vb文件加密解密

❶ 怎樣用VB編寫一個文件加密程序

位元組逐位倒排序加密法是以比特為單位的換位加密方法，用VB實現的具體演算法是：
(1) 以二進制模式打開源文件；
(2) 從源文件第I位讀取一個位元組，假設為字母「A」，得到「A」的ASCII值為65；
(3) 將65轉換成八位二進制串為「01000001」；
(4) 將「01000001」按位元組逐位倒排序得另一個八位二進制串「10000010」；
(5) 將「10000010」轉換成十進制再寫回源文件第I位置，完成一個位元組的加密；
(6) 重復(2)、(3)、(4)和(5)，直到所有位元組加密結束。
為了使程序模塊化，我們用函數過程ByteToBin完成將位元組型數據轉換成二進制串（其實質就是將十進制數轉換成八位二進制串）；用函數過程BinToByte將二進制串轉換成位元組型數據（實質是將八位二進制串轉換成十進制數）：用函數過程Reverse將八位二進制串逐位倒排序。具體程序如下：
Function ByteToBin(m As Byte) As String ' 將位元組型數據轉換成八位二進制字元串
Dim c$
c$ = ""
Do While m <> 0
r = m Mod 2
m = m \ 2
c$ = r & c$
Loop
c$ = Right("00000000" & c$, 8)
ByteToBin = c$
End Function
Function Reverse(m As String) As String ' 將八位二進制字元串顛倒順序
Dim i%, x$
x = ""
For i = 1 To 8
x = Mid(m, i, 1) & x
Next i
Reverse = x
End Function
Function BinToByte(m As String) As Byte ' 將八位二進制串轉換成十進制
Dim x As String * 1, y%, z%
z = 0
For i = 1 To 8
x = Mid(m, i, 1)
y = x * 2 ^ (8 - i)
z = z + y
Next i
BinToByte = z
End Function
Private Sub Command1_Click()
Dim x As Byte, i%, fname$
fname = InputBox("請輸入要加密的文件名！注意加上路徑名：")
If Dir(fname) = "" Then
MsgBox "文件不存在！"
Exit Sub
End If
Open fname For Binary As #1 ' 以二進制訪問模式打開待加悔穗扒密文件
For i = 1 To LOF(1) ' LOF函數是求文件長度的內部函數
Get #1, i, x ' 取出第i個位元組
x = BinToByte(Reverse(ByteToBin(x))) ' 這里調用了三個自定義函數
Put #1, i, x ' 將加密後的這個位元組寫回到文件原位置
Next i
Close
MsgBox "任務完成！"
End Sub
本例可以完成對任意文件的加密與解密，對同一文件作第一次處理為加密，第二次處理為解族搭密。要調試本程序，碧昌可用記事本在C盤根目錄下任意建立一個文本文件（假設為文件名為aaa.txt），其中的內容任意（可以包括字母、漢字、數字、回車符、換行符等）。運行本程序後，在輸入文件名的對話框中輸入文件名（如：「C:\aaa.txt」）後回車，即可完成對文件的加密。文件加密後，可以在記事本中打開該文件查看加密效果。如果想解密，可再次運行該程序並輸入相同文件名。

❷ 運用VB對文字進行加密解密

'這是我從網上找到的一段加密解密的代碼，很不錯，應該符合要求。
'文本框的multiline屬性是用來設置是否可以接受多行文本，只能在窗體上手工設置。
'文本框的scrollbars屬性是用來設置是否有垂直和水平滾動條的，也只能在窗體上手工設置。
'keyAscii不清楚是作什麼用的。
'兩個StrConv函數用的太好了，我沒想到能處理的這么簡單。

Option Explicit
Dim key() As Byte

Sub initkey() '這里為密匙，建議定義的復雜些，我這里僅僅是個示例
ReDim key(9)
key(0) = 12
key(1) = 43
key(2) = 53
key(3) = 67
key(4) = 78
key(5) = 82
key(6) = 91
key(7) = 245
key(8) = 218
key(9) = 190
End Sub

Function Pass_Encode(ByVal s As String) As String '加密
On Error GoTo myerr
initkey
Dim buff() As Byte
buff = StrConv(s, vbFromUnicode)
Dim i As Long, j As Long
Dim k As Long
k = UBound(key) + 1
For i = 0 To UBound(buff)
j = i Mod k
buff(i) = buff(i) Xor key(j)
Next
Dim mstr As String
mstr = ""
Dim outstr As String
Dim temps As String
For i = 0 To UBound(buff)
k = buff(i) \ Len(mstr)
j = buff(i) Mod Len(mstr)
temps = Mid(mstr, j + 1, 1) + Mid(mstr, k + 1, 1)
outstr = outstr + temps
Next
Pass_Encode = outstr
Exit Function
myerr:
Pass_Encode = ""
End Function

Function Pass_Decode(ByVal s As String) As String '解密
On Error GoTo myerr
initkey
Dim i As Long, j As Long
Dim k As Long, n As Long
Dim mstr As String
mstr = ""
Dim outstr As String
Dim temps As String
If Len(s) Mod 2 = 1 Then
Pass_Decode = ""
Exit Function
End If
Dim t1 As String
Dim t2 As String
Dim buff() As Byte
Dim m As Long
m = 0
For i = 1 To Len(s) Step 2
t1 = Mid(s, i, 1)
t2 = Mid(s, i + 1, 1)
j = InStr(1, mstr, t1)
k = InStr(1, mstr, t2)
n = j - 1 + (k - 1) * Len(mstr)
ReDim Preserve buff(m)
buff(m) = n
m = m + 1
Next
k = UBound(key) + 1
For i = 0 To UBound(buff)
j = i Mod k
buff(i) = buff(i) Xor key(j)
Next
Pass_Decode = StrConv(buff, vbUnicode)
Exit Function
myerr:
Pass_Decode = ""
End Function

Private Sub Command1_Click()
Text2.Text = Pass_Encode(Text1.Text)
Text3.Text = Pass_Decode(Text2.Text)
End Sub

❸ 用VB實現加密解密程序。

這里只給出按鈕事件的過程，加密演算法（函數）你自己想辦法：
設加密演算法函數名為encryptxt，解密演算法函數名為unencryptxt，不帶參數。
加密窗口「生成密文」按鈕事件：
Private sub 生成密文_Click()
Frame1.Caption = encryptxt (Text1.text)
End Sub

解密窗口「解密」按鈕事件：
Private Sub 解密_Click()
Frame2.Caption = unencryptxt(Rrame1.Caption)
End Sub

❹ VB 字元串加密解密[高分]

就這樣了，大概還行
Private Function Encrypt(ByVal StrSource As String) As String '加密
Dim BLowData As Byte
Dim BHigData As Byte
Dim i As Long
Dim k As Integer
Dim StrEncrypt As String
Dim StrChar As String
Dim KeyTemp As String
Dim Key1 As Byte
For k = 1 To 30
KeyTemp = KeyTemp & CStr(Int(Rnd * (9) + 1))
Next
Key1 = CByte(Mid(KeyTemp, 11, 1) & Mid(KeyTemp, 27, 1))
For i = 1 To Len(StrSource)
StrChar = Mid(StrSource, i, 1) '從待加密字元串中取出一個字元
BLowData = AscB(MidB(StrChar, 1, 1)) Xor Key1 '取字元的低位元組和Key1進行異或運算
SHigData = AscB(MidB(StrChar, 2, 1)) '取字元的高位元組
StrEncrypt = StrEncrypt & ChrB(BLowData) & ChrB(BHigData) '將運算後的數據合成新的字元
Next i
Encrypt = KeyTemp & StrEncrypt
End FunctionPrivate Function Decrypt(ByVal StrSource As String) As String '解密
Dim BLowData As Byte
Dim BHigData As Byte
Dim i As Long
Dim k As Integer
Dim StrDecrypt As String
Dim StrChar As String
Dim KeyTemp As String
Dim Key1 As Byte
KeyTemp = Mid(StrSource, 1, 30)
Key1 = CByte(Mid(KeyTemp, 11, 1) & Mid(KeyTemp, 27, 1))
For i = 31 To Len(StrSource)
StrChar = Mid(StrSource, i, 1) '從待解密字元串中取出一個字元
BLowData = AscB(MidB(StrChar, 1, 1)) Xor Key1 '取字元的低位元組和Key1進行異或運算
BHigData = AscB(MidB(StrChar, 2, 1)) '取字元的高位元組
StrDecrypt = StrDecrypt & ChrB(BLowData) & ChrB(BHigData) '將運算後的數據合成新的字元
Next i
Decrypt = StrDecryptEnd Function
Private Sub Command2_Click()
MsgBox Decrypt(InputBox(""))
End SubPrivate Sub Command1_Click()
Text1.Text = Encrypt(InputBox(""))
End Sub

❺ VB 加密與解密的程序代碼

加密：

PrivateFunction JiaMi(ByVal varPass As String) As String '參數varPass是需要加密的文本內容

Dim varJiaMi As String * 20

Dim varTmp As Double

Dim strJiaMi As String

Dim I

For I = 1 To Len(varPass)

varTmp = AscW(Mid$(varPass, I, 1))

varJiaMi = Str$(((((varTmp * 1.5) / 5.6) * 2.7) * I))

strJiaMi = strJiaMi & varJiaMi

NextI

JiaMi = strJiaMi

EndFunction

解密函數：

PrivateFunction JieMi(ByVal varPass As String) As String '參數varPass是需要解密的密文內容

Dim varReturn As String * 20

Dim varConvert As Double

Dim varFinalPass As String

Dim varKey As Integer

Dim varPasslenth As Long

varPasslenth = Len(varPass)

For I = 1 To varPasslenth / 20

varReturn = Mid(varPass, (I - 1) * 20 + 1, 20)

varConvert = Val(Trim(varReturn))

varConvert = ((((varConvert / 1.5) * 5.6) / 2.7) / I)

varFinalPass = varFinalPass & ChrW(Val(varConvert))

NextI

JieMi = varFinalPass

EndFunction

(5)vb文件加密解密擴展閱讀：

注意事項

編寫加密程序，將用戶輸入的一個英文句子加密為加密字元串，然後輸出加密字元串。假設句子長度不超過100個字元。

根據給定的句子加密函數原型SentenceEncoding，編寫函數SentenceEncoding調用給定的字元加密函數CharEncoding完成句子加密。

然後，編寫主程序提示用戶輸入英文句子，然後調用函數SentenceEncoding對句子加密，最後輸出加密後的蔽鉛句子。

字元加密規則為大寫字母和小寫字母均加密為其補碼, 我們定義ASCII碼值相加為』A』+』Z』即155的兩個大寫字母互為補碼，ASCII碼值相加改禪為』a』+』z』即219的兩個小寫字母互為補碼。

空格用@代替,句號以#代替,其它字元用句點代替。

函數原型：

void SentenceEncoding(char *soure,char *code);

功能：對待加密字元串source加密後保存加密字元串到code.

參數：char *soure，指向待加密句子的字元串指針；

char *code 指向加密字元串的字元串指針；

字元加密宏殲好函數代碼。

❻ 簡單VB.NET加密與解密

Private Function myEncrypt(ByVal Code As String) As String
Dim Result As String = ""

Dim CurrentChar As Char

For i As Integer = 0 To Code.Length - 1

CurrentChar = Code.Substring(i, 1)

Select Case Code.Substring(i, 1)
Case "Z"
Result &= "a"
Case "z"
Result &= "A"
Case Else
Result &= Chr(Asc(CurrentChar) + 1)
End Select
Next
Return Result
End Function

'vb.net 2005 調試通過

❼ 怎樣用VB給文件夾進行密碼加密

文件或文件夾的加密、解密

'此方法對 WinXP 系統有效，Win98 沒試驗過。小心：不能用於系統文件或文件夾，否則會使系統癱瘓。
'加密：利用 API 函數在文件或文件夾名稱末尾添上字元「..\」。比如，將文件夾「MyPath」更名為「MyPath..\」，在我的電腦中顯示的名稱就是「MyPath.」。系統會無法識別，此文件或文件夾就無法打開和修改，也無法刪除。著名的病毒 Autorun 就是玩的這個小把戲。
'解密：去掉文件或文件夾名稱末尾的字元「..\」

'將以下代碼復制到 VB 的窗體代碼窗口即可
'例子需控制項：Command1、Command2、Text1，均採用默認屬性設置
Private Const MAX_PATH = 260
Private Type FileTime ' 8 Bytes
LTime As Long
HTime As Long
End Type
Private Type Win32_Find_Data
dwFileAttributes As Long
ftCreationTime As FileTime
ftLastAccessTime As FileTime
ftLastWriteTime As FileTime
nFileSizeHigh As Long
nFileSizeLow As Long
dwReserved0 As Long
dwReserved1 As Long
cNameFile As String * MAX_PATH
cAlternate As String * 14
End Type
Private Declare Function MoveFileEx Lib "kernel32" Alias "MoveFileExA" (ByVal lpExistingFileName As String, ByVal lpNewFileName As String, ByVal dwFlags As Long) As Long
Private Declare Function GetShortPathName Lib "kernel32" Alias "GetShortPathNameA" (ByVal lpszLongPath As String, ByVal lpszShortPath As String, ByVal cchBuffer As Long) As Long
Private Declare Function FindFirstFile Lib "kernel32" Alias "FindFirstFileA" (ByVal lpNameFile As String, lpFindFileData As Win32_Find_Data) As Long
Private Declare Function FindNextFile Lib "kernel32" Alias "FindNextFileA" (ByVal hFindFile As Long, lpFindFileData As Win32_Find_Data) As Long
Private Declare Function FindClose Lib "kernel32" (ByVal hFindFile As Long) As Long
Private Sub Form_Load()
Text1.Text = "C:\MyPath"
Command1.Caption = "解密": Command2.Caption = "加密"
Me.Caption = "目錄或文件的加解密"
End Sub
Private Sub Command1_Click()
Call SetPathName(False) '解密
End Sub
Private Sub Command2_Click()
Call SetPathName(True) '加密
End Sub
Private Sub SetPathName(SetMi As Boolean)
Dim nName As String, NewName As String, nSort As String, nCap As String, dl As Long
nName = Trim(Text1.Text)
If Right(nName, 3) = "..\" Then nName = Left(nName, Len(nName) - 3)
If Right(nName, 1) = "\" Then nName = Left(nName, Len(nName) - 1)
If SetMi Then
NewName = nName & "..\"
Else
NewName = nName
nName = nName & "..\"
End If
If SetMi Then nCap = "加密" Else nCap = "解密"
nSort = GetShortName(nName) '轉變其中的 ..\
If nSort = "" Then
MsgBox "文件沒有找到：" & vbCrLf & nName, vbCritical, nCap
Exit Sub
End If
If MoveFileEx(nSort, NewName, 0) = 0 Then Exit Sub '文件更名：非零表示成功，支持只讀文件
MsgBox nCap & "成功：" & vbCrLf & nName, vbInformation, nCap
End Sub
Public Function GetShortName(F As String, Optional ShortAll As Boolean) As String
'轉變為短文件名，如果目錄或文件不存在就返回空。可用於判斷某目錄或文件是否存在
'不能直接用 API 函數 GetShortPathName， 因它不支持 ..\
'ShortAll=T 表示全部轉變為短名稱，否則只轉變其中的點點杠「..\」
Dim FondID As Long, ID1 As Long, S As Long, nPath As String
Dim nF As String, InfoF As Win32_Find_Data, qF As String, hF As String
Dim nName As String, nName1 As String

nF = F
Do
S = InStr(nF, "..\")
If S = 0 Then Exit Do
qF = Left(nF, S + 2): hF = Mid(nF, S + 3) '分為前後兩部分
CutPathName qF, nPath, nName
nName = LCase(nName)
qF = nPath & "\" & "*."
FondID = FindFirstFile(qF, InfoF) '-1表示失敗。查找所有文件（夾）
ID1 = FondID
Do
If FondID = Find_Err Or ID1 = 0 Then GoTo Exit1 '沒有找到符合條件的條目

nName1 = LCase(CutChr0(InfoF.cNameFile)) '文件（夾）名稱
If nName1 & ".\" = nName Then
nName1 = CutChr0(InfoF.cAlternate) '用短文件名代替
If hF = "" Then nF = nPath & "\" & nName1 Else nF = nPath & "\" & nName1 & "\" & hF
Exit Do
End If
ID1 = FindNextFile(FondID, InfoF) '查找下一個，0表示失敗
Loop
FindClose FondID
Loop

Exit1:
FindClose FondID

S = MAX_PATH: nName = String(S, vbNullChar)
ID1 = GetShortPathName(nF, nName, S) '返回實際位元組數，0表示失敗
If ID1 = 0 Then Exit Function

If ShortAll Then
If ID1 > S Then
S = ID1: nName = String(S, vbNullChar)
ID1 = GetShortPathName(nF, nName, S) '返回實際位元組數
End If
GetShortName = CutChr0(nName)
Else
GetShortName = nF
End If
End Function
Public Sub CutPathName(ByVal F As String, nPath As String, nName As String)
Dim I As Long, LenS As Long

LenS = Len(F)
For I = LenS - 1 To 2 Step -1
If Mid(F, I, 1) = "\" Then
nPath = Left(F, I - 1): nName = Mid(F, I + 1)
GoTo Exit1
End If
Next
nPath = F: nName = ""

Exit1:

If Right(nPath, 2) = ".." Then
nPath = nPath & "\"
Else
If Right(nPath, 1) = "\" Then nPath = Left(nPath, Len(nPath) - 1)
End If

If Right(nName, 1) = "\" And Right(nName, 3) <> "..\" Then nName = Left(nName, Len(nName) - 1)
End Sub
Private Function CutChr0(xx As String) As String
Dim S As Long
S = InStr(xx, vbNullChar)
If S > 0 Then CutChr0 = Left(xx, S - 1) Else CutChr0 = xx
End Function
'參考資料見下

❽ 用VB寫個簡單加密/解密程序

'圖上的控制項,你就照著擺上去,然後再把以下代碼拷進去,就OK了
Dim lg As Integer
'加密
Private Sub Command1_Click()
Text2 = ""
Dim a(), b() As String
lg = Len(Text1)
ReDim a(lg), b(lg)
For i = 1 To lg
a(i) = Mid(Text1, i, 1)
b(i) = AscW(a(i)) Xor 4
Text2 = Text2 & ChrW(b(i))
Next
End Sub
'解密
Private Sub Command2_Click()
Text3 = ""
Dim a(), b() As String
lg = Len(Text2)
ReDim a(lg), b(lg)
For i = 1 To lg
a(i) = Mid(Text2, i, 1)
b(i) = AscW(a(i)) Xor 4
Text3 = Text3 & ChrW(b(i))
Next
End Sub

❾ vb 文本的加密解密問題

Private Sub Command1_Click() Open App.Path & "\\aaa.txt" For Output As #1 Print #1, Enc(Text1.Text, 1) Close #1 Debug.Print "加密內容:" & Enc(Text1.Text, 1) MsgBox "加密文件已輸出!" End Sub Private Sub Command2_Click() Open App.Path & "\\aaa.txt" For Input As #1 Do While Not EOF(1) Line Input #1, tmp Text1.Text = deEnc(tmp, 1) Debug.Print "解密:" & tmp & "為:" & deEnc(tmp, 1) Loop Close #1 End Sub Function Enc(ByVal Str1 As String, ByVal EncCode As Long) As String ' EncCode為加密密碼,你可以自己修改 '日曜星君原創作品,QQ:575837484 Dim strEnc As String For i = 1 To Len(Str1) strEnc = strEnc & Chr(Asc(Mid(Str1, i, 1)) + EncCode) Next i Enc = strEnc End Function Function deEnc(ByVal Str1 As String, ByVal deEncCode As Long) As String ' EncCode為解密密碼,必須和加密密碼一樣,否則是亂碼! '日曜星君原創作品,QQ:575837484 Dim strDeEnc As String For i = 1 To Len(Str1) strDeEnc = strDeEnc & Chr(Asc(Mid(Str1, i, 1)) - deEncCode) Next i deEnc = strDeEnc End Functio

❿ 使用VB作出加密，解密並顯示密鑰

'這是我以前回答別人提問時寫的，添加三個文本框，一個按鈕。text3文本框中輸入要加密的
'文本，在text2中是加密的文本，在text1中是對加密的文本解密。加密和解密用同一個
'過程'Private Function JiaMi(a As String) As String

Private Sub Command1_Click()
Dim a As String
Dim b As String
a = Text3
For i = 1 To Len(a)
b = b & JiaMi(Mid(a, i, 1))
Next i
Text2 = b
a = Text2
b = ""
For i = 1 To Len(a)
b = b & JiaMi(Mid(a, i, 1))
Next i
Text1 = b
End Sub
Private Function JiaMi(a As String) As String
Dim IntAsc As Integer
IntAsc = Asc(a)
If IntAsc Mod 2 Then
IntAsc = IntAsc + 47
If IntAsc > 126 Then IntAsc = IntAsc - 47
Else
IntAsc = IntAsc - 47
If IntAsc < 33 Then IntAsc = IntAsc + 47
End If
JiaMi = Chr(IntAsc)
End Function