
error_log = /home/php/log/php-fpm_error.log
log_level = notice
[www]
listen = 127.0.0.1:9000
listen.backlog = -1
listen.allowed_clients = 127.0.0.1
listen.owner = www
listen.group = www
listen.mode = 0666
user = www
group = www
pm = dynamic
pm.max_children = 10
pm.start_servers = 2
pm.min_spare_servers = 1
pm.max_spare_servers = 6
request_terminate_timeout = 100
request_slowlog_timeout = 0
slowlog = /home/php/log/slow.log

9.編寫php-fpm啟動腳本
vim /etc/init.d/php-fpm
#!/bin/sh
# chkconfig:
2345 90
10
#
Description:
Start and
Stop php-fpm
# Provides:

php-fpm
#
Default-Start:
2 3 4 5
#
Default-Stop:
0 1 6
prefix=/usr/local/php
exec_prefix=${prefix}
php_fpm_BIN=${prefix}/sbin/php-fpm
php_fpm_CONF=${prefix}/etc/php-fpm.conf
php_fpm_PID=/home/php/pid/php-fpm.pid
php_opts="--fpm-config $php_fpm_CONF --pid $php_fpm_PID"
wait_for_pid () {
try=0
while test $try -lt 35 ; do
case "$1" in
'created')
if [ -f "$2" ] ; then
try=''
break
fi
;;
'removed')
if [ ! -f "$2" ] ; then
try=''
break
fi
;;
esac
echo -n .
try=`expr $try + 1`
sleep 1
done
}
case "$1" in
start)
echo -n "Starting php-fpm..."
$php_fpm_BIN --daemonize $php_opts
if [ "$?" != 0 ] ; then
echo " failed"
exit 1
fi
wait_for_pid created $php_fpm_PID
if [ -n "$try" ] ; then
echo " failed"
exit 1
else
echo " done"
fi
;;
stop)
echo -n "Stoping php-fpm..."
if [ ! -r $php_fpm_PID ] ; then
echo "warning, no pid file found - php-fpm is not running ?"
exit 1
fi
kill -QUIT `cat $php_fpm_PID`
wait_for_pid removed $php_fpm_PID
if [ -n "$try" ] ; then
echo " failed. Use force-quit"
exit 1
else
echo " done"
fi
;;
force-quit)
echo -n "Terminating php-fpm "
if [ ! -r $php_fpm_PID ] ; then
echo "warning, no pid file found - php-fpm is not running ?"
exit 1
fi
kill -TERM `cat $php_fpm_PID`
wait_for_pid removed $php_fpm_PID
if [ -n "$try" ] ; then
echo " failed"
exit 1
else
echo " done"
fi
;;
restart)
$0 stop
$0 start
;;
reload)
echo -n "Reload service php-fpm "
if [ ! -r $php_fpm_PID ] ; then
echo "warning, no pid file found - php-fpm is not running ?"
exit 1
fi
kill -USR2 `cat $php_fpm_PID`
echo " done"
;;
*)
echo "Usage: $0 {start|stop|force-quit|restart|reload}"
exit 1
;;
esac

10.創建目錄並修改許可權，重啟nginx服務：
mkdir -p /home/php/log
mkdir -p /home/php/pid
chown -R www:www /home/php/log
chown -R www:www /home/php/pid
service nginx restart

11.添加php-fpm系統服務：
chmod +x /etc/init.d/php-fpm
chkconfig --add php-fpm
chkconfig --level 2345 php-fpm on
chkconfig --list | grep php-fpm

12.啟動php-fpm服務：
service php-fpm start
ps -aux | grep php-fpm
netstat -anptu | grep 9000

13.配置php測試頁：
vim /home/www/html/phpinfo.php

F. 如何在centos7上安裝php

您好，安裝PHP的方式可以一步一步的按照教程去安裝，這個可以到網上搜一搜，因為步驟太多，我就不復制粘貼了。但是我這里最推薦的就是使用phpstudy一鍵安裝，沒錯，就是在Linux上一鍵安裝，可以去試一試。

黑馬程序員的PHP是國內最早開設的真正人工智慧課程。課程全面系統，緊跟時代潮流。

G. 阿里雲默認centos7上怎麼安裝php

首先更新系統軟體</str>
$ yum update
安裝nginx</str></str>
1.安裝nginx源
$ yum localinstall http://nginx.org/packages/centos/7/noarch/RPMS/nginx-release-centos-7-0.el7.ngx.noarch.rpm2.安裝nginx
$ yum install nginx
3.啟動nginx
$ service nginx start
Redirecting to /bin/systemctl start nginx.service4.訪問http://你的ip/
如果成功安裝會出來nginx默認的歡迎界面
安裝MySQL5.7.*
</str>
1.安裝mysql源</str>
$ yum localinstall http://dev.mysql.com/get/mysql57-community-release-el7-7.noarch.rpm2.安裝mysql
$ yum install mysql-community-server
確認一下mysql的版本，有時可能會提示mysql5.63.安裝mysql的開發包，以後會有用
$ yum install mysql-community-devel
4.啟動mysql
$ service mysqld start
Redirecting to /bin/systemctl start mysqld.service5.查看mysql啟動狀態
$ service mysqld status
出現pid
證明啟動成功
6.獲取mysql默認生成的密碼
$ grep 'temporary password' /var/log/mysqld.log2015-12-05T05:41:09.104758Z 1 [Note] A temporary password is generated for root@localhost: %G1Rgns!dD!v</str>
加粗的就是生成的密碼
7.換成自己的密碼
$ mysql -uroot -p
Enter password:輸入上面的密碼
成功輸入後進入一下步，這里你估計會輸入 好幾次才進去8. 更換密碼
mysql> ALTER USER 'root'@'localhost' IDENTIFIED BY 'MyNewPass4!';這個密碼一定要足夠復雜，不然會不讓你改，提示密碼不合法;9.退出mysql;
mysql> quit;
10.用新密碼再登錄，試一下新密碼
$ mysql -uroot -p
Enter password:輸入你的新密碼
11.確認密碼正確後，退出mysql;
mysql> quit;
編譯安裝php7.0.0
</str>
</str>
1.下載php7源碼包</str>
$ cd /root & wget -O php7.tar.gz http://cn2.php.net/get/php-7.0.1.tar.gz/from/this/mirror2.解壓源碼包</str>
$ tar -xvf php7.tar.gz
3.</str>
$ cd php-7.0.1
4.安裝php依賴包</str>
</str>
$ yum install libxml2 libxml2-devel openssl openssl-devel bzip2 bzip2-devel libcurl libcurl-devel libjpeg libjpeg-devel libpng libpng-devel freetype freetype-devel gmp gmp-devel libmcrypt libmcrypt-devel readline readline-devel libxslt libxslt-devel5.編譯配置，這一步我們會遇到很多configure error，我們一一解決，基本都是相關軟體開發包沒有安裝導致</str>
</str>
$ ./configure \
--prefix=/usr/local/php \
--with-config-file-path=/etc \
--enable-fpm \
--with-fpm-user=nginx \
--with-fpm-group=nginx \
--enable-inline-optimization \
--disable-debug \
--disable-rpath \
--enable-shared \
--enable-soap \
--with-libxml-dir \
--with-xmlrpc \
--with-openssl \
--with-mcrypt \
--with-mhash \
--with-pcre-regex \
--with-sqlite3 \
--with-zlib \
--enable-bcmath \
--with-iconv \
--with-bz2 \
--enable-calendar \
--with-curl \
--with-cdb \
--enable-dom \
--enable-exif \
--enable-fileinfo \
--enable-filter \
--with-pcre-dir \
--enable-ftp \
--with-gd \
--with-openssl-dir \
--with-jpeg-dir \
--with-png-dir \
--with-zlib-dir \
--with-freetype-dir \
--enable-gd-native-ttf \
--enable-gd-jis-conv \
--with-gettext \
--with-gmp \
--with-mhash \
--enable-json \
--enable-mbstring \
--enable-mbregex \
--enable-mbregex-backtrack \
--with-libmbfl \
--with-onig \
--enable-pdo \
--with-mysqli=mysqlnd \
--with-pdo-mysql=mysqlnd \
--with-zlib-dir \
--with-pdo-sqlite \
--with-readline \
--enable-session \
--enable-shmop \
--enable-simplexml \
--enable-sockets \
--enable-sysvmsg \
--enable-sysvsem \
--enable-sysvshm \
--enable-wddx \
--with-libxml-dir \
--with-xsl \
--enable-zip \
--enable-mysqlnd-compression-support \
--with-pear \
--enable-opcache
configure error:
1.configure: error: xml2-config not found. Please check your libxml2 installation.
解決：
$ yum install libxml2 libxml2-devel
2.configure: error: Cannot find OpenSSL's <evp.h>
解決：
$ yum install openssl openssl-devel
3.configure: error: Please reinstall the BZip2 distribution解決：
$ yum install bzip2 bzip2-devel
4.configure: error: Please reinstall the libcurl distribution - easy.h should be in <curl-dir>/include/curl/解決：
$ yum install libcurl libcurl-devel
5.If configure fails try --with-webp-dir=<DIR> configure: error: jpeglib.h not found.
解決：
$ yum install libjpeg libjpeg-devel
6.If configure fails try --with-webp-dir=<DIR>
checking for jpeg_read_header in -ljpeg... yesconfigure: error: png.h not found.
解決：
$ yum install libpng libpng-devel
7.If configure fails try --with-webp-dir=<DIR>
checking for jpeg_read_header in -ljpeg... yeschecking for png_write_image in -lpng... yesIf configure fails try --with-xpm-dir=<DIR>
configure: error: freetype-config not found.
解決：
$ yum install freetype freetype-devel
8.configure: error: Unable to locate gmp.h解決：
$ yum install gmp gmp-devel
9.configure: error: mcrypt.h not found. Please reinstall libmcrypt.
解決：
$ yum install libmcrypt libmcrypt-devel
10.configure: error: Please reinstall readline - I cannot find readline.h解決：
$ yum install readline readline-devel
11.configure: error: xslt-config not found. Please reinstall the libxslt >= 1.1.0 distribution解決：
$ yum install libxslt libxslt-devel
6.編譯與安裝
$ make && make install
這里要make好久，要耐心一下
7.添加 PHP 命令到環境變數
$ vim /etc/profile
在末尾加入
PATH=$PATH:/usr/local/php/bin
export PATH
要使改動立即生效執行
$ ./etc/profile
或
$ source /etc/profile
查看環境變數
$ echo $PATH
查看php版本
$ php -v
8.配置php-fpm
$ cp php.ini-proction /etc/php.ini
$ cp /usr/local/php/etc/php-fpm.conf.default /usr/local/php/etc/php-fpm.conf$ cp /usr/local/php/etc/php-fpm.d/www.conf.default /usr/local/php/etc/php-fpm.d/www.conf$ cp sapi/fpm/init.d.php-fpm /etc/init.d/php-fpm$ chmod +x /etc/init.d/php-fpm
9.啟動php-fpm
$ /etc/init.d/php-fpm start
配置nginx虛擬機,綁定域名</str>
1.
</str>
$ vim /etc/nginx/conf.d/php7.thinkcmf.com.conf這里可以把php7.thinkcmf.com.conf改成自己的域名把下面的內容復制到php7.thinkcmf.com.conf里server{
listen 80;
server_name php7.thinkcmf.com;
root /var/www/html/php7.thinkcmf.com; # 該項要修改為你准備存放相關網頁的路徑location / {
index index.php index.html index.htm;
#如果請求既不是一個文件，也不是一個目錄，則執行一下重寫規則if (!-e $request_filename)
{
#地址作為將參數rewrite到index.php上。
rewrite ^/(.*)$ /index.php/$1;
#若是子目錄則使用下面這句，將subdir改成目錄名稱即可。
#rewrite ^/subdir/(.*)$ /subdir/index.php/$1;}
}
#proxy the php scripts to php-fpm
location ~ \.php {
include fastcgi_params;
##pathinfo支持start
#定義變數 $path_info ，用於存放pathinfo信息set $path_info "";
#定義變數 $real_script_name，用於存放真實地址set $real_script_name $fastcgi_script_name;#如果地址與引號內的正則表達式匹配
if ($fastcgi_script_name ~ "^(.+?\.php)(/.+)$") {#將文件地址賦值給變數 $real_script_name
set $real_script_name $1;
#將文件地址後的參數賦值給變數 $path_info
set $path_info $2;
}
#配置fastcgi的一些參數
fastcgi_param SCRIPT_FILENAME $document_root$real_script_name;fastcgi_param SCRIPT_NAME $real_script_name;fastcgi_param PATH_INFO $path_info;
###pathinfo支持end
fastcgi_intercept_errors on;
fastcgi_pass 127.0.0.1:9000;
}
}
2.重啟nginx
$ service nginx reload
3.
$ vim /var/www/html/php7.thinkcmf.com/index.php</str>
把下面的代碼復制到這個文件 里
<?php
phpinfo();
4.查看訪問http://php7.thinkcmf.com

H. 阿里雲上的centos 7.2怎麼yum安裝php 5.6

因之前通過網易的 centos 鏡像，將阿里雲的 centos 升級到最新版了，乘自己的項目尚未開始正式開發，遂將所有的相應環境都升級到最高。
查看 centos 版本：
[root@iZ23d ~]# cat /etc/centos-release
CentOS Linux release 7.2.1511 (Core)
1、刪除之前的 php 版本：
[root@iZ23d ~]# yum remove php* php-common
Loaded plugins: langpacks
Repository base is listed more than once in the configuration
Repository updates is listed more than once in the configuration
Repository extras is listed more than once in the configuration
Repository centosplus is listed more than once in the configuration
No Match for argument: php-5.4.16
No Match for argument: php-5.4.16.tar.gz
No Match for argument: php-7.0.1RC1
No Match for argument: php-7.0.1RC1.tar.gz
No Match for argument: phpMyAdmin-4.4.0.tar.gz
No Match for argument: php-common
No Packages marked for removal
2、rpm 安裝 Php7 相應的 yum源：
[root@iZ23d ~]# rpm -Uvh https://mirror.webtatic.com/yum/el7/webtatic-release.rpm
Retrieving https://mirror.webtatic.com/yum/el7/webtatic-release.rpm
warning: /var/tmp/rpm-tmp.LhJKKR: Header V4 RSA/SHA1 Signature, key ID 62e74ca5: NOKEY
Preparing... ################################# [100%]
package webtatic-release-7-3.noarch is already installed
3、 直接yum安裝php7：
[root@iZ23d ~]# yum install php70w
Loaded plugins: langpacks
Repository base is listed more than once in the configuration
Repository updates is listed more than once in the configuration
Repository extras is listed more than once in the configuration
Repository centosplus is listed more than once in the configuration
Resolving Dependencies
--> Running transaction check
。。。 【省略】
Warning: RPMDB altered outside of yum.
Installing : php70w-common-7.0.0-1.w7.x86_64 1/3
Installing : php70w-cli-7.0.0-1.w7.x86_64 2/3
Installing : php70w-7.0.0-1.w7.x86_64 3/3
Verifying : php70w-7.0.0-1.w7.x86_64 1/3
Verifying : php70w-common-7.0.0-1.w7.x86_64 2/3
Verifying : php70w-cli-7.0.0-1.w7.x86_64 3/3
Installed:
php70w.x86_64 0:7.0.0-1.w7
Dependency Installed:
php70w-cli.x86_64 0:7.0.0-1.w7 php70w-common.x86_64 0:7.0.0-1.w7
Complete!
4、檢查 php 版本：
[root@iZ23d ~]# php -v
PHP 7.0.0 (cli) (built: Dec 2 2015 20:42:32) ( NTS )
Copyright (c) 1997-2015 The PHP Group
Zend Engine v3.0.0, Copyright (c) 1998-2015 Zend Technologies
[root@iZ23d2e6hoqZ ~]#
以上顯示安裝成功！
5、重啟 Apache，查看 phpinfo :
[root@iZ23d ~]# systemctl restart httpd.service
檢查phpinfo:
PHP Version 7.0.0
SystemLinux iZ23d 3.10.0-229.11.1.el7.x86_64 #1 SMP Thu Aug 6 01:06:18 UTC 2015 x86_64
Build DateDec 2 2015 20:43:38
Server APIApache 2.0 Handler
Virtual Directory Supportdisabled
Configuration File (php.ini) Path/etc
Loaded Configuration File/etc/php.ini
Scan this dir for additional .ini files/etc/php.d
Additional .ini files parsed/etc/php.d/bz2.ini, /etc/php.d/calendar.ini, /etc/php.d/ctype.ini, /etc/php.d/curl.ini, /etc/php.d/exif.ini, /etc/php.d/fileinfo.ini, /etc/php.d/ftp.ini, /etc/php.d/gettext.ini, /etc/php.d/gmp.ini, /etc/php.d/iconv.ini, /etc/php.d/json.ini, /etc/php.d/phar.ini, /etc/php.d/shmop.ini, /etc/php.d/simplexml.ini, /etc/php.d/sockets.ini, /etc/php.d/tokenizer.ini, /etc/php.d/xml.ini, /etc/php.d/zip.ini
PHP API20151012
PHP Extension20151012
Zend Extension320151012
Zend Extension BuildAPI320151012,NTS
PHP Extension BuildAPI20151012,NTS
Debug Buildno
Thread Safetydisabled
Zend Signal Handlingdisabled
Zend Memory Managerenabled
Zend Multibyte Supportdisabled
IPv6 Supportenabled
DTrace Supportenabled
Registered PHP Streamshttps, ftps, compress.zlib, php, file, glob, data, http, ftp, compress.bzip2, phar, zip
Registered Stream Socket Transportstcp, udp, unix, udg, ssl, sslv3, sslv2, tls, tlsv1.0, tlsv1.1, tlsv1.2
Registered Stream Filterszlib.*, string.rot13, string.toupper, string.tolower, string.strip_tags, convert.*, consumed, dechunk, bzip2.*, convert.iconv.*
This program makes use of the Zend Scripting Language Engine:
Zend Engine v3.0.0, Copyright (c) 1998-2015 Zend Technologies
Configuration
apache2handler
Apache VersionApache/2.4.6 (CentOS)
Apache API Version20120211
Server [email protected]
Hostname:Portxxxx.xxxxx.xxx:0
User/Groupapache(48)/48
Max RequestsPer Child: 0 - Keep Alive: on - Max Per Connection: 100
TimeoutsConnection: 60 - Keep-Alive: 15
Virtual ServerYes
Server Root/etc/httpd
Loaded Molescore mod_so http_core mod_access_compat mod_actions mod_alias mod_allowmethods mod_auth_basic mod_auth_digest mod_authn_anon mod_authn_core mod_authn_dbd mod_authn_dbm mod_authn_file mod_authn_socache mod_authz_core mod_authz_dbd mod_authz_dbm mod_authz_groupfile mod_authz_host mod_authz_owner mod_authz_user mod_autoindex mod_cache mod_cache_disk mod_data mod_dbd mod_deflate mod_dir mod_mpio mod_echo mod_env mod_expires mod_ext_filter mod_filter mod_headers mod_include mod_info mod_log_config mod_logio mod_mime_magic mod_mime mod_negotiation mod_remoteip mod_reqtimeout mod_rewrite mod_setenvif mod_slotmem_plain mod_slotmem_shm mod_socache_dbm mod_socache_memcache mod_socache_shmcb mod_status mod_substitute mod_suexec mod_unique_id mod_unixd mod_userdir mod_version mod_vhost_alias mod_dav mod_dav_fs mod_dav_lock mod_lua prefork mod_proxy mod_lbmethod_bybusyness mod_lbmethod_byrequests mod_lbmethod_bytraffic mod_lbmethod_heartbeat mod_proxy_ajp mod_proxy_balancer mod_proxy_connect mod_proxy_express mod_proxy_fcgi mod_proxy_fdpass mod_proxy_ftp mod_proxy_http mod_proxy_scgi mod_proxy_wstunnel mod_ssl mod_systemd mod_cgi mod_perl mod_php7
以上顯示 php7 安裝成功！

I. 請教centos php 多版本安裝共存切換

Linux下部署php多版本共存
背景說明
自php7問世，身為最新版本控的我馬上升級體驗，但是由於伺服器上還有舊程序在運行，只好部署一個php多版本共存環境。
現有環境是lnmp
- CentOS 6.7
- nginx 1.10.1
- mariadb-10.0.26
- php 7.0.8
為了更好兼容舊的php程序，推薦使用5.4.45. 主要是兼容mysql擴展。
開始安裝
首先要下載php-5.4.45.tar.gz源碼包。
通過源碼安裝
# tar xzvf php-5.4.45.tar.gz
# cd php-5.4.45

# ./configure --prefix=/usr/local/php54 --with-config-file-path=/usr/local/php54/etc --enable-fpm --with-fpm-user=www --with-fpm-group=www --with-mysql=mysqlnd --with-mysqli=mysqlnd --with-pdo-mysql=mysqlnd --with-iconv-dir --with-freetype-dir=/usr/local/freetype --with-jpeg-dir --with-png-dir --with-zlib --with-libxml-dir=/usr --enable-xml --disable-rpath --enable-bcmath --enable-shmop --enable-sysvsem --enable-inline-optimization --with-curl --enable-mbregex --enable-mbstring --with-mcrypt --enable-ftp --with-gd --enable-gd-native-ttf --with-openssl --with-mhash --enable-pcntl --enable-sockets --with-xmlrpc --enable-zip --enable-soap --with-gettext --disable-fileinfo --enable-intl --with-xsl

# make ZEND_EXTRA_LIBS='-liconv'
# make install
# cp php.ini-proction /usr/local/php/etc/php.ini

------------------------------------------------------------------------------------------------
php.ini 配置
post_max_size = 50M
upload_max_filesize = 50M
date.timezone = PRC
short_open_tag = On
cgi.fix_pathinfo=0
max_execution_time = 300
disable_functions=passthru,exec,system,chroot,scandir,chgrp,chown,shell_exec,proc_open,proc_get_status,popen,ini_alter,ini_restore,dl,openlog,syslog,readlink,symlink,popepassthru,stream_socket_server
------------------------------------------------------------------------------------------------
php-fpm.conf 配置
------------------------------
# vim /usr/local/php/etc/php-fpm.conf1
[global]
pid = /usr/local/php54/var/run/php-fpm.pid
error_log = /usr/local/php54/var/log/php-fpm.log
log_level = notice

[www]
listen = /tmp/php54-cgi.sock
listen.backlog = -1
listen.allowed_clients = 127.0.0.1:9001
listen.owner = www
listen.group = www
listen.mode = 0666
user = www
group = www
pm = dynamic
pm.max_children = 40
pm.start_servers = 20
pm.min_spare_servers = 20
pm.max_spare_servers = 40
request_terminate_timeout = 100
request_slowlog_timeout = 0
slowlog = var/log/slow.log

----------------------------------------------------------------------------------
啟動 php-fpm
# cp sapi/fpm/init.d.php-fpm /etc/init.d/php54-fpm
# chmod +x /etc/init.d/php54-fpm
# /etc/init.d/php54-fpm start
-------------------------------------------------------------------------------------------
修改nginx配置，對需要的服務配置使用php-5.4.45
location ~ [^/]\.php(/|$)
{
try_files $uri =404;
fastcgi_pass unix:/tmp/php54-cgi.sock;
fastcgi_index index.php;
include fastcgi.conf;
}
----------------------------------------------------------------------------------------
配置php-5.4.45 的php54-fpm 開機自動啟動
# chkconfig --add php54-fpm
# chkconfig php54-fpm on

J. 如何在Centos的linux操作系統安裝php的memcache擴展

准備工作：
1、一台linux的伺服器

2、下載相應版本的php源碼，知道自己php的版本並且知道phpize的位置

3、懂基本的linux解壓命令和編譯
操作步驟：
1、通過ssh登陸到我們的伺服器，找到我們的phpize位置，如果不知道下載跟目前使用版本相同的php源碼重新編譯一下
2、下載memcached的源碼包，並解壓安裝

wgettar -zxvf memcache-3.0.8.tgz #解壓cd memcache-3.0.8 #進入源碼包/usr/local/php/bin/phpize #執行phpize./configure --with-php-config=/usr/local/php/php-config #准備編譯make && make install #編譯安裝

3、配置php.ini文件在最後面添加擴展進去

vim /etc/php.iniextension=memcache.so

4、重啟web伺服器，我用的是apache

service httpd restart

5、編寫一個phpinfo文件去查看有沒有安裝成功